Re: Possible regression when going from 2.6.26 to 2.6.32

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On 10/31/2010 12:20 AM, Wolfgang Karall wrote:
One thing I forgot to mention in the intial mail is that what I think the
problem might be is that the disks spin up one after the other in this
NAS box (both when powering on, but also at reboots there is a audible
delay), and the old version 2.6.26 waited long enough while the newer
versions don't. At least that's what I gather from the "retrying in
5 secs" lines.

Finally got around to testing this out further (on both version 2.6.32 and 2.6.36), and this is indeed a timing issue. Adding a simple "sleep" to my initramfs setup (as init-top script) led to the drives all being recognized properly again, see the attached dmesg outputs.

Glad this can be worked around in userland at least.

Cheers
Wolfgang
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-orion5x (Debian 2.6.32-13) (maks@xxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 Sat May 22 02:17:44 UTC 2010
[    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: QNAP TS-409
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c038d010, node_mem_map c03f7000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram rw initrd=0x800000,0x3fffff
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 251520KB available (3244K code, 568K data, 120K init, 0K highmem)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:64
[    0.000000] Console: colour dummy device 80x30
[    0.000194] Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
[    0.250134] Security Framework initialized
[    0.250169] SELinux:  Disabled at boot.
[    0.250214] Mount-cache hash table entries: 512
[    0.250850] Initializing cgroup subsys ns
[    0.250876] Initializing cgroup subsys cpuacct
[    0.250896] Initializing cgroup subsys devices
[    0.250916] Initializing cgroup subsys freezer
[    0.250935] Initializing cgroup subsys net_cls
[    0.251020] CPU: Testing write buffer coherency: ok
[    0.252891] devtmpfs: initialized
[    0.255332] regulator: core version 0.5
[    0.255716] NET: Registered protocol family 16
[    0.256560] Orion ID: MV88F5281-D0. TCLK=166666667.
[    0.256590] Orion: Applying 5281 D0 WFI workaround.
[    0.305041] pci 0000:00:00.0: reg 10 64bit mmio pref: [0xf1000000-0xf10fffff]
[    0.305076] pci 0000:00:00.0: reg 18 32bit mmio: [0x000000-0x1fffffff]
[    0.305210] pci 0000:00:01.0: reg 10 64bit mmio: [0x40000000-0x400fffff]
[    0.305244] pci 0000:00:01.0: reg 18 io port: [0xf0000000-0xf00000ff]
[    0.305381] PCI: bus0: Fast back to back transfers disabled
[    0.305966] pci 0000:01:00.0: reg 10 64bit mmio pref: [0x000000-0xfffffff]
[    0.306003] pci 0000:01:00.0: reg 18 64bit mmio pref: [0x10000000-0x1fffffff]
[    0.306039] pci 0000:01:00.0: reg 20 64bit mmio: [0xf1000000-0xf10fffff]
[    0.306071] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe0000000-0xe7ffffff]
[    0.306124] pci 0000:01:00.0: supports D1 D2
[    0.306145] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[    0.306169] pci 0000:01:00.0: PME# disabled
[    0.306266] PCI: bus1: Fast back to back transfers enabled
[    0.309444] bio: create slab <bio-0> at 0
[    0.310150] vgaarb: loaded
[    0.311250] Switching to clocksource orion_clocksource
[    0.320212] NET: Registered protocol family 2
[    0.320643] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.322100] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.322512] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.322723] TCP: Hash tables configured (established 8192 bind 8192)
[    0.322745] TCP reno registered
[    0.323156] NET: Registered protocol family 1
[    0.323567] Unpacking initramfs...
[    0.928742] Freeing initrd memory: 4092K
[    0.928889] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.929488] audit: initializing netlink socket (disabled)
[    0.929557] type=2000 audit(0.920:1): initialized
[    0.943267] VFS: Disk quotas dquot_6.5.2
[    0.943800] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.944040] msgmni has been set to 499
[    0.945457] alg: No test for stdrng (krng)
[    0.945733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.945761] io scheduler noop registered
[    0.945779] io scheduler anticipatory registered
[    0.945798] io scheduler deadline registered
[    0.946275] io scheduler cfq registered (default)
[    0.958746] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.959698] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[    1.320053] console [ttyS0] enabled
[    1.324125] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
[    1.331690] physmap platform flash device: 00800000 at ff800000
[    1.337834] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
[    1.344356]  Intel/Sharp Extended Query Table at 0x0031
[    1.349581]  Intel/Sharp Extended Query Table at 0x0031
[    1.354839] Using buffer write method
[    1.358491] cfi_cmdset_0001: Erase suspend on write enabled
[    1.364082] erase region 0: offset=0x0,size=0x20000,blocks=64
[    1.401960] RedBoot partition parsing not available
[    1.406833] Using physmap partition information
[    1.411407] Creating 6 MTD partitions on "physmap-flash.0":
[    1.416978] 0x000000780000-0x000000800000 : "U-Boot"
[    1.423133] 0x000000000000-0x000000200000 : "Kernel"
[    1.429085] 0x000000200000-0x000000600000 : "RootFS1"
[    1.435201] 0x000000600000-0x000000700000 : "RootFS2"
[    1.441266] 0x000000760000-0x000000780000 : "U-Boot Config"
[    1.447895] 0x000000700000-0x000000760000 : "NAS Config"
[    1.455013] mice: PS/2 mouse device common for all mice
[    1.461007] i2c /dev entries driver
[    1.467591] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[    1.474849] Registered led device: ts409:red:sata1
[    1.479740] Registered led device: ts409:red:sata2
[    1.484683] Registered led device: ts409:red:sata3
[    1.489603] Registered led device: ts409:red:sata4
[    1.496518] TCP cubic registered
[    1.499750] NET: Registered protocol family 17
[    1.504253] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    1.512574] registered taskstats version 1
[    1.517737] rtc-s35390a 0-0030: setting system clock to 2010-11-30 10:32:04 UTC (1291113124)
[    1.526200] Initalizing network drop monitor service
[    1.531337] Freeing init memory: 120K
[   62.035876] SCSI subsystem initialized
[   62.231761] libata version 3.00 loaded.
[   62.274034] sata_mv 0000:00:01.0: version 1.28
[   62.279217] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[   62.290191] scsi0 : sata_mv
[   62.293684] scsi1 : sata_mv
[   62.296923] scsi2 : sata_mv
[   62.300136] scsi3 : sata_mv
[   62.303287] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
[   62.310935] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
[   62.318622] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
[   62.326287] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
[   62.841366] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   62.861874] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   62.867877] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   62.891962] ata1.00: configured for UDMA/133
[   62.896837] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   63.411365] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   63.431872] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   63.437875] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   63.461961] ata2.00: configured for UDMA/133
[   63.466798] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   63.981367] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   64.001874] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   64.007874] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   64.031963] ata3.00: configured for UDMA/133
[   64.036809] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   64.551366] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   64.571871] ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   64.577871] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   64.601961] ata4.00: configured for UDMA/133
[   64.606807] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   65.705636] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   65.720999] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   65.732499] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   65.743061] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   65.806934] sd 0:0:0:0: [sda] Write Protect is off
[   65.811838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   65.821152] sd 1:0:0:0: [sdb] Write Protect is off
[   65.826031] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   65.832413] sd 2:0:0:0: [sdc] Write Protect is off
[   65.837203] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   65.841373] sd 3:0:0:0: [sdd] Write Protect is off
[   65.846163] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   65.877820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.894536] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.909414] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.923613] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   66.027646]  sda:
[   66.036703]  sdb:
[   66.041915]  sdc:
[   66.051095]  sdd: sda1 sda2 sda3 sda4
[   66.074164]  sdb1 sdb2 sdb3 sdb4
[   66.096354]  sdc1 sdc2 sdc3 sdc4
[   66.115566]  sdd1 sdd2 sdd3 sdd4
[   66.121374] sd 0:0:0:0: [sda] Attached SCSI disk
[   66.148464] sd 1:0:0:0: [sdb] Attached SCSI disk
[   66.155141] sd 2:0:0:0: [sdc] Attached SCSI disk
[   66.163244] sd 3:0:0:0: [sdd] Attached SCSI disk
[   67.974112] md: raid1 personality registered for level 1
[   68.018135] async_tx: api initialized (async)
[   68.045216] xor: measuring software checksum speed
[   68.091311]    arm4regs  :   429.200 MB/sec
[   68.141303]    8regs     :   377.200 MB/sec
[   68.191309]    32regs    :   416.800 MB/sec
[   68.195488] xor: using function: arm4regs (429.200 MB/sec)
[   68.393450] raid6: int32x1     24 MB/s
[   68.561996] raid6: int32x2     35 MB/s
[   68.732225] raid6: int32x4     47 MB/s
[   68.902008] raid6: int32x8     42 MB/s
[   68.905754] raid6: using algorithm int32x4 (47 MB/s)
[   68.993845] md: raid6 personality registered for level 6
[   68.999153] md: raid5 personality registered for level 5
[   69.004532] md: raid4 personality registered for level 4
[   69.099243] md: md0 stopped.
[   69.212518] md: bind<sdb1>
[   69.215732] md: bind<sda1>
[   69.242851] raid1: raid set md0 active with 2 out of 2 mirrors
[   69.248879] md0: detected capacity change from 0 to 1998585856
[   69.265686] md: md1 stopped.
[   69.288292]  md0: unknown partition table
[   69.393272] md: bind<sdd1>
[   69.399996] md: bind<sdc1>
[   69.436289] raid1: raid set md1 active with 2 out of 2 mirrors
[   69.442407] md1: detected capacity change from 0 to 1998585856
[   69.458921] md: md2 stopped.
[   69.478996]  md1: unknown partition table
[   69.585764] md: bind<sdb2>
[   69.588992] md: bind<sdc2>
[   69.604215] md: bind<sdd2>
[   69.607450] md: bind<sda2>
[   69.639308] raid5: device sda2 operational as raid disk 0
[   69.644767] raid5: device sdd2 operational as raid disk 3
[   69.650162] raid5: device sdc2 operational as raid disk 2
[   69.655580] raid5: device sdb2 operational as raid disk 1
[   69.666185] raid5: allocated 4228kB for md2
[   69.674384] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.679352] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.684372] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.689331] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.694315] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
[   69.701977] RAID5 conf printout:
[   69.705204]  --- rd:4 wd:4
[   69.707914]  disk 0, o:1, dev:sda2
[   69.711332]  disk 1, o:1, dev:sdb2
[   69.714729]  disk 2, o:1, dev:sdc2
[   69.718124]  disk 3, o:1, dev:sdd2
[   69.721835] md2: detected capacity change from 0 to 1499994390528
[   69.738680] md: md3 stopped.
[   69.758987]  md2: unknown partition table
[   69.862784] md: bind<sdb3>
[   69.867489] md: bind<sdc3>
[   69.870710] md: bind<sdd3>
[   69.881774] md: bind<sda3>
[   69.921166] raid5: device sda3 operational as raid disk 0
[   69.926628] raid5: device sdd3 operational as raid disk 3
[   69.932043] raid5: device sdc3 operational as raid disk 2
[   69.937433] raid5: device sdb3 operational as raid disk 1
[   69.945899] raid5: allocated 4228kB for md3
[   69.950265] 0: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.955337] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.960300] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.965290] 1: w=4 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[   69.970251] raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
[   69.977906] RAID5 conf printout:
[   69.981131]  --- rd:4 wd:4
[   69.983866]  disk 0, o:1, dev:sda3
[   69.987260]  disk 1, o:1, dev:sdb3
[   69.990656]  disk 2, o:1, dev:sdc3
[   69.994078]  disk 3, o:1, dev:sdd3
[   69.997781] md3: detected capacity change from 0 to 1499994390528
[   70.007221]  md3: unknown partition table
[   70.409194] device-mapper: uevent: version 1.0.3
[   70.422194] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[   70.914203] kjournald starting.  Commit interval 5 seconds
[   70.971869] EXT3 FS on md0, internal journal
[   70.976158] EXT3-fs: mounted filesystem with ordered data mode.
[   75.099472] NET: Registered protocol family 10
[   75.106784] lo: Disabled Privacy Extensions
[   75.580935] udevd version 125 started
[   86.695017] usbcore: registered new interface driver usbfs
[   86.731673] usbcore: registered new interface driver hub
[   86.749677] usbcore: registered new device driver usb
[   86.831543] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   86.894874] MV-643xx 10/100/1000 ethernet driver version 1.4
[   86.940006] mv643xx_eth smi: probed
[   86.977144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   88.238912] net eth0: port 0 with MAC address 00:00:00:00:51:81
[   88.245962] orion-ehci orion-ehci.0: Marvell Orion EHCI
[   88.259151] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   88.341481] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[   88.361428] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   88.367439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   88.374305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   88.381536] usb usb1: Product: Marvell Orion EHCI
[   88.386235] usb usb1: Manufacturer: Linux 2.6.32-5-orion5x ehci_hcd
[   88.392515] usb usb1: SerialNumber: orion-ehci.0
[   88.451396] usb usb1: configuration #1 chosen from 1 choice
[   88.458247] hub 1-0:1.0: USB hub found
[   88.465210] hub 1-0:1.0: 1 port detected
[   88.781377] usb 1-1: new high speed USB device using orion-ehci and address 2
[   88.953118] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[   88.959814] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   88.966973] usb 1-1: Product: USB2.0 Hub
[   89.004396] usb 1-1: configuration #1 chosen from 1 choice
[   89.032689] hub 1-1:1.0: USB hub found
[   89.043026] hub 1-1:1.0: 4 ports detected
[   89.351844] usb 1-1.2: new full speed USB device using orion-ehci and address 3
[   89.591876] usb 1-1.2: New USB device found, idVendor=04f9, idProduct=000e
[   89.598742] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   89.606066] usb 1-1.2: Product: HL-1450 series
[   89.610505] usb 1-1.2: Manufacturer: Brother
[   89.614844] usb 1-1.2: SerialNumber: K2J988892
[   89.664354] usb 1-1.2: configuration #1 chosen from 1 choice
[   90.407483] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000E
[   90.428045] usbcore: registered new interface driver usblp
[   92.562926] Adding 1951736k swap on /dev/md1.  Priority:-1 extents:1 across:1951736k 
[   94.418638] loop: module loaded
[   97.001733] device-mapper: table: 253:1: adding target device (start sect 2761900032 len 1533067264) caused an alignment inconsistency
[   99.650159] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  103.026683] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[  103.033526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  109.633141] RPC: Registered udp transport module.
[  109.637843] RPC: Registered tcp transport module.
[  109.642612] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  110.054952] Slow work thread pool: Starting up
[  110.068060] Slow work thread pool: Ready
[  110.075148] FS-Cache: Loaded
[  110.317080] FS-Cache: Netfs 'nfs' registered for caching
[  110.752180] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[  147.459237] IPv6 over IPv4 tunneling driver
[  147.477454] sit0: Disabled Privacy Extensions
[  147.862277] tun: Universal TUN/TAP device driver, 1.6
[  147.867568] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[  149.117726] sixxs: Disabled Privacy Extensions
[  156.760012] svc: failed to register lockdv1 RPC service (errno 97).
[  156.778894] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[  156.800946] NFSD: starting 90-second grace period
[  166.228219] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[  256.339700] kjournald starting.  Commit interval 5 seconds
[  256.392440] EXT3 FS on dm-1, internal journal
[  256.396814] EXT3-fs: mounted filesystem with ordered data mode.
[  260.260653] kjournald starting.  Commit interval 5 seconds
[  260.349405] EXT3 FS on dm-0, internal journal
[  260.354704] EXT3-fs: mounted filesystem with ordered data mode.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.36-trunk-orion5x (Debian 2.6.36-1~experimental.1) (max@xxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Sat Oct 30 14:21:25 UTC 2010
[    0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: QNAP TS-409
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Clearing invalid memory bank 0KB@0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x41000403
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[    0.000000] free_area_init_node: node 0, pgdat c03b18d4, node_mem_map c041b000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram rw initrd=0x800000,0x3fffff
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 251600k/251600k available, 10544k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xfd800000   ( 720 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0029000   ( 132 kB)
[    0.000000]       .text : 0xc0029000 - 0xc036f000   (3352 kB)
[    0.000000]       .data : 0xc038a000 - 0xc03b5ba0   ( 175 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:64
[    0.000000] Console: colour dummy device 80x30
[    0.000206] Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
[    0.250060] pid_max: default: 32768 minimum: 301
[    0.250173] Security Framework initialized
[    0.250207] SELinux:  Disabled at boot.
[    0.250270] Mount-cache hash table entries: 512
[    0.250890] Initializing cgroup subsys ns
[    0.250921] Initializing cgroup subsys cpuacct
[    0.250944] Initializing cgroup subsys devices
[    0.250966] Initializing cgroup subsys freezer
[    0.250988] Initializing cgroup subsys net_cls
[    0.251008] Initializing cgroup subsys blkio
[    0.251146] CPU: Testing write buffer coherency: ok
[    0.253268] devtmpfs: initialized
[    0.255098] regulator: core version 0.5
[    0.255418] NET: Registered protocol family 16
[    0.256460] Orion ID: MV88F5281-D0. TCLK=166666667.
[    0.256493] Orion: Applying 5281 D0 WFI workaround.
[    0.318434] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[    0.318473] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x1fffffff]
[    0.318610] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x400fffff 64bit]
[    0.318650] pci 0000:00:01.0: reg 18: [io  0xf0000000-0xf00000ff]
[    0.318805] PCI: bus0: Fast back to back transfers disabled
[    0.319480] pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref]
[    0.319527] pci 0000:01:00.0: reg 18: [mem 0x10000000-0x1fffffff 64bit pref]
[    0.319569] pci 0000:01:00.0: reg 20: [mem 0xf1000000-0xf10fffff 64bit]
[    0.319607] pci 0000:01:00.0: reg 30: [mem 0xe0000000-0xe7ffffff pref]
[    0.319664] pci 0000:01:00.0: supports D1 D2
[    0.319691] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[    0.319718] pci 0000:01:00.0: PME# disabled
[    0.319824] PCI: bus1: Fast back to back transfers enabled
[    0.320154] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[    0.320205] pci 0000:00:01.0: BAR 0: set to [mem 0xe0000000-0xe00fffff 64bit] (PCI address [0xe0000000-0xe00fffff]
[    0.320248] pci 0000:00:01.0: BAR 2: assigned [io  0x1000-0x10ff]
[    0.320288] pci 0000:00:01.0: BAR 2: set to [io  0x1000-0x10ff] (PCI address [0x1000-0x10ff]
[    0.323657] bio: create slab <bio-0> at 0
[    0.324412] vgaarb: loaded
[    0.325881] Switching to clocksource orion_clocksource
[    0.347331] NET: Registered protocol family 2
[    0.347629] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.348642] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.349071] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.349284] TCP: Hash tables configured (established 8192 bind 8192)
[    0.349308] TCP reno registered
[    0.349337] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.349390] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.349765] NET: Registered protocol family 1
[    0.349872] PCI: CLS 32 bytes, default 32
[    0.350149] Unpacking initramfs...
[    1.059366] Freeing initrd memory: 4092K
[    1.059533] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.060195] audit: initializing netlink socket (disabled)
[    1.060272] type=2000 audit(1.050:1): initialized
[    1.076405] VFS: Disk quotas dquot_6.5.2
[    1.076895] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.077126] msgmni has been set to 499
[    1.078513] alg: No test for stdrng (krng)
[    1.079141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.079177] io scheduler noop registered
[    1.079198] io scheduler deadline registered
[    1.079314] io scheduler cfq registered (default)
[    1.080016] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.101040] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
[    1.566234] console [ttyS0] enabled
[    1.590419] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A
[    1.598324] physmap platform flash device: 00800000 at ff800000
[    1.604490] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x000089 Chip ID 0x000017
[    1.614730] Intel/Sharp Extended Query Table at 0x0031
[    1.619903] Intel/Sharp Extended Query Table at 0x0031
[    1.625043] Using buffer write method
[    1.628721] cfi_cmdset_0001: Erase suspend on write enabled
[    1.634327] erase region 0: offset=0x0,size=0x20000,blocks=64
[    1.676708] RedBoot partition parsing not available
[    1.681582] Using physmap partition information
[    1.686170] Creating 6 MTD partitions on "physmap-flash.0":
[    1.691813] 0x000000780000-0x000000800000 : "U-Boot"
[    1.698518] 0x000000000000-0x000000200000 : "Kernel"
[    1.705123] 0x000000200000-0x000000600000 : "RootFS1"
[    1.711921] 0x000000600000-0x000000700000 : "RootFS2"
[    1.718749] 0x000000760000-0x000000780000 : "U-Boot Config"
[    1.726046] 0x000000700000-0x000000760000 : "NAS Config"
[    1.733761] mice: PS/2 mouse device common for all mice
[    1.739652] i2c /dev entries driver
[    1.746410] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[    1.753662] Registered led device: ts409:red:sata1
[    1.753810] Registered led device: ts409:red:sata2
[    1.753985] Registered led device: ts409:red:sata3
[    1.754132] Registered led device: ts409:red:sata4
[    1.755770] TCP cubic registered
[    1.759057] NET: Registered protocol family 17
[    1.763524] Registering the dns_resolver key type
[    1.768294] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    1.776746] registered taskstats version 1
[    1.781905] rtc-s35390a 0-0030: setting system clock to 2010-11-30 17:19:55 UTC (1291137595)
[    1.790365] Initalizing network drop monitor service
[    1.795665] Freeing init memory: 132K
[   17.342596] SCSI subsystem initialized
[   17.551813] libata version 3.00 loaded.
[   17.596693] sata_mv 0000:00:01.0: version 1.28
[   17.602005] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[   17.612999] scsi0 : sata_mv
[   17.616503] scsi1 : sata_mv
[   17.619887] scsi2 : sata_mv
[   17.623183] scsi3 : sata_mv
[   17.626321] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 11
[   17.634024] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 11
[   17.641709] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 11
[   17.649388] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 11
[   18.167103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   18.187494] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   18.193497] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   18.217462] ata1.00: configured for UDMA/133
[   18.222375] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   18.736496] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   18.756852] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   18.762855] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   18.806416] ata2.00: configured for UDMA/133
[   18.811336] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   19.326152] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   19.366126] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   19.372131] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   19.416125] ata3.00: configured for UDMA/133
[   19.421040] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   22.456011] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   22.476487] ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[   22.482496] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   22.506507] ata4.00: configured for UDMA/133
[   22.511409] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ: 0 ANSI: 5
[   22.699640] udevd (100): /proc/100/oom_adj is deprecated, please use /proc/100/oom_score_adj instead.
[   23.554886] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   23.616726] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   23.626824] sd 0:0:0:0: [sda] Write Protect is off
[   23.631628] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.632491] sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   23.641099] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[   23.686688] sd 1:0:0:0: [sdb] Write Protect is off
[   23.691522] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   23.692347] sd 3:0:0:0: [sdd] Write Protect is off
[   23.697223] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[   23.698512] sd 2:0:0:0: [sdc] Write Protect is off
[   23.703315] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   23.703685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.741940] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.751387] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.762744] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.992120]  sdb: sdb1 sdb2 sdb3 sdb4
[   24.036260] sd 1:0:0:0: [sdb] Attached SCSI disk
[   24.124030]  sda: sda1 sda2 sda3 sda4
[   24.149148]  sdd: sdd1 sdd2 sdd3 sdd4
[   24.171174] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.176191]  sdc: sdc1 sdc2 sdc3 sdc4
[   24.197231] sd 3:0:0:0: [sdd] Attached SCSI disk
[   24.215795] sd 2:0:0:0: [sdc] Attached SCSI disk
[   27.251383] md: raid1 personality registered for level 1
[   27.297611] async_tx: api initialized (async)
[   27.321454] xor: measuring software checksum speed
[   27.375956]    arm4regs  :   429.200 MB/sec
[   27.425952]    8regs     :   377.200 MB/sec
[   27.475950]    32regs    :   416.800 MB/sec
[   27.480136] xor: using function: arm4regs (429.200 MB/sec)
[   27.686274] raid6: int32x1     23 MB/s
[   27.856971] raid6: int32x2     35 MB/s
[   28.026641] raid6: int32x4     46 MB/s
[   28.197061] raid6: int32x8     42 MB/s
[   28.200812] raid6: using algorithm int32x4 (46 MB/s)
[   28.300638] md: raid6 personality registered for level 6
[   28.306004] md: raid5 personality registered for level 5
[   28.311309] md: raid4 personality registered for level 4
[   28.401323] md: md0 stopped.
[   28.491804] md: bind<sdb1>
[   28.495093] md: bind<sda1>
[   28.522205] md/raid1:md0: active with 2 out of 2 mirrors
[   28.527812] md0: detected capacity change from 0 to 1998585856
[   28.543644] md: md1 stopped.
[   28.575068]  md0: unknown partition table
[   28.671778] md: bind<sdd1>
[   28.677205] md: bind<sdc1>
[   28.714039] md/raid1:md1: active with 2 out of 2 mirrors
[   28.719663] md1: detected capacity change from 0 to 1998585856
[   28.735273] md: md2 stopped.
[   28.766815]  md1: unknown partition table
[   28.862342] md: bind<sdb2>
[   28.866419] md: bind<sdc2>
[   28.876446] md: bind<sdd2>
[   28.879749] md: bind<sda2>
[   28.920509] md/raid:md2: device sda2 operational as raid disk 0
[   28.926508] md/raid:md2: device sdd2 operational as raid disk 3
[   28.932428] md/raid:md2: device sdc2 operational as raid disk 2
[   28.938378] md/raid:md2: device sdb2 operational as raid disk 1
[   28.949376] md/raid:md2: allocated 4228kB
[   28.957095] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
[   28.964568] RAID conf printout:
[   28.964589]  --- level:5 rd:4 wd:4
[   28.964614]  disk 0, o:1, dev:sda2
[   28.964638]  disk 1, o:1, dev:sdb2
[   28.964662]  disk 2, o:1, dev:sdc2
[   28.964686]  disk 3, o:1, dev:sdd2
[   28.965019] md2: detected capacity change from 0 to 1499994390528
[   28.980984] md: md3 stopped.
[   29.013397]  md2: unknown partition table
[   29.090468] md: bind<sdb3>
[   29.099660] md: bind<sdc3>
[   29.106238] md: bind<sdd3>
[   29.116226] md: bind<sda3>
[   29.160723] md/raid:md3: device sda3 operational as raid disk 0
[   29.166711] md/raid:md3: device sdd3 operational as raid disk 3
[   29.172629] md/raid:md3: device sdc3 operational as raid disk 2
[   29.178577] md/raid:md3: device sdb3 operational as raid disk 1
[   29.187241] md/raid:md3: allocated 4228kB
[   29.191440] md/raid:md3: raid level 5 active with 4 out of 4 devices, algorithm 2
[   29.199029] RAID conf printout:
[   29.199053]  --- level:5 rd:4 wd:4
[   29.199078]  disk 0, o:1, dev:sda3
[   29.199103]  disk 1, o:1, dev:sdb3
[   29.199127]  disk 2, o:1, dev:sdc3
[   29.199151]  disk 3, o:1, dev:sdd3
[   29.199494] md3: detected capacity change from 0 to 1499994390528
[   29.213593]  md3: unknown partition table
[   29.739696] device-mapper: uevent: version 1.0.3
[   29.758284] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx
[   30.250718] EXT3-fs: barriers not enabled
[   30.269549] kjournald starting.  Commit interval 5 seconds
[   30.316579] EXT3-fs (md0): using internal journal
[   30.321309] EXT3-fs (md0): mounted filesystem with ordered data mode
[   34.649017] NET: Registered protocol family 10
[   34.655640] lo: Disabled Privacy Extensions
[   35.134951] udevd version 125 started
[   46.972185] usbcore: registered new interface driver usbfs
[   47.023994] usbcore: registered new interface driver hub
[   47.049097] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   47.057043] usbcore: registered new device driver usb
[   47.143905] MV-643xx 10/100/1000 ethernet driver version 1.4
[   47.167917] mv643xx_eth smi: probed
[   47.231214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   48.681953] net eth0: port 0 with MAC address 00:00:00:00:51:81
[   48.688126] orion-ehci orion-ehci.0: Marvell Orion EHCI
[   48.693479] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   48.776135] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
[   48.796098] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[   48.802125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   48.808971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   48.816225] usb usb1: Product: Marvell Orion EHCI
[   48.820927] usb usb1: Manufacturer: Linux 2.6.36-trunk-orion5x ehci_hcd
[   48.827556] usb usb1: SerialNumber: orion-ehci.0
[   48.852373] hub 1-0:1.0: USB hub found
[   48.856240] hub 1-0:1.0: 1 port detected
[   49.176042] usb 1-1: new high speed USB device using orion-ehci and address 2
[   49.347780] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[   49.354480] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   49.361642] usb 1-1: Product: USB2.0 Hub
[   49.401864] hub 1-1:1.0: USB hub found
[   49.426076] hub 1-1:1.0: 4 ports detected
[   49.736464] usb 1-1.2: new full speed USB device using orion-ehci and address 3
[   50.113397] usb 1-1.2: New USB device found, idVendor=04f9, idProduct=000e
[   50.120358] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   50.127688] usb 1-1.2: Product: HL-1450 series
[   50.132125] usb 1-1.2: Manufacturer: Brother
[   50.136421] usb 1-1.2: SerialNumber: K2J988892
[   50.180041] usbcore: registered new interface driver usbserial
[   50.225526] USB Serial support registered for generic
[   50.272536] usbcore: registered new interface driver usbserial_generic
[   50.279115] usbserial: USB Serial Driver core
[   50.486245] USB Serial support registered for GSM modem (1-port)
[   50.522099] usbcore: registered new interface driver option
[   50.527754] option: v0.7.2:USB Driver for GSM modems
[   51.339791] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x000E
[   51.363000] usbcore: registered new interface driver usblp
[   52.682877] Adding 1951740k swap on /dev/md1.  Priority:-1 extents:1 across:1951740k 
[   54.579033] loop: module loaded
[   57.184931] device-mapper: table: 253:1: adding target device (start sect 2761900032 len 1533067264) caused an alignment inconsistency
[   59.824027] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   63.028868] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[   63.035743] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   71.601099] RPC: Registered udp transport module.
[   71.605806] RPC: Registered tcp transport module.
[   71.610712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   72.043341] FS-Cache: Loaded
[   72.298830] FS-Cache: Netfs 'nfs' registered for caching
[   72.759725] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[  100.778616] IPv6 over IPv4 tunneling driver
[  100.796920] sit0: Disabled Privacy Extensions
[  101.227206] tun: Universal TUN/TAP device driver, 1.6
[  101.232253] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[  102.587931] sixxs: Disabled Privacy Extensions
[  110.296626] svc: failed to register lockdv1 RPC service (errno 97).
[  110.304355] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[  110.317207] NFSD: starting 90-second grace period

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux