Add missing ATA_CMD_* defines to <linux/ata.h>. Also add
ATA_EXABYTE_ENABLE_NEST, SETFEATURES_AAM_* and ATA_SMART_*
defines while at it.
Partially based on earlier work by Chris Wedgwood.
Cc: Chris Wedgwood <cw@xxxxxxxx>
Cc: Jeff Garzik <jeff@xxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
include/linux/ata.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
Index: b/include/linux/ata.h
===================================================================
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -222,6 +222,13 @@ enum {
ATA_CMD_PMP_WRITE = 0xE8,
ATA_CMD_CONF_OVERLAY = 0xB1,
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SMART = 0xB0,
+ ATA_CMD_MEDIA_LOCK = 0xDE,
+ ATA_CMD_MEDIA_UNLOCK = 0xDF,
+ /* marked obsolete in the ATA/ATAPI-7 spec */
+ ATA_CMD_RESTORE = 0x10,
+ /* EXABYTE specific */
+ ATA_EXABYTE_ENABLE_NEST = 0xF0,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
@@ -262,6 +269,10 @@ enum {
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
+ /* Enable/Disable Automatic Acoustic Management */
+ SETFEATURES_AAM_ON = 0x42,
+ SETFEATURES_AAM_OFF = 0xC2,
+
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
@@ -284,6 +295,15 @@ enum {
ATA_DCO_IDENTIFY = 0xC2,
ATA_DCO_SET = 0xC3,
+ /* feature values for SMART */
+ ATA_SMART_ENABLE = 0xD8,
+ ATA_SMART_READ_VALUES = 0xD0,
+ ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+ /* password used in LBA Mid / LBA High for executing SMART commands */
+ ATA_SMART_LBAM_PASS = 0x4F,
+ ATA_SMART_LBAH_PASS = 0xC2,
+
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
