On Sun, 6 Jul 2008, Justin Piszcz wrote:
On Sun, 6 Jul 2008, Justin Piszcz wrote:
On Sat, 5 Jul 2008, Justin Piszcz wrote:
On Sat, 5 Jul 2008, Robert Hancock wrote:
After the rebuild is completed I will perform more testing.
The following setup is in-place:
Kernel: 2.6.25.10
Boot options: none
NCQ: disabled on all disks
irqbalance: disabled/not running
Removal of all old test data:
$ for i in [0-9]*; do rm -rf $i & done
..
[468] 5158
[469] 5159
[470] 5160
[471] 5161
[472] 5162
$
-- no problems yet --
run untar test+copy test:
$ mkdir `seq 0 20`
$ ./runtest.sh
for i in `seq 0 20`
do
cd $i
tar xf ../linux-2.6.25.10.tar &
cd ..
done
for b in `seq 21 40`
do
cp linux-2.6.25.10.tar $b &
done
-- waiting for problems --
If no problems at the end of this test, will start up IRQ balance (how I
normally ran my system) and re-test to see it is relegated to the irqbalance
daemon running.
-----------------------------
Success ..
$ du -sh `seq 0 40`
311M 0
311M 1
311M 2
311M 3
311M 4
311M 5
311M 6
311M 7
311M 8
311M 9
311M 10
311M 11
311M 12
311M 13
311M 14
311M 15
311M 16
311M 17
311M 18
311M 19
311M 20
272M 21
272M 22
272M 23
272M 24
272M 25
272M 26
272M 27
272M 28
272M 29
272M 30
272M 31
272M 32
272M 33
272M 34
272M 35
272M 36
272M 37
272M 38
272M 39
272M 40
-----------------------------
.. no problems ..
.. proceeded with test mentioned above ..
Second round:
The following setup is in-place:
Kernel: 2.6.25.10
Boot options: none
NCQ: disabled on all disks
irqbalance: enabled
--
Remove old cruft:
$ for i in `seq 0 40`
do
rm -rf $i &
done
Create new directories, re-run test:
$ mkdir `seq 0 20`
$ ./runtest.sh
.. no problems either ..
--
I do not have a method to reproduce the problem at will unfortunately.
Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html