The libata-sff change is longer than I'd like for 2.6.26-rc, but it's
all printk changes/additions. No behavior changes, just improved
diagnostics upon error, something we really need in that area.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 9 +++------
drivers/ata/libata-sff.c | 30 +++++++++++++++++++++---------
drivers/ata/sata_mv.c | 2 +-
drivers/ata/sata_sil24.c | 1 +
drivers/ata/sata_uli.c | 1 +
5 files changed, 27 insertions(+), 16 deletions(-)
Mark Lord (1):
sata_mv: safer logic for limit_warnings
Tejun Heo (4):
sata_uli: hardreset is broken
sata_sil24: add DID for another adaptec flavor
ahci: always clear all bits in irq_stat
libata-sff: improve HSM violation reporting
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a4a2a2..061817a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
void __iomem *mmio;
- u32 irq_stat, irq_ack = 0;
+ u32 irq_stat;
VPRINTK("ENTER\n");
@@ -1809,14 +1809,11 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
"interrupt on disabled port %u\n", i);
}
- irq_ack |= (1 << i);
- }
-
- if (irq_ack) {
- writel(irq_ack, mmio + HOST_IRQ_STAT);
handled = 1;
}
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 215d186..c0908c2 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq)
{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags = 0;
int poll_next;
@@ -1125,9 +1126,12 @@ fsm_start:
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this */
+ ata_ehi_push_desc(ehi,
+ "ST_FIRST: !(DRQ|ERR|DF)");
qc->err_mask |= AC_ERR_HSM;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1146,9 +1150,9 @@ fsm_start:
* the CDB.
*/
if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
+ ata_ehi_push_desc(ehi, "ST_FIRST: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1205,9 +1209,9 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
+ ata_ehi_push_desc(ehi, "ST-ATAPI: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1226,13 +1230,17 @@ fsm_start:
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.
*/
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1257,8 +1265,12 @@ fsm_start:
status = ata_wait_idle(ap);
}
- if (status & (ATA_BUSY | ATA_DRQ))
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "BUSY|DRQ persists on ERR|DF, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
+ }
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 28092bc..ad169ff 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1607,7 +1607,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
* Much of the time, this could just work regardless.
* So for now, just log the incident, and allow the attempt.
*/
- if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
--limit_warnings;
ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
": attempting PIO w/multiple DRQ: "
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 8ee6b5b..84ffcc2 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -370,6 +370,7 @@ static const struct pci_device_id sil24_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
+ { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f277cea..db529b8 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -83,6 +83,7 @@ static struct ata_port_operations uli_ops = {
.inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
+ .hardreset = ATA_OP_NULL,
};
static const struct ata_port_info uli_port_info = {
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
