Looks good to me. Finn On Mon, 27 Sep 2010, Justin P. Mattock wrote: > Below is an updated patch to fix broken web addresses in the kernel. > Please let me know if I missed anything, and I'll go back and fix it. > and lastly Thanks for all the help with this... > > Signed-off-by: Justin P. Mattock <justinmattock@xxxxxxxxx> > Cc: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx> > Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> > Cc: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx> > Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxx> > Cc: Matt Turner <mattst88@xxxxxxxxx> > Cc: Dimitry Torokhov <dmitry.torokhov@xxxxxxxxx> > Cc: Mike Frysinger <vapier.adi@xxxxxxxxx> > Acked-by: Ben Pfaff <blp@xxxxxxxxxxxxxxx> > Acked-by: Hans J. Koch <hjk@xxxxxxxxxxxxx> > > --- > drivers/ata/pata_it821x.c | 4 ++-- > drivers/atm/Kconfig | 2 +- > drivers/char/agp/Kconfig | 2 +- > drivers/char/agp/i460-agp.c | 2 +- > drivers/char/apm-emulation.c | 4 ++-- > drivers/char/ipmi/ipmi_bt_sm.c | 2 +- > drivers/char/ipmi/ipmi_si_intf.c | 3 +-- > drivers/char/n_r3964.c | 1 - > drivers/char/pcmcia/Kconfig | 4 ++-- > drivers/char/tpm/Kconfig | 2 +- > drivers/char/tpm/tpm_infineon.c | 2 +- > drivers/edac/edac_device_sysfs.c | 2 +- > drivers/edac/i82443bxgx_edac.c | 2 +- > drivers/firmware/Kconfig | 4 ++-- > drivers/firmware/edd.c | 2 +- > drivers/firmware/pcdp.h | 4 ++-- > drivers/gpu/drm/drm_modes.c | 2 +- > drivers/hwmon/adm1025.c | 2 +- > drivers/hwmon/adm1026.c | 2 +- > drivers/hwmon/f75375s.c | 4 ++-- > drivers/hwmon/g760a.c | 2 +- > drivers/hwmon/hwmon-vid.c | 2 +- > drivers/ide/hpt366.c | 2 +- > drivers/ide/ht6560b.c | 1 - > drivers/infiniband/Kconfig | 4 ++-- > drivers/infiniband/hw/cxgb3/Kconfig | 2 +- > drivers/infiniband/hw/cxgb4/Kconfig | 2 +- > drivers/infiniband/ulp/iser/Kconfig | 2 +- > drivers/input/joystick/gamecon.c | 3 +-- > drivers/input/misc/cm109.c | 2 +- > drivers/input/mouse/Kconfig | 1 + > drivers/input/mouse/touchkit_ps2.c | 4 ++-- > drivers/input/touchscreen/mk712.c | 2 +- > drivers/isdn/i4l/isdn_audio.c | 2 +- > drivers/macintosh/therm_adt746x.c | 6 +++--- > drivers/media/IR/keymaps/rc-manli.c | 1 - > drivers/media/dvb/ttpci/av7110.c | 10 ++-------- > drivers/media/dvb/ttpci/av7110_av.c | 2 +- > drivers/media/dvb/ttpci/av7110_ca.c | 2 +- > drivers/media/dvb/ttpci/av7110_hw.c | 2 +- > drivers/media/dvb/ttpci/av7110_v4l.c | 2 +- > drivers/media/dvb/ttpci/budget-av.c | 2 +- > drivers/media/dvb/ttpci/budget-ci.c | 2 +- > drivers/media/dvb/ttpci/budget-core.c | 2 +- > drivers/media/dvb/ttpci/budget-patch.c | 2 +- > drivers/media/dvb/ttpci/budget.c | 2 +- > drivers/media/radio/radio-maxiradio.c | 2 +- > drivers/media/radio/radio-typhoon.c | 2 -- > drivers/media/video/Kconfig | 2 +- > drivers/media/video/cafe_ccic.c | 2 +- > drivers/media/video/cx18/cx18-cards.c | 2 +- > drivers/media/video/cx23885/cx23885-417.c | 2 +- > drivers/media/video/cx88/cx88-blackbird.c | 2 +- > drivers/media/video/ivtv/ivtv-cards.c | 2 +- > drivers/media/video/mxb.c | 2 +- > drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 - > drivers/misc/Kconfig | 4 ++-- > drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- > drivers/mtd/devices/lart.c | 2 +- > drivers/mtd/ftl.c | 2 +- > drivers/mtd/maps/Kconfig | 4 ++-- > drivers/mtd/nand/cafe_nand.c | 2 +- > drivers/net/Kconfig | 21 ++++++++++----------- > drivers/net/appletalk/Kconfig | 2 +- > drivers/net/atp.c | 2 +- > drivers/net/epic100.c | 4 ++-- > drivers/net/hamradio/Kconfig | 2 +- > drivers/net/ibmlana.c | 2 +- > drivers/net/irda/donauboe.h | 2 +- > drivers/net/pci-skeleton.c | 2 +- > drivers/net/pcmcia/3c574_cs.c | 2 +- > drivers/net/sc92031.c | 2 +- > drivers/net/tlan.c | 2 +- > drivers/net/tokenring/tms380tr.c | 2 +- > drivers/net/tulip/Kconfig | 2 +- > drivers/net/usb/plusb.c | 2 +- > drivers/net/wan/Kconfig | 2 +- > drivers/net/wireless/ath/ath5k/ath5k.h | 2 +- > drivers/net/wireless/ath/ath5k/reg.h | 1 - > drivers/net/wireless/p54/Kconfig | 6 +++--- > drivers/net/wireless/prism54/islpci_hotplug.c | 2 +- > drivers/parisc/README.dino | 3 +-- > drivers/pci/quirks.c | 3 ++- > drivers/pcmcia/yenta_socket.c | 2 +- > drivers/pnp/pnpbios/proc.c | 1 - > drivers/scsi/Kconfig | 9 +++++---- > drivers/serial/8250.c | 2 +- > drivers/serial/bfin_sport_uart.c | 2 +- > drivers/serial/bfin_sport_uart.h | 2 +- > drivers/serial/uartlite.c | 2 +- > drivers/staging/asus_oled/README | 2 +- > drivers/staging/asus_oled/asus_oled.c | 2 +- > drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +- > drivers/staging/comedi/drivers/daqboard2000.c | 4 ++-- > drivers/staging/comedi/drivers/ni_labpc.c | 2 +- > drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- > drivers/staging/comedi/drivers/plx9080.h | 2 +- > drivers/staging/comedi/drivers/rtd520.c | 2 +- > drivers/staging/quickstart/quickstart.c | 3 +-- > drivers/uio/Kconfig | 6 +++--- > drivers/usb/serial/Kconfig | 4 ++-- > drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------ > drivers/usb/serial/keyspan.c | 2 +- > drivers/usb/serial/keyspan.h | 2 +- > drivers/usb/serial/mct_u232.h | 9 ++++----- > drivers/usb/storage/Kconfig | 2 +- > drivers/video/Kconfig | 10 +++++----- > drivers/video/arcfb.c | 1 - > drivers/video/epson1355fb.c | 2 +- > drivers/video/fbcvt.c | 2 +- > drivers/video/hecubafb.c | 2 +- > drivers/video/metronomefb.c | 2 +- > firmware/keyspan_pda/keyspan_pda.S | 2 +- > firmware/keyspan_pda/xircom_pgs.S | 2 +- > fs/hostfs/hostfs.h | 7 +------ > fs/partitions/ldm.c | 2 +- > fs/partitions/ldm.h | 2 +- > fs/reiserfs/Kconfig | 6 ++++-- > fs/reiserfs/README | 2 +- > include/crypto/gf128mul.h | 4 ++-- > include/linux/fdreg.h | 2 +- > include/linux/if_infiniband.h | 2 +- > include/linux/n_r3964.h | 1 - > net/ax25/Kconfig | 8 ++++---- > net/ipv4/Kconfig | 4 ++-- > net/ipv4/cipso_ipv4.c | 2 +- > net/ipv4/fib_trie.c | 2 +- > net/ipv4/netfilter/Kconfig | 2 +- > net/ipv4/tcp_illinois.c | 2 +- > net/ipv4/tcp_input.c | 4 ++-- > net/ipv4/tcp_veno.c | 2 +- > net/netfilter/nf_conntrack_proto_tcp.c | 4 ++-- > sound/oss/ac97_codec.c | 7 ++----- > sound/pci/ens1370.c | 2 +- > sound/pci/intel8x0.c | 2 +- > 135 files changed, 184 insertions(+), 209 deletions(-) > > diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c > index bf88f71..aa0e0c5 100644 > --- a/drivers/ata/pata_it821x.c > +++ b/drivers/ata/pata_it821x.c > @@ -15,8 +15,8 @@ > * May be copied or modified under the terms of the GNU General Public License > * Based in part on the ITE vendor provided SCSI driver. > * > - * Documentation available from > - * http://www.ite.com.tw/pc/IT8212F_V04.pdf > + * Documentation available from IT8212F_V04.pdf > + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 > * Some other documents are NDA. > * > * The ITE8212 isn't exactly a standard IDE controller. It has two > diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig > index be7461c..31c6010 100644 > --- a/drivers/atm/Kconfig > +++ b/drivers/atm/Kconfig > @@ -301,7 +301,7 @@ config ATM_IA > control memory (128K-1KVC, 512K-4KVC), the size of the packet > memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, > UTP155, UTP25, DS3 and E3). Go to: > - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM> > + <http://www.iphase.com/> > for more info about the cards. Say Y (or M to compile as a module > named iphase) here if you have one of these cards. > > diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig > index 4b66c69..c8ad619 100644 > --- a/drivers/char/agp/Kconfig > +++ b/drivers/char/agp/Kconfig > @@ -34,7 +34,7 @@ config AGP_ALI > X on the following ALi chipsets. The supported chipsets > include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. > For the ALi-chipset question, ALi suggests you refer to > - <http://www.ali.com.tw/eng/support/index.shtml>. > + <http://www.ali.com.tw/>. > > The M1541 chipset can do AGP 1x and 2x, but note that there is an > acknowledged incompatibility with Matrox G200 cards. Due to > diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c > index e763d33..75b763c 100644 > --- a/drivers/char/agp/i460-agp.c > +++ b/drivers/char/agp/i460-agp.c > @@ -1,7 +1,7 @@ > /* > * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of > * the "Intel 460GTX Chipset Software Developer's Manual": > - * http://developer.intel.com/design/itanium/downloads/24870401s.htm > + * http://www.intel.com/design/archives/itanium/downloads/248704.htm > */ > /* > * 460GX support by Chris Ahna <christopher.j.ahna@xxxxxxxxx> > diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c > index 033e150..0848ca9 100644 > --- a/drivers/char/apm-emulation.c > +++ b/drivers/char/apm-emulation.c > @@ -7,8 +7,8 @@ > * Intel Corporation, Microsoft Corporation. Advanced Power Management > * (APM) BIOS Interface Specification, Revision 1.2, February 1996. > * > - * [This document is available from Microsoft at: > - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] > + * This document is available from Microsoft at: > + * http://www.microsoft.com/whdc/archive/amp_12.mspx > */ > #include <linux/module.h> > #include <linux/poll.h> > diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c > index 7b98c06..3ed20e8 100644 > --- a/drivers/char/ipmi/ipmi_bt_sm.c > +++ b/drivers/char/ipmi/ipmi_bt_sm.c > @@ -2,7 +2,7 @@ > * ipmi_bt_sm.c > * > * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part > - * of the driver architecture at http://sourceforge.net/project/openipmi > + * of the driver architecture at http://sourceforge.net/projects/openipmi > * > * Author: Rocky Craig <first.last@xxxxxx> > * > diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c > index 7bd7c45..3e94c37 100644 > --- a/drivers/char/ipmi/ipmi_si_intf.c > +++ b/drivers/char/ipmi/ipmi_si_intf.c > @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) > > /* > * Defined at > - * http://h21007.www2.hp.com/portal/download/files > - * /unprot/hpspmi.pdf > + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf > */ > struct SPMITable { > s8 Signature[4]; > diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c > index a98290d..88dda0c 100644 > --- a/drivers/char/n_r3964.c > +++ b/drivers/char/n_r3964.c > @@ -4,7 +4,6 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig > index ffa0efc..6614416 100644 > --- a/drivers/char/pcmcia/Kconfig > +++ b/drivers/char/pcmcia/Kconfig > @@ -28,7 +28,7 @@ config CARDMAN_4000 > > This kernel driver requires additional userspace support, either > by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), > - or via the cm4000 backend of OpenCT (http://www.opensc.com/). > + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). > > config CARDMAN_4040 > tristate "Omnikey CardMan 4040 support" > @@ -41,7 +41,7 @@ config CARDMAN_4040 > in I/O space. To use the kernel driver, you will need either the > PC/SC ifdhandler provided from the Omnikey homepage > (http://www.omnikey.com/), or a current development version of OpenCT > - (http://www.opensc.org/). > + (http://www.opensc-project.org/opensc). > > config IPWIRELESS > tristate "IPWireless 3G UMTS PCMCIA card support" > diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig > index 4dc338f..f6595ab 100644 > --- a/drivers/char/tpm/Kconfig > +++ b/drivers/char/tpm/Kconfig > @@ -58,6 +58,6 @@ config TCG_INFINEON > To compile this driver as a module, choose M here; the module > will be called tpm_infineon. > Further information on this driver and the supported hardware > - can be found at http://www.prosec.rub.de/tpm > + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ > > endif # TCG_TPM > diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c > index f584407..76da32e 100644 > --- a/drivers/char/tpm/tpm_infineon.c > +++ b/drivers/char/tpm/tpm_infineon.c > @@ -7,7 +7,7 @@ > * Copyright (C) 2005, Marcel Selhorst <m.selhorst@xxxxxxxxxx> > * Sirrix AG - security technologies, http://www.sirrix.com and > * Applied Data Security Group, Ruhr-University Bochum, Germany > - * Project-Homepage: http://www.prosec.rub.de/tpm > + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ > * > * This program is free software; you can redistribute it and/or > * modify it under the terms of the GNU General Public License as > diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c > index 0709681..413f0df 100644 > --- a/drivers/edac/edac_device_sysfs.c > +++ b/drivers/edac/edac_device_sysfs.c > @@ -1,7 +1,7 @@ > /* > * file for managing the edac_device class of devices for EDAC > * > - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) > + * (C) 2007 SoftwareBitMaker > * > * This file may be distributed under the terms of the > * GNU General Public License. > diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c > index a2fa1fe..678405a 100644 > --- a/drivers/edac/i82443bxgx_edac.c > +++ b/drivers/edac/i82443bxgx_edac.c > @@ -12,7 +12,7 @@ > * 440GX fix by Jason Uhlenkott <juhlenko@xxxxxxxxxx>. > * > * Written with reference to 82443BX Host Bridge Datasheet: > - * http://www.intel.com/design/chipsets/440/documentation.htm > + * http://download.intel.com/design/chipsets/datashts/29063301.pdf > * references to this document given in []. > * > * This module doesn't support the 440LX, but it may be possible to > diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig > index 280c9b5..32e67a1 100644 > --- a/drivers/firmware/Kconfig > +++ b/drivers/firmware/Kconfig > @@ -73,8 +73,8 @@ config EFI_PCDP > on how the driver discovers devices. > > You must also enable the appropriate drivers (serial, VGA, etc.) > - > - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> > + See DIG64_HCDPv20_042804.pdf available from > + <http://www.dig64.org/specifications/> > > config DELL_RBU > tristate "BIOS update support for DELL systems via sysfs" > diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c > index f287fe7..96c25d9 100644 > --- a/drivers/firmware/edd.c > +++ b/drivers/firmware/edd.c > @@ -15,7 +15,7 @@ > * made in setup.S, copied to safe structures in setup.c, > * and presents it in sysfs. > * > - * Please see http://linux.dell.com/edd30/results.html for > + * Please see http://linux.dell.com/edd/results.html for > * the list of BIOSs which have been reported to implement EDD. > * > * This program is free software; you can redistribute it and/or modify > diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h > index ce910d6..e098c6e 100644 > --- a/drivers/firmware/pcdp.h > +++ b/drivers/firmware/pcdp.h > @@ -1,8 +1,8 @@ > /* > * Definitions for PCDP-defined console devices > * > - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf > - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf > + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.), > + * please see <http://www.dig64.org/specifications/> > * > * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. > * Khalid Aziz <khalid.aziz@xxxxxx> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 949326d..58e65f9 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); > * according to the hdisplay, vdisplay, vrefresh. > * It is based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. > * What I have done is to translate it by using integer calculation. > diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c > index 251b631..60befc0 100644 > --- a/drivers/hwmon/adm1025.c > +++ b/drivers/hwmon/adm1025.c > @@ -12,7 +12,7 @@ > * resolution of about 0.5% of the nominal value). Temperature values are > * reported with a 1 deg resolution and a 3 deg accuracy. Complete > * datasheet can be obtained from Analog's website at: > - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 > * > * This driver also supports the ADM1025A, which differs from the ADM1025 > * only in that it has "open-drain VID inputs while the ADM1025 has > diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c > index 65335b2..4bf969c 100644 > --- a/drivers/hwmon/adm1026.c > +++ b/drivers/hwmon/adm1026.c > @@ -6,7 +6,7 @@ > > Chip details at: > > - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> > + <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026> > > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c > index 9638d58..95cbfb3 100644 > --- a/drivers/hwmon/f75375s.c > +++ b/drivers/hwmon/f75375s.c > @@ -6,10 +6,10 @@ > * Datasheets available at: > * > * f75375: > - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf > + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf > * > * f75373: > - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf > + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c > index 1f63d1a..1d6a6fa 100644 > --- a/drivers/hwmon/g760a.c > +++ b/drivers/hwmon/g760a.c > @@ -5,7 +5,7 @@ > Copyright (C) 2007 Herbert Valerio Riedel <hvr@xxxxxxx> > > Complete datasheet is available at GMT's website: > - http://www.gmt.com.tw/datasheet/g760a.pdf > + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf > > This program is free software; you can redistribute it and/or modify > it under the terms of the GNU General Public License as published by > diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c > index bf0862a..897702d 100644 > --- a/drivers/hwmon/hwmon-vid.c > +++ b/drivers/hwmon/hwmon-vid.c > @@ -38,7 +38,7 @@ > * available at http://developer.intel.com/. > * > * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, > - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF > + * http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx > * Table 74. VID Code Voltages > * This corresponds to an arbitrary VRM code of 24 in the functions below. > * These CPU models (K8 revision <= E) have 5 VID pins. See also: > diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c > index 4516369..97d98fb 100644 > --- a/drivers/ide/hpt366.c > +++ b/drivers/ide/hpt366.c > @@ -12,7 +12,7 @@ > * > * > * HighPoint has its own drivers (open source except for the RAID part) > - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. > + * available from http://www.highpoint-tech.com/USA_new/service_support.htm > * This may be useful to anyone wanting to work on this driver, however do not > * trust them too much since the code tends to become less and less meaningful > * as the time passes... :-/ > diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c > index d81e496..808bcdc 100644 > --- a/drivers/ide/ht6560b.c > +++ b/drivers/ide/ht6560b.c > @@ -10,7 +10,6 @@ > * Author: Mikko Ala-Fossi <maf@xxxxxx> > * Jan Evert van Grootheest <j.e.van.grootheest@xxxxxxxxx> > * > - * Try: http://www.maf.iki.fi/~maf/ht6560b/ > */ > > #define DRV_NAME "ht6560b" > diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig > index 89d70de..6e35ecc 100644 > --- a/drivers/infiniband/Kconfig > +++ b/drivers/infiniband/Kconfig > @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD > Userspace InfiniBand Management Datagram (MAD) support. This > is the kernel side of the userspace MAD support, which allows > userspace processes to send and receive MADs. You will also > - need libibumad from <http://www.openib.org>. > + need libibumad from <http://www.openfabrics.org/downloads/management/>. > > config INFINIBAND_USER_ACCESS > tristate "InfiniBand userspace access (verbs and CM)" > @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS > to set up connections and directly access InfiniBand > hardware for fast-path operations. You will also need > libibverbs, libibcm and a hardware driver library from > - <http://www.openib.org>. > + <http://www.openfabrics.org/git/>. > > config INFINIBAND_USER_MEM > bool > diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig > index 2acec3f..2b6352b 100644 > --- a/drivers/infiniband/hw/cxgb3/Kconfig > +++ b/drivers/infiniband/hw/cxgb3/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig > index ccb85ea..6b7e6c5 100644 > --- a/drivers/infiniband/hw/cxgb4/Kconfig > +++ b/drivers/infiniband/hw/cxgb4/Kconfig > @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig > index b411c51..d00af71 100644 > --- a/drivers/infiniband/ulp/iser/Kconfig > +++ b/drivers/infiniband/ulp/iser/Kconfig > @@ -9,4 +9,4 @@ config INFINIBAND_ISER > > The iSER protocol is defined by IETF. > See <http://www.ietf.org/rfc/rfc5046.txt> > - and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF> > + and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF> > diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c > index 0ffaf2c..e68e497 100644 > --- a/drivers/input/joystick/gamecon.c > +++ b/drivers/input/joystick/gamecon.c > @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) > * PSX support > * > * See documentation at: > - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt > + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt > * http://www.gamesx.com/controldata/psxcont/psxcont.htm > - * ftp://milano.usal.es/pablo/ > * > */ > > diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c > index 2b0eba6..b09c7d1 100644 > --- a/drivers/input/misc/cm109.c > +++ b/drivers/input/misc/cm109.c > @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) > > /* > * Keymap for ATCom AU-100 > - * http://www.atcom.cn/En_products_AU100.html > + * http://www.atcom.cn/products.html > * http://www.packetizer.com/products/au100/ > * http://www.voip-info.org/wiki/view/AU-100 > * > diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig > index c714ca2..bf5fd7f 100644 > --- a/drivers/input/mouse/Kconfig > +++ b/drivers/input/mouse/Kconfig > @@ -30,6 +30,7 @@ config MOUSE_PS2 > <http://w1.894.telia.com/~u89404340/touchpad/index.html> > and a new version of GPM at: > <http://www.geocities.com/dt_or/gpm/gpm.html> > + <http://xorg.freedesktop.org/archive/individual/driver/> > to take advantage of the advanced features of the touchpad. > > If unsure, say Y. > diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c > index 88121c5..1fd8f5e 100644 > --- a/drivers/input/mouse/touchkit_ps2.c > +++ b/drivers/input/mouse/touchkit_ps2.c > @@ -21,8 +21,8 @@ > * > * Based upon touchkitusb.c > * > - * Vendor documentation is available in support section of: > - * http://www.egalax.com.tw/ > + * Vendor documentation is available at: > + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf > */ > > #include <linux/kernel.h> > diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c > index efd3aeb..36e57de 100644 > --- a/drivers/input/touchscreen/mk712.c > +++ b/drivers/input/touchscreen/mk712.c > @@ -17,7 +17,7 @@ > * found in Gateway AOL Connected Touchpad computers. > * > * Documentation for ICS MK712 can be found at: > - * http://www.icst.com/pdf/mk712.pdf > + * http://www.idt.com/products/getDoc.cfm?docID=18713923 > */ > > /* > diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c > index 861bdf3..d501393 100644 > --- a/drivers/isdn/i4l/isdn_audio.c > +++ b/drivers/isdn/i4l/isdn_audio.c > @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in, > > /* > * Goertzel algorithm. > - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/ > + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ > * for more info. > * Result is stored into an sk_buff and queued up for later > * evaluation. > diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c > index d0d2213..9e3e2c5 100644 > --- a/drivers/macintosh/therm_adt746x.c > +++ b/drivers/macintosh/therm_adt746x.c > @@ -3,9 +3,9 @@ > * > * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt > * > - * Documentation from > - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf > - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf > + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 > + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 > * > */ > > diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c > index 1e9fbfa..0f590b3 100644 > --- a/drivers/media/IR/keymaps/rc-manli.c > +++ b/drivers/media/IR/keymaps/rc-manli.c > @@ -13,7 +13,6 @@ > #include <media/rc-map.h> > > /* Michael Tokarev <mjt@xxxxxxxxxx> > - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg > keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at > least, and probably other cards too. > The "ascii-art picture" below (in comments, first row > diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c > index a6be529..87279d9 100644 > --- a/drivers/media/dvb/ttpci/av7110.c > +++ b/drivers/media/dvb/ttpci/av7110.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > > @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110) > /* Budgetpatch note: > * Original hardware design by Roberto Deza: > * There is a DVB_Wiki at > - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page > - * where is described this 'DVB TT Budget Patch', on Card Modding: > - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch > - * On the short description there is also a link to a external file, > - * with more details: > - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip > - * > + * http://www.linuxtv.org/ > * New software triggering design by Emard that works on > * original Roberto Deza's hardware: > * > diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c > index 13efba9..878da6a 100644 > --- a/drivers/media/dvb/ttpci/av7110_av.c > +++ b/drivers/media/dvb/ttpci/av7110_av.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/types.h> > diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c > index 4eba35a..7564c26 100644 > --- a/drivers/media/dvb/ttpci/av7110_ca.c > +++ b/drivers/media/dvb/ttpci/av7110_ca.c > @@ -25,7 +25,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/kernel.h> > diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c > index e162691..f1cbfe5 100644 > --- a/drivers/media/dvb/ttpci/av7110_hw.c > +++ b/drivers/media/dvb/ttpci/av7110_hw.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > /* for debugging ARM communication: */ > diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c > index 8986d96..ac20c5b 100644 > --- a/drivers/media/dvb/ttpci/av7110_v4l.c > +++ b/drivers/media/dvb/ttpci/av7110_v4l.c > @@ -22,7 +22,7 @@ > * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/kernel.h> > diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c > index 983672a..97afc01 100644 > --- a/drivers/media/dvb/ttpci/budget-av.c > +++ b/drivers/media/dvb/ttpci/budget-av.c > @@ -30,7 +30,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "budget.h" > diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c > index 13ac9e3..a9c2c32 100644 > --- a/drivers/media/dvb/ttpci/budget-ci.c > +++ b/drivers/media/dvb/ttpci/budget-ci.c > @@ -26,7 +26,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include <linux/module.h> > diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c > index ba18e56..0546613 100644 > --- a/drivers/media/dvb/ttpci/budget-core.c > +++ b/drivers/media/dvb/ttpci/budget-core.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > > diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c > index 9c92f9d..5798355 100644 > --- a/drivers/media/dvb/ttpci/budget-patch.c > +++ b/drivers/media/dvb/ttpci/budget-patch.c > @@ -27,7 +27,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "av7110.h" > diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c > index 874a10a..d238fb9 100644 > --- a/drivers/media/dvb/ttpci/budget.c > +++ b/drivers/media/dvb/ttpci/budget.c > @@ -31,7 +31,7 @@ > * Or, point your browser to http://www.gnu.org/copyleft/gpl.html > * > * > - * the project's page is at http://www.linuxtv.org/dvb/ > + * the project's page is at http://www.linuxtv.org/ > */ > > #include "budget.h" > diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c > index 4349213..255d40d 100644 > --- a/drivers/media/radio/radio-maxiradio.c > +++ b/drivers/media/radio/radio-maxiradio.c > @@ -13,7 +13,7 @@ > * anybody does please mail me. > * > * For the pdf file see: > - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 > + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf > * > * > * CHANGES: > diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c > index 0343928..a5363ed 100644 > --- a/drivers/media/radio/radio-typhoon.c > +++ b/drivers/media/radio/radio-typhoon.c > @@ -1,8 +1,6 @@ > /* Typhoon Radio Card driver for radio support > * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@xxxxxx> > * > - * Card manufacturer: > - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e > * > * Notes on the hardware > * > diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig > index f6e4d04..d000522 100644 > --- a/drivers/media/video/Kconfig > +++ b/drivers/media/video/Kconfig > @@ -978,7 +978,7 @@ config USB_STKWEBCAM > Supported devices are typically found in some Asus laptops, > with USB id 174f:a311 and 05e1:0501. Other Syntek cameras > may be supported by the stk11xx driver, from which this is > - derived, see http://stk11xx.sourceforge.net > + derived, see <http://sourceforge.net/projects/syntekdriver/> > > To compile this driver as a module, choose M here: the > module will be called stkwebcam. > diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c > index be35e69..9536f1a 100644 > --- a/drivers/media/video/cafe_ccic.c > +++ b/drivers/media/video/cafe_ccic.c > @@ -4,7 +4,7 @@ > * sensor. > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://www.marvell.com/products/pc_connectivity/88alp01/ > * > * Copyright 2006 One Laptop Per Child Association, Inc. > * Copyright 2006-7 Jonathan Corbet <corbet@xxxxxxx> > diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c > index 6b805af..fe10909 100644 > --- a/drivers/media/video/cx18/cx18-cards.c > +++ b/drivers/media/video/cx18/cx18-cards.c > @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { > .tv = { 0x61, 0x60, I2C_CLIENT_END }, > }; > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c > index abd64e8..53a6782 100644 > --- a/drivers/media/video/cx23885/cx23885-417.c > +++ b/drivers/media/video/cx23885/cx23885-417.c > @@ -7,7 +7,7 @@ > * (c) 2008 Steven Toth <stoth@xxxxxxxxxxx> > * - CX23885/7/8 support > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c > index e46e1ce..660b2a9 100644 > --- a/drivers/media/video/cx88/cx88-blackbird.c > +++ b/drivers/media/video/cx88/cx88-blackbird.c > @@ -9,7 +9,7 @@ > * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx> > * - video_ioctl2 conversion > * > - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), > + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c > index ca1fd32..87afbbe 100644 > --- a/drivers/media/video/ivtv/ivtv-cards.c > +++ b/drivers/media/video/ivtv/ivtv-cards.c > @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { > > /********************** card configuration *******************************/ > > -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii > +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ > This keeps the PCI ID database up to date. Note that the entries > must be added under vendor 0x4444 (Conexant) as subsystem IDs. > New vendor IDs should still be added to the vendor ID list. */ > diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c > index ef0c817..b1dbcf1 100644 > --- a/drivers/media/video/mxb.c > +++ b/drivers/media/video/mxb.c > @@ -3,7 +3,7 @@ > > Copyright (C) 1998-2006 Michael Hunold <michael@xxxxxxx> > > - Visit http://www.mihu.de/linux/saa7146/mxb/ > + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html > for further details about this card. > > This program is free software; you can redistribute it and/or modify > diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > index 2782f94..2e86fdc 100644 > --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c > @@ -4,7 +4,6 @@ > * * > * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * > * <medaglia@xxxxxxxxxxx> * > - * http://cadu.homelinux.com:8080/ * > * * > * Support for SN9C103, DAC Magnitude, exposure and green gain controls * > * added by Luca Risolia <luca.risolia@xxxxxxxxxxxxxxx> * > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig > index b743312..3b28933 100644 > --- a/drivers/misc/Kconfig > +++ b/drivers/misc/Kconfig > @@ -112,8 +112,8 @@ config IBM_ASM > > WARNING: This software may not be supported or function > correctly on your IBM server. Please consult the IBM ServerProven > - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for > - information on the specific driver level and support statement > + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> > + for information on the specific driver level and support statement > for your IBM server. > > config PHANTOM > diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c > index 3e6c47b..ba29d2f 100644 > --- a/drivers/mtd/chips/cfi_cmdset_0002.c > +++ b/drivers/mtd/chips/cfi_cmdset_0002.c > @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) > > /* > * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 > - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 > - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf > + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 > + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf > * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf > */ > if (extp->MajorVersion != '1' || > diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c > index f4359fe..caf6041 100644 > --- a/drivers/mtd/devices/lart.c > +++ b/drivers/mtd/devices/lart.c > @@ -17,7 +17,7 @@ > * - January 2000 > * > * [2] MTD internal API documentation > - * - http://www.linux-mtd.infradead.org/tech/ > + * - http://www.linux-mtd.infradead.org/ > * > * Limitations: > * > diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c > index 4d6a64c..037b399 100644 > --- a/drivers/mtd/ftl.c > +++ b/drivers/mtd/ftl.c > @@ -51,7 +51,7 @@ > > Use of the FTL format for non-PCMCIA applications may be an > infringement of these patents. For additional information, > - contact M-Systems (http://www.m-sys.com) directly. > + contact M-Systems directly. M-Systems since acquired by Sandisk. > > ======================================================================*/ > #include <linux/mtd/blktrans.h> > diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig > index 701d942..9622126 100644 > --- a/drivers/mtd/maps/Kconfig > +++ b/drivers/mtd/maps/Kconfig > @@ -172,7 +172,7 @@ config MTD_OCTAGON > This provides a 'mapping' driver which supports the way in which > the flash chips are connected in the Octagon-5066 Single Board > Computer. More information on the board is available at > - <http://www.octagonsystems.com/CPUpages/5066.html>. > + <http://www.octagonsystems.com/products/5066.aspx>. > > config MTD_VMAX > tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" > @@ -284,7 +284,7 @@ config MTD_TQM8XXL > chips, currently uses AMD one. This 'mapping' driver supports > that arrangement, allowing the CFI probe and command set driver > code to communicate with the chips on the TQM8xxL board. More at > - <http://www.denx.de/embedded-ppc-en.html>. > + <http://www.denx.de/wiki/PPCEmbedded/>. > > config MTD_RPXLITE > tristate "CFI Flash device mapped on RPX Lite or CLLF" > diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c > index db1dfc5..e06c898 100644 > --- a/drivers/mtd/nand/cafe_nand.c > +++ b/drivers/mtd/nand/cafe_nand.c > @@ -2,7 +2,7 @@ > * Driver for One Laptop Per Child âCAFÃâ controller, aka Marvell 88ALP01 > * > * The data sheet for this device can be found at: > - * http://www.marvell.com/products/pcconn/88ALP01.jsp > + * http://wiki.laptop.org/go/Datasheets > * > * Copyright  2006 Red Hat, Inc. > * Copyright  2006 David Woodhouse <dwmw2@xxxxxxxxxxxxx> > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 2cc81a5..5b66842 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -921,7 +921,7 @@ config SMC91X > including the SMC91C94 and the SMC91C111. Say Y if you want it > compiled into the kernel, and read the file > <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, > - available from <http://www.linuxdoc.org/docs.html#howto>. > + available from <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module ( = code which can be > inserted in and removed from the running kernel whenever you want). > @@ -1031,7 +1031,7 @@ config SMC911X > including the new LAN9115, LAN9116, LAN9117, and LAN9118. > Say Y if you want it compiled into the kernel, > and read the Ethernet-HOWTO, available from > - <http://www.linuxdoc.org/docs.html#howto>. > + <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module. The module will be > called smc911x. If you want to compile it as a module, say M > @@ -1513,7 +1513,7 @@ config E100 > > For the latest Intel PRO/100 network driver for Linux, see: > > - <http://appsr.intel.com/scripts-df/support_intel.asp> > + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> > > More specific information on configuring the driver is in > <file:Documentation/networking/e100.txt>. > @@ -1539,9 +1539,8 @@ config FEALNX > select CRC32 > select MII > help > - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet > - cards. Specifications and data at > - <http://www.myson.com.hk/mtd/datasheet/>. > + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet > + cards. <http://www.myson.com.tw/> > > config NATSEMI > tristate "National Semiconductor DP8381x series PCI Ethernet support" > @@ -1715,7 +1714,7 @@ config SMSC9420 > This is a driver for SMSC's LAN9420 PCI ethernet adapter. > Say Y if you want it compiled into the kernel, > and read the Ethernet-HOWTO, available from > - <http://www.linuxdoc.org/docs.html#howto>. > + <http://www.tldp.org/docs.html#howto>. > > This driver is also available as a module. The module will be > called smsc9420. If you want to compile it as a module, say M > @@ -2550,7 +2549,7 @@ config CHELSIO_T1 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > @@ -2582,7 +2581,7 @@ config CHELSIO_T3 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > @@ -2607,7 +2606,7 @@ config CHELSIO_T4 > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF > our website at <http://www.chelsio.com>. > > For customer support, please visit our customer support page at > - <http://www.chelsio.com/support.htm>. > + <http://www.chelsio.com/support.html>. > > Please send feedback to <linux-bugs@xxxxxxxxxxx>. > > diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig > index 0a0e0cd..f5a8916 100644 > --- a/drivers/net/appletalk/Kconfig > +++ b/drivers/net/appletalk/Kconfig > @@ -18,7 +18,7 @@ config ATALK > > General information about how to connect Linux, Windows machines and > Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The > - NET-3-HOWTO, available from > + NET3-4-HOWTO, available from > <http://www.tldp.org/docs.html#howto>, contains valuable > information as well. > > diff --git a/drivers/net/atp.c b/drivers/net/atp.c > index bd2f9d3..0eee044 100644 > --- a/drivers/net/atp.c > +++ b/drivers/net/atp.c > @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ > > In 1997 Realtek made available the documentation for the second generation > RTL8012 chip, which has lead to several driver improvements. > - http://www.realtek.com.tw/cn/cn.html > + http://www.realtek.com.tw/ > > Theory of Operation > > diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c > index 57c8ac0..c6e2571 100644 > --- a/drivers/net/epic100.c > +++ b/drivers/net/epic100.c > @@ -131,8 +131,8 @@ IIIa. Ring buffers > > IVb. References > > -http://www.smsc.com/main/tools/discontinued/83c171.pdf > -http://www.smsc.com/main/tools/discontinued/83c175.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf > +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf > http://scyld.com/expert/NWay.html > http://www.national.com/pf/DP/DP83840A.html > > diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig > index 62d5d5c..95dbcfd 100644 > --- a/drivers/net/hamradio/Kconfig > +++ b/drivers/net/hamradio/Kconfig > @@ -73,7 +73,7 @@ config DMASCC > certain parameters, such as channel access timing, clock mode, and > DMA channel. This is accomplished with a small utility program, > dmascc_cfg, available at > - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to > + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to > get at least version 1.27 of dmascc_cfg, as older versions will not > work with the current driver. > > diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c > index 294ccfb..8de3273 100644 > --- a/drivers/net/ibmlana.c > +++ b/drivers/net/ibmlana.c > @@ -23,7 +23,7 @@ paper sources: > 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 > Document Number SC30-3661-00' by IBM for info on the adapter itself > > - Also see http://www.natsemi.com/ > + Also see http://www.national.com/analog > > special acknowledgements to: > - Bob Eager for helping me out with documentation from IBM > diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h > index 36c3060..4dc39e5 100644 > --- a/drivers/net/irda/donauboe.h > +++ b/drivers/net/irda/donauboe.h > @@ -54,7 +54,7 @@ > /* anyone who has. HOWEVER the chip bears a striking resemblence */ > /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ > /* the documentation for this is freely available at */ > -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ > +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ > /* The mapping between the registers in that document and the */ > /* Registers in the 701 oboe chip are as follows */ > > diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c > index 56f3fc4..627b619 100644 > --- a/drivers/net/pci-skeleton.c > +++ b/drivers/net/pci-skeleton.c > @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer. > > IVb. References > > -http://www.realtek.com.tw/cn/cn.html > +http://www.realtek.com.tw/ > http://www.scyld.com/expert/NWay.html > > IVc. Errata > diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c > index c683f77..e092679 100644 > --- a/drivers/net/pcmcia/3c574_cs.c > +++ b/drivers/net/pcmcia/3c574_cs.c > @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. > V. References > > http://www.scyld.com/expert/NWay.html > -http://www.national.com/pf/DP/DP83840.html > +http://www.national.com/opf/DP/DP83840A.html > > Thanks to Terry Murphy of 3Com for providing development information for > earlier 3Com products. > diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c > index 8c4067a..12fb560 100644 > --- a/drivers/net/sc92031.c > +++ b/drivers/net/sc92031.c > @@ -15,7 +15,7 @@ > * Rewritten for 2.6 by Cesar Eduardo Barros > * > * A datasheet for this chip can be found at > - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf > + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf > */ > > /* Note about set_mac_address: I don't know how to change the hardware > diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c > index ccee3ed..ef000b2 100644 > --- a/drivers/net/tlan.c > +++ b/drivers/net/tlan.c > @@ -78,7 +78,7 @@ > * - Updated tlan.txt accordingly. > * - Adjusted minimum/maximum frame length. > * - There is now a TLAN website up at > - * http://tlan.kernel.dk > + * http://hp.sourceforge.net/ > * > * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now > * reports PHY information when used with Donald > diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c > index 435ef7d..ccc16d6 100644 > --- a/drivers/net/tokenring/tms380tr.c > +++ b/drivers/net/tokenring/tms380tr.c > @@ -5,7 +5,7 @@ > * Originally sktr.c: Written 1997 by Christoph Goos > * > * A fine result of the Linux Systems Network Architecture Project. > - * http://www.linux-sna.org > + * http://www.vanheusden.com/sna/ > * > * This software may be used and distributed according to the terms > * of the GNU General Public License, incorporated herein by reference. > diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig > index 516713f..14c02e1 100644 > --- a/drivers/net/tulip/Kconfig > +++ b/drivers/net/tulip/Kconfig > @@ -151,7 +151,7 @@ config ULI526X > select CRC32 > ---help--- > This driver is for ULi M5261/M5263 10/100M Ethernet Controller > - (<http://www.uli.com.tw/>). > + (<http://www.nvidia.com/page/uli_drivers.html>). > > To compile this driver as a module, choose M here. The module will > be called uli526x. > diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c > index 08555f8..08ad269 100644 > --- a/drivers/net/usb/plusb.c > +++ b/drivers/net/usb/plusb.c > @@ -32,7 +32,7 @@ > > > /* > - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com > + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ > * > * The protocol and handshaking used here should be bug-compatible > * with the Linux 2.2 "plusb" driver, by Deti Fliegl. > diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig > index d08ce6a..423eb26 100644 > --- a/drivers/net/wan/Kconfig > +++ b/drivers/net/wan/Kconfig > @@ -409,7 +409,7 @@ config CYCLADES_SYNC > tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" > depends on WAN_ROUTER_DRIVERS && (PCI || ISA) > ---help--- > - Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an > + Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an > intelligent multiprotocol WAN adapter with data transfer rates up to > 512 Kbps. These cards support the X.25 and SNA related protocols. > > diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h > index ea6362a..97659a0 100644 > --- a/drivers/net/wireless/ath/ath5k/ath5k.h > +++ b/drivers/net/wireless/ath/ath5k/ath5k.h > @@ -351,7 +351,7 @@ struct ath5k_srev_name { > /* > * Some of this information is based on Documentation from: > * > - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG > + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG > * > * Modulation for Atheros' eXtended Range - range enhancing extension that is > * supposed to double the distance an Atheros client device can keep a > diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h > index 55b4ac6..69a9b34 100644 > --- a/drivers/net/wireless/ath/ath5k/reg.h > +++ b/drivers/net/wireless/ath/ath5k/reg.h > @@ -26,7 +26,6 @@ > * Atheros presentations and papers like these: > * > * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf > - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf > * > * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf > * > diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig > index b0342a5..8e82379 100644 > --- a/drivers/net/wireless/p54/Kconfig > +++ b/drivers/net/wireless/p54/Kconfig > @@ -8,7 +8,7 @@ config P54_COMMON > also need to be enabled in order to support any devices. > > These devices require softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54common. > > @@ -20,7 +20,7 @@ config P54_USB > This driver is for USB isl38xx based wireless cards. > > These devices require softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54usb. > > @@ -34,7 +34,7 @@ config P54_PCI > supported by the fullmac driver/firmware. > > This driver requires softmac firmware which can be found at > - http://prism54.org/ > + <http://wireless.kernel.org/en/users/Drivers/p54> > > If you choose to build a module, it'll be called p54pci. > > diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c > index dc14420..b5e64d7 100644 > --- a/drivers/net/wireless/prism54/islpci_hotplug.c > +++ b/drivers/net/wireless/prism54/islpci_hotplug.c > @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); > /* In this order: vendor, device, subvendor, subdevice, class, class_mask, > * driver_data > * If you have an update for this please contact prism54-devel@xxxxxxxxxxx > - * The latest list can be found at http://prism54.org/supported_cards.php */ > + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ > static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { > /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ > { > diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino > index 097324f..1627426 100644 > --- a/drivers/parisc/README.dino > +++ b/drivers/parisc/README.dino > @@ -10,8 +10,7 @@ > ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are > ** not affected." > ** > -** REVISIT: "go/pci_defect" link below is stale. > -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> > +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443 > ** > ** Product First Good Serial Number > ** C200/C240 (US) US67350000 > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 89ed181..dcc333f 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir > * VIA Apollo KT133 needs PCI latency patch > * Made according to a windows driver based patch by George E. Breese > * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm > + * and http://www.georgebreese.com/net/software/#PCI > * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for > * the info on which Mr Breese based his work. > * > @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) > /* > * Common misconfiguration of the MediaGX/Geode PCI master that will > * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 > - * datasheets found at http://www.national.com/ds/GX for info on what > + * datasheets found at http://www.national.com/analog for info on what > * these bits do. <christer@xxxxxxxxxxx> > */ > static void quirk_mediagx_master(struct pci_dev *dev) > diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c > index 414d9a6..91a7225 100644 > --- a/drivers/pcmcia/yenta_socket.c > +++ b/drivers/pcmcia/yenta_socket.c > @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket) > * invisible during PCI scans because of a misconfigured subordinate number > * of the parent brige - some BIOSes seem to be too lazy to set it right. > * Does the fixup carefully by checking how far it can go without conflicts. > - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. > + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. > */ > static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) > { > diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c > index 2d8ac43..bc89f39 100644 > --- a/drivers/pnp/pnpbios/proc.c > +++ b/drivers/pnp/pnpbios/proc.c > @@ -11,7 +11,6 @@ > * > * The .../escd file is utilized by the lsescd utility written by > * Gunther Mayer. > - * http://home.t-online.de/home/gunther.mayer/lsescd > * > * The .../legacy_device_resources file is not used yet. > * > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index bbf91ae..03453d4 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -116,7 +116,7 @@ config CHR_DEV_OSST > <http://www.tldp.org/docs.html#howto> and > <file:Documentation/scsi/osst.txt> in the kernel source. > More info on the OnStream driver may be found on > - <http://linux1.onstream.nl/test/> > + <http://sourceforge.net/projects/osst/> > Please also have a look at the standard st docu, as most of it > applies to osst as well. > > @@ -156,9 +156,9 @@ config CHR_DEV_SG > directly, so you need some additional software which knows how to > talk to these devices using the SCSI protocol: > > - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD > + For scanners, look at SANE (<http://www.sane-project.org/>). For CD > writer software look at Cdrtools > - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) > + (<http://cdrecord.berlios.de/private/cdrecord.html>) > and for burning a "disk at once": CDRDAO > (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high > quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). > @@ -950,6 +950,7 @@ config SCSI_IPS > ---help--- > This is support for the IBM ServeRAID hardware RAID controllers. > See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> > + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> > for more information. If this driver does not work correctly > without modification please contact the author by email at > <ipslinux@xxxxxxxxxxx>. > @@ -1609,7 +1610,7 @@ config SCSI_DEBUG > host adapter with one dummy SCSI disk. Each dummy disk uses kernel > RAM as storage (i.e. it is a ramdisk). To save space when multiple > dummy disks are simulated, they share the same kernel RAM for > - their storage. See <http://www.torque.net/sg/sdebug.html> for more > + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more > information. This driver is primarily of use to those testing the > SCSI and block subsystems. If unsure, say N. > > diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c > index 24110f6..131c95f 100644 > --- a/drivers/serial/8250.c > +++ b/drivers/serial/8250.c > @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up) > /* > * Exar ST16C2550 "A2" devices incorrectly detect as > * having an EFR, and report an ID of 0x0201. See > - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf > + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html > */ > if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) > return 1; > diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c > index 5318dd3..feb62a8 100644 > --- a/drivers/serial/bfin_sport_uart.c > +++ b/drivers/serial/bfin_sport_uart.c > @@ -10,7 +10,7 @@ > > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf > * This application note describe how to implement a UART on a Sharc DSP, > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h > index 9ce253e..6d06ce1 100644 > --- a/drivers/serial/bfin_sport_uart.h > +++ b/drivers/serial/bfin_sport_uart.h > @@ -10,7 +10,7 @@ > > /* > * This driver and the hardware supported are in term of EE-191 of ADI. > - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf > + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf > * This application note describe how to implement a UART on a Sharc DSP, > * but this driver is implemented on Blackfin Processor. > * Transmit Frame Sync is not used by this driver to transfer data out. > diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c > index 9b03d7b..3fa2e16 100644 > --- a/drivers/serial/uartlite.c > +++ b/drivers/serial/uartlite.c > @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); > * Register definitions > * > * For register details see datasheet: > - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf > + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf > */ > > #define ULITE_RX 0x00 > diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README > index 96b9717..0d82a6d 100644 > --- a/drivers/staging/asus_oled/README > +++ b/drivers/staging/asus_oled/README > @@ -2,7 +2,7 @@ > Driver for Asus OLED display present in some Asus laptops. > > The code of this driver is based on 'asusoled' program taken from > - https://launchpad.net/asusoled/. I just wanted to have a simple > + <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple > kernel driver for controlling this device, but I didn't know how > to do that. Now I know ;) Also, that program can not be used > with usbhid loaded, which means no USB mouse/keyboard while > diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c > index 5b279fb..8c95d8c 100644 > --- a/drivers/staging/asus_oled/asus_oled.c > +++ b/drivers/staging/asus_oled/asus_oled.c > @@ -24,7 +24,7 @@ > * > * > * Asus OLED support is based on asusoled program taken from > - * https://launchpad.net/asusoled/. > + * <http://lapsus.berlios.de/asus_oled.html>. > * > * > */ > diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c > index ced346a..78b1410 100644 > --- a/drivers/staging/comedi/drivers/cb_pcimdas.c > +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c > @@ -37,7 +37,7 @@ Configuration Options: > Developed from cb_pcidas and skel by Richard Bytheway (mocelet@xxxxxxxx). > Only supports DIO, AO and simple AI in it's present form. > No interrupts, multi channel or FIFO AI, although the card looks like it could support this. > -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. > +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. > */ > > #include "../comedidev.h" > diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c > index 6af6c83..82be77d 100644 > --- a/drivers/staging/comedi/drivers/daqboard2000.c > +++ b/drivers/staging/comedi/drivers/daqboard2000.c > @@ -50,8 +50,8 @@ Configuration options: > With some help from our swedish distributor, we got the Windows sourcecode > for the card, and here are the findings so far. > > - 1. A good document that describes the PCI interface chip is found at: > - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf > + 1. A good document that describes the PCI interface chip is 9080db-106.pdf > + available from http://www.plxtech.com/products/io/pci9080 > > 2. The initialization done so far is: > a. program the FPGA (windows code sans a lot of error messages) > diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c > index 3acf7e6..1411dd8 100644 > --- a/drivers/staging/comedi/drivers/ni_labpc.c > +++ b/drivers/staging/comedi/drivers/ni_labpc.c > @@ -37,7 +37,7 @@ boards has not > yet been added to the driver, mainly due to the fact that > I don't know the device id numbers. If you have one > of these boards, > -please file a bug report at https://bugs.comedi.org/ > +please file a bug report at http://comedi.org/ > so I can get the necessary information from you. > > The 1200 series boards have onboard calibration dacs for correcting > diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c > index bd16f91..986ef67 100644 > --- a/drivers/staging/comedi/drivers/ni_mio_common.c > +++ b/drivers/staging/comedi/drivers/ni_mio_common.c > @@ -34,7 +34,7 @@ > 340747b.pdf AT-MIO E series Register Level Programmer Manual > 341079b.pdf PCI E Series RLPM > 340934b.pdf DAQ-STC reference manual > - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) > + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/) > release_ni611x.pdf > release_ni67xx.pdf > Other possibly relevant info: > diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h > index 485d63f..0d254a1 100644 > --- a/drivers/staging/comedi/drivers/plx9080.h > +++ b/drivers/staging/comedi/drivers/plx9080.h > @@ -13,7 +13,7 @@ > * > ******************************************************************** > * > - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ > + * Copyright (C) 1999 RG Studio s.c. > * Written by Krzysztof Halasa <khc@xxxxxxxxxxxxxxx> > * > * Portions (C) SBE Inc., used by permission. > diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c > index 0367d2b..a49a7c5 100644 > --- a/drivers/staging/comedi/drivers/rtd520.c > +++ b/drivers/staging/comedi/drivers/rtd520.c > @@ -59,7 +59,7 @@ Configuration options: > Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf > Example source: http://www.rtdusa.com/examples/dm/dm7520.zip > Call them and ask for the register level manual. > - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm > + PCI chip: http://www.plxtech.com/products/io/pci9080 > > Notes: > This board is memory mapped. There is some IO stuff, but it isn't needed. > diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c > index 6612247..ba8f670 100644 > --- a/drivers/staging/quickstart/quickstart.c > +++ b/drivers/staging/quickstart/quickstart.c > @@ -5,8 +5,7 @@ > * Copyright (C) 2007-2010 Angelo Arrifano <miknix@xxxxxxxxx> > * > * Information gathered from disassebled dsdt and from here: > - * "http://download.microsoft.com/download/9/c/5/ > - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" > + * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> > * > * This program is free software; you can redistribute it and/or modify > * it under the terms of the GNU General Public License as published by > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig > index 1da73ec..bb44079 100644 > --- a/drivers/uio/Kconfig > +++ b/drivers/uio/Kconfig > @@ -17,9 +17,9 @@ config UIO_CIF > depends on PCI > help > Driver for Hilscher CIF DeviceNet and Profibus cards. This > - driver requires a userspace component that handles all of the > - heavy lifting and can be found at: > - http://www.osadl.org/projects/downloads/UIO/user/cif-* > + driver requires a userspace component called cif that handles > + all of the heavy lifting and can be found at: > + <http://www.osadl.org/projects/downloads/UIO/user/> > > To compile this driver as a module, choose M here: the module > will be called uio_cif. > diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig > index 916b2b6..b71e309 100644 > --- a/drivers/usb/serial/Kconfig > +++ b/drivers/usb/serial/Kconfig > @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR > help > Say Y here if you want to connect to your HandSpring Visor, Palm > m500 or m505 through its USB docking station. See > - <http://usbvisor.sourceforge.net/> for more information on using this > + <http://usbvisor.sourceforge.net/index.php3> for more information on using this > driver. > > To compile this driver as a module, choose M here: the > @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN > and was developed with their support. You must also include > firmware to support your particular device(s). > > - See <http://misc.nu/hugh/keyspan.html> for more information. > + See <http://blemings.org/hugh/keyspan.html> for more information. > > To compile this driver as a module, choose M here: the > module will be called keyspan. > diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h > index 15a4583..28c640d 100644 > --- a/drivers/usb/serial/ftdi_sio_ids.h > +++ b/drivers/usb/serial/ftdi_sio_ids.h > @@ -46,7 +46,7 @@ > #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ > > /* OOCDlink by Joern Kaipf <joernk@xxxxxx> > - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ > + * (http://www.joernonline.de/) */ > #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ > > /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ > @@ -335,7 +335,7 @@ > #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ > > /* ACT Solutions HomePro ZWave interface > - (http://www.act-solutions.com/HomePro.htm) */ > + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ > #define FTDI_ACTZWAVE_PID 0xF2D0 > > /* > @@ -366,7 +366,7 @@ > #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ > > /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ > -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ > +/* http://www.usbuirt.com/ */ > #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ > > /* CCS Inc. ICDU/ICDU40 product ID - > @@ -395,7 +395,7 @@ > */ > #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ > > -/* Inside Accesso contactless reader (http://www.insidefr.com) */ > +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ > #define INSIDE_ACCESSO 0xFAD0 > > /* > @@ -634,14 +634,14 @@ > > /* > * JETI SPECTROMETER SPECBOS 1201 > - * http://www.jeti.com/products/sys/scb/scb1201.php > + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 > */ > #define JETI_VID 0x0c6c > #define JETI_SPC1201_PID 0x04b2 > > /* > * FTDI USB UART chips used in construction projects from the > - * Elektor Electronics magazine (http://elektor-electronics.co.uk) > + * Elektor Electronics magazine (http://www.elektor.com/) > */ > #define ELEKTOR_VID 0x0C7D > #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ > diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c > index 297163c..0791778 100644 > --- a/drivers/usb/serial/keyspan.c > +++ b/drivers/usb/serial/keyspan.c > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h > index bf3297d..2d8baf6 100644 > --- a/drivers/usb/serial/keyspan.h > +++ b/drivers/usb/serial/keyspan.h > @@ -9,7 +9,7 @@ > the Free Software Foundation; either version 2 of the License, or > (at your option) any later version. > > - See http://misc.nu/hugh/keyspan.html for more information. > + See http://blemings.org/hugh/keyspan.html for more information. > > Code in this driver inspired by and in a number of places taken > from Brian Warner's original Keyspan-PDA driver. > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h > index 3a3f5e6..d325bb8 100644 > --- a/drivers/usb/serial/mct_u232.h > +++ b/drivers/usb/serial/mct_u232.h > @@ -10,10 +10,9 @@ > * > * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. > * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin > - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further > - * information. The properties of this device are listed at the end of this > - * file. This device is available from various distributors. I know Hana, > - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. > + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html > + * for further information. The properties of this device are listed at the end > + * of this file. This device was used in the Dlink DSB-S25. > * > * All of the information about the device was acquired by using SniffUSB > * on Windows98. The technical details of the reverse engineering are > @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, > * embedded UART. Exhaustive documentation for these is available at: > * > * http://www.semiconductors.philips.com/pip/p87c52ubaa > - * http://www.semiconductors.philips.com/pip/pdiusbd12 > + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf > * > * Thanks to Julian Highfield for the pointer to the Philips database. > * > diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig > index 8a372ba..b356e15 100644 > --- a/drivers/usb/storage/Kconfig > +++ b/drivers/usb/storage/Kconfig > @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB > depends on USB_STORAGE > help > Support for certain Datafab CompactFlash readers. > - Datafab has a web page at <http://www.datafabusa.com/>. > + Datafab has a web page at <http://www.datafab.com/>. > > If this driver is compiled as a module, it will be named ums-datafab. > > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig > index 8b31fdf..dc06ff1 100644 > --- a/drivers/video/Kconfig > +++ b/drivers/video/Kconfig > @@ -49,7 +49,7 @@ menuconfig FB > You need an utility program called fbset to make full use of frame > buffer devices. Please read <file:Documentation/fb/framebuffer.txt> > and the Framebuffer-HOWTO at > - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more > + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more > information. > > Say Y here and to the driver for your graphics board below if you > @@ -955,7 +955,7 @@ config FB_EPSON1355 > Build in support for the SED1355 Epson Research Embedded RAMDAC > LCD/CRT Controller (since redesignated as the S1D13505) as a > framebuffer. Product specs at > - <http://www.erd.epson.com/vdc/html/products.htm>. > + <http://vdc.epson.com/>. > > config FB_S1D13XXX > tristate "Epson S1D13XXX framebuffer support" > @@ -966,7 +966,7 @@ config FB_S1D13XXX > help > Support for S1D13XXX framebuffer device family (currently only > working with S1D13806). Product specs at > - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> > + <http://vdc.epson.com/> > > config FB_ATMEL > tristate "AT91/AT32 LCD Controller support" > @@ -1323,7 +1323,7 @@ config FB_RADEON > don't need to choose this to run the Radeon in plain VGA mode. > > There is a product page at > - http://apps.ati.com/ATIcompare/ > + http://products.amd.com/en-us/GraphicCardResult.aspx > > config FB_RADEON_I2C > bool "DDC/I2C for ATI Radeon support" > @@ -1395,7 +1395,7 @@ config FB_ATY_CT > Say Y here to support use of ATI's 64-bit Rage boards (or other > boards based on the Mach64 CT, VT, GT, and LT chipsets) as a > framebuffer device. The ATI product support page for these boards > - is at <http://support.ati.com/products/pc/mach64/>. > + is at <http://support.ati.com/products/pc/mach64/mach64.html>. > > config FB_ATY_GENERIC_LCD > bool "Mach64 generic LCD support (EXPERIMENTAL)" > diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c > index f3d7440..3ec4923 100644 > --- a/drivers/video/arcfb.c > +++ b/drivers/video/arcfb.c > @@ -2,7 +2,6 @@ > * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board > * > * Copyright (C) 2005, Jaya Kumar <jayalk@xxxxxxxxxxxx> > - * http://www.intworks.biz/arclcd > * > * This file is subject to the terms and conditions of the GNU General Public > * License. See the file COPYING in the main directory of this archive for > diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c > index db9713b..a268cbf 100644 > --- a/drivers/video/epson1355fb.c > +++ b/drivers/video/epson1355fb.c > @@ -4,7 +4,7 @@ > * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller > * (previously known as SED1355) > * > - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html > + * Cf. http://vdc.epson.com/ > * > * > * Copyright (C) Hewlett-Packard Company. All rights reserved. > diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c > index 7293eac..7cb715d 100644 > --- a/drivers/video/fbcvt.c > +++ b/drivers/video/fbcvt.c > @@ -5,7 +5,7 @@ > * > * Based from the VESA(TM) Coordinated Video Timing Generator by > * Graham Loveridge April 9, 2003 available at > - * http://www.vesa.org/public/CVT/CVTd6r1.xls > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls > * > * This file is subject to the terms and conditions of the GNU General Public > * License. See the file COPYING in the main directory of this archive > diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c > index c77bcc6..e225c00 100644 > --- a/drivers/video/hecubafb.c > +++ b/drivers/video/hecubafb.c > @@ -10,7 +10,7 @@ > * > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. > * This work was possible because of apollo display code from E-Ink's website > - * http://support.eink.com/community > + * http://eink.com/ > * All information used to write this code is from public material made > * available by E-Ink on its support site. Some commands such as 0xA4 > * were found by looping through cmd=0x00 thru 0xFF and supplying random > diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c > index 9b3d6e4..63ed3b7 100644 > --- a/drivers/video/metronomefb.c > +++ b/drivers/video/metronomefb.c > @@ -10,7 +10,7 @@ > * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. > * > * This work was made possible by help and equipment support from E-Ink > - * Corporation. http://support.eink.com/community > + * Corporation. http://www.eink.com/ > * > * This driver is written to be used with the Metronome display controller. > * It is intended to be architecture independent. A board specific driver > diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S > index 418fe69..f3acc19 100644 > --- a/firmware/keyspan_pda/keyspan_pda.S > +++ b/firmware/keyspan_pda/keyspan_pda.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> > + * EzUSB Technical Reference Manual: <http://www.cypress.com/> > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports > * use totally different registers! > diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S > index 05d99dd..0b79bbf 100644 > --- a/firmware/keyspan_pda/xircom_pgs.S > +++ b/firmware/keyspan_pda/xircom_pgs.S > @@ -74,7 +74,7 @@ > * recognizes the new device ID and glues it to the real serial driver code. > * > * USEFUL DOCS: > - * EzUSB Technical Reference Manual: <http://www.anchorchips.com> > + * EzUSB Technical Reference Manual: <http://www.cypress.com/> > * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is > * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports > * use totally different registers! > diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h > index 6bbd75c..7c232c1 100644 > --- a/fs/hostfs/hostfs.h > +++ b/fs/hostfs/hostfs.h > @@ -28,12 +28,7 @@ > * #define ATTR_KILL_SUID 2048 > * #define ATTR_KILL_SGID 4096 > * > - * and this is because they were added in 2.5 development in this patch: > - * > - * http://linux.bkbits.net:8080/linux-2.5/ > - * cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html > - * |src/.|src/include|src/include/linux|related/include/linux/fs.h > - * > + * and this is because they were added in 2.5 development. > * Actually, they are not needed by most ->setattr() methods - they are set by > * callers of notify_change() to notify that the setuid/setgid bits must be > * dropped. > diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c > index 5bf8a04..789c625 100644 > --- a/fs/partitions/ldm.c > +++ b/fs/partitions/ldm.c > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@xxxxxxxxx> > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads > * > * This program is free software; you can redistribute it and/or modify it under > * the terms of the GNU General Public License as published by the Free Software > diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h > index d1fb50b..374242c 100644 > --- a/fs/partitions/ldm.h > +++ b/fs/partitions/ldm.h > @@ -5,7 +5,7 @@ > * Copyright (c) 2001-2007 Anton Altaparmakov > * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@xxxxxxxxx> > * > - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ > + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads > * > * This program is free software; you can redistribute it and/or modify it > * under the terms of the GNU General Public License as published by the Free > diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig > index 513f431..7cd4666 100644 > --- a/fs/reiserfs/Kconfig > +++ b/fs/reiserfs/Kconfig > @@ -10,7 +10,8 @@ config REISERFS_FS > > In general, ReiserFS is as fast as ext2, but is very efficient with > large directories and small files. Additional patches are needed > - for NFS and quotas, please see <http://www.namesys.com/> for links. > + for NFS and quotas, please see > + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links. > > It is more easily extended to have features currently found in > database and keyword search systems than block allocation based file > @@ -18,7 +19,8 @@ config REISERFS_FS > plugins consistent with our motto ``It takes more than a license to > make source code open.'' > > - Read <http://www.namesys.com/> to learn more about reiserfs. > + Read <https://reiser4.wiki.kernel.org/index.php/Main_Page> > + to learn more about reiserfs. > > Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. > > diff --git a/fs/reiserfs/README b/fs/reiserfs/README > index 14e8c9d..e2f7a26 100644 > --- a/fs/reiserfs/README > +++ b/fs/reiserfs/README > @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.) > [END LICENSING] > > Reiserfs is a file system based on balanced tree algorithms, which is > -described at http://devlinux.com/namesys. > +described at https://reiser4.wiki.kernel.org/index.php/Main_Page > > Stop reading here. Go there, then return. > > diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h > index 4086b8e..da2530e 100644 > --- a/include/crypto/gf128mul.h > +++ b/include/crypto/gf128mul.h > @@ -54,8 +54,8 @@ > > /* Comment by Rik: > * > - * For some background on GF(2^128) see for example: http://- > - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf > + * For some background on GF(2^128) see for example: > + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf > * > * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can > * be mapped to computer memory in a variety of ways. Let's examine > diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h > index c2eeb63..61ce641 100644 > --- a/include/linux/fdreg.h > +++ b/include/linux/fdreg.h > @@ -89,7 +89,7 @@ > /* the following commands are new in the 82078. They are not used in the > * floppy driver, except the first three. These commands may be useful for apps > * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at > - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */ > + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ > > #define FD_PARTID 0x18 /* part id ("extended" version cmd) */ > #define FD_SAVE 0x2e /* save fdc regs for later restore */ > diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h > index 3e659ec..7d95847 100644 > --- a/include/linux/if_infiniband.h > +++ b/include/linux/if_infiniband.h > @@ -5,7 +5,7 @@ > * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD > * license, available in the LICENSE.TXT file accompanying this > * software. These details are also available at > - * <http://openib.org/license.html>. > + * <http://www.openfabrics.org/software_license.htm>. > * > * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF > diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h > index de24af7..54b8e0d 100644 > --- a/include/linux/n_r3964.h > +++ b/include/linux/n_r3964.h > @@ -4,7 +4,6 @@ > * Copyright by > * Philips Automation Projects > * Kassel (Germany) > - * http://www.pap-philips.de > * ----------------------------------------------------------- > * This software may be used and distributed according to the terms of > * the GNU General Public License, incorporated herein by reference. > diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig > index 2a72aa9..705e53e 100644 > --- a/net/ax25/Kconfig > +++ b/net/ax25/Kconfig > @@ -7,7 +7,7 @@ menuconfig HAMRADIO > bool "Amateur Radio support" > help > If you want to connect your Linux box to an amateur radio, answer Y > - here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> > + here. You want to read <http://www.tapr.org/> > and more specifically about AX.25 on Linux > <http://www.linux-ax25.org/>. > > @@ -42,7 +42,7 @@ config AX25 > check out the file <file:Documentation/networking/ax25.txt> in the > kernel source. More information about digital amateur radio in > general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called ax25. > @@ -89,7 +89,7 @@ config NETROM > <http://www.linux-ax25.org>. You also might want to check out the > file <file:Documentation/networking/ax25.txt>. More information about > digital amateur radio in general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called netrom. > @@ -108,7 +108,7 @@ config ROSE > <http://www.linux-ax25.org>. You also might want to check out the > file <file:Documentation/networking/ax25.txt>. More information about > digital amateur radio in general is on the WWW at > - <http://www.tapr.org/tapr/html/pkthome.html>. > + <http://www.tapr.org/>. > > To compile this driver as a module, choose M here: the > module will be called rose. > diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig > index 571f895..4123d5b 100644 > --- a/net/ipv4/Kconfig > +++ b/net/ipv4/Kconfig > @@ -84,7 +84,7 @@ config IP_FIB_TRIE > > An experimental study of compression methods for dynamic tries > Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + <http://www.csc.kth.se/~snilsson/software/dyntrie2/> > > endchoice > > @@ -555,7 +555,7 @@ config TCP_CONG_VENO > distinguishing to circumvent the difficult judgment of the packet loss > type. TCP Veno cuts down less congestion window in response to random > loss packets. > - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + See <http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186> > > config TCP_CONG_YEAH > tristate "YeAH TCP" > diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c > index 3a92a76..094e150 100644 > --- a/net/ipv4/cipso_ipv4.c > +++ b/net/ipv4/cipso_ipv4.c > @@ -9,7 +9,7 @@ > * > * The CIPSO draft specification can be found in the kernel's Documentation > * directory as well as the following URL: > - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt > + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt > * The FIPS-188 specification can be found at the following URL: > * http://www.itl.nist.gov/fipspubs/fip188.htm > * > diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c > index 4a8e370..d9818c5 100644 > --- a/net/ipv4/fib_trie.c > +++ b/net/ipv4/fib_trie.c > @@ -16,7 +16,7 @@ > * > * An experimental study of compression methods for dynamic tries > * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002. > - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/ > + * http://www.csc.kth.se/~snilsson/software/dyntrie2/ > * > * > * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson > diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig > index 1833bdb..d048275 100644 > --- a/net/ipv4/netfilter/Kconfig > +++ b/net/ipv4/netfilter/Kconfig > @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG > which can only be viewed through syslog. > > The appropriate userspace logging daemon (ulogd) may be obtained from > - <http://www.gnumonks.org/projects/ulogd/> > + <http://www.netfilter.org/projects/ulogd/index.html> > > To compile it as a module, choose M here. If unsure, say N. > > diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c > index 1eba160..00ca688 100644 > --- a/net/ipv4/tcp_illinois.c > +++ b/net/ipv4/tcp_illinois.c > @@ -6,7 +6,7 @@ > * The algorithm is described in: > * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm > * for High-Speed Networks" > - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf > + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf > * > * Implemented from description in paper and ns-2 simulation. > * Copyright (C) 2007 Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx> > diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c > index e663b78..bccce34 100644 > --- a/net/ipv4/tcp_input.c > +++ b/net/ipv4/tcp_input.c > @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss); > * > * The algorithm for RTT estimation w/o timestamps is based on > * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL. > - * <http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps> > + * <http://public.lanl.gov/radiant/pubs.html#DRS> > * > * More detail on this code can be found at > - * <http://www.psc.edu/~jheffner/senior_thesis.ps>, > + * <http://staff.psc.edu/jheffner/>, > * though this reference is out of date. A new paper > * is pending. > */ > diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c > index b612acf..38bc0b5 100644 > --- a/net/ipv4/tcp_veno.c > +++ b/net/ipv4/tcp_veno.c > @@ -6,7 +6,7 @@ > * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks." > * IEEE Journal on Selected Areas in Communication, > * Feb. 2003. > - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf > + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf > */ > > #include <linux/mm.h> > diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c > index c4c885d..3fb2b73 100644 > --- a/net/netfilter/nf_conntrack_proto_tcp.c > +++ b/net/netfilter/nf_conntrack_proto_tcp.c > @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) > /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering > in IP Filter' by Guido van Rooij. > > - http://www.nluug.nl/events/sane2000/papers.html > - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz > + http://www.sane.nl/events/sane2000/papers.html > + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/ > > The boundaries and the conditions are changed according to RFC793: > the packet must intersect the window (i.e. segments may be > diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c > index 456a1b4..854c303 100644 > --- a/sound/oss/ac97_codec.c > +++ b/sound/oss/ac97_codec.c > @@ -21,11 +21,8 @@ > * > ************************************************************************** > * > - * The Intel Audio Codec '97 specification is available at the Intel > - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/ > - * > - * The specification itself is currently available at: > - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf > + * The Intel Audio Codec '97 specification is available at: > + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf > * > ************************************************************************** > * > diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c > index c7fba53..537cfba 100644 > --- a/sound/pci/ens1370.c > +++ b/sound/pci/ens1370.c > @@ -22,7 +22,7 @@ > /* Power-Management-Code ( CONFIG_PM ) > * for ens1371 only ( FIXME ) > * derived from cs4281.c, atiixp.c and via82xx.c > - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm > + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/ > * by Kurt J. Bosch > */ > > diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c > index 4677492..400f9eb 100644 > --- a/sound/pci/intel8x0.c > +++ b/sound/pci/intel8x0.c > @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich > * Intel 82443MX running a 100MHz processor system bus has a hardware bug, > * which aborts PCI busmaster for audio transfer. A workaround is to set > * the pages as non-cached. For details, see the errata in > - * http://www.intel.com/design/chipsets/specupdt/245051.htm > + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf > */ > static void fill_nocache(void *buf, int size, int nocache) > { >
