Hello,
ATA_16 through SG is supported with recent firmware for LSI cards.
I verified non-dma/pio ATA commands only.
Regards,
Krzysztof Blaszkowski
On Monday 23 June 2008 21:40, Moore, Eric wrote:
> On Monday, June 23, 2008 10:00 AM, Krzysztof Błaszkowski wrote:
> > I found that any HDIO_DRIVE_CMD ioctl on sata drive connected
> > through mpsas
> > and backplane will fail. Basically the scsi_host_template structure is
> > missing ioctl callback. after adding it and temporary
> > tweaking domain_device
> > structure associated to scsi_device (rphy only) i reached a
> > point where
> > ata_scsi_ioctl returns EIO and this why i need some clue on a
> > way of adding
> > such support similar way to aic94 where it has been done.
> >
> > I found also that mptsas leaves domain_device rather
> > uninitialized. the
> > example is rphy but there more fields i don't know if they
> > are revelant to
> > proper processing of HDIO_DRIVE_CMD.
> > i need additional references on libata design, call flow and
> > structures
> > relationship.
> >
> > probably it would be the best to design mptsas from scratch
> > using libsas but
> > this seems to me as huge work although if i was guided i
> > would probably
> > complete this.
>
> We have no plans to implement HDIO ioctls in our driver. The SATL
> implementation is inside the mpt fusion firmware, and from the driver, we
> don't care whether the underlying protocal is SAS, SATA, Fibre Channel, or
> SPI. For all protocals, we send scsi commands to the controller firmware
> using SCSI_IO opcode, with the following struct:
>
> typedef struct _MSG_SCSI_IO_REQUEST
> {
> U8 TargetID; /* 00h */
> U8 Bus; /* 01h */
> U8 ChainOffset; /* 02h */
> U8 Function; /* 03h */
> U8 CDBLength; /* 04h */
> U8 SenseBufferLength; /* 05h */
> U8 Reserved; /* 06h */
> U8 MsgFlags; /* 07h */
> U32 MsgContext; /* 08h */
> U8 LUN[8]; /* 0Ch */
> U32 Control; /* 14h */
> U8 CDB[16]; /* 18h */
> U32 DataLength; /* 28h */
> U32 SenseBufferLowAddr; /* 2Ch */
> SGE_IO_UNION SGL; /* 30h */
> } MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
> SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
>
> > I tried another approach where i used SG_IO ioctl and
> > prepared ATA_16 cdb
> > (just like libata does) but this failed on mptsas connected drives too
> > altough this way works on drives connected to ICH6.
>
> The SG tools will work with mpt fusion if your passing the ATA_12
> (opcode=0xA1) and ATA_16 (opcode=0x85). This is implemented in fusion
> firmware. If your failing, then your probably having old firmware. I
> suggest that you upgrading by going to the download site located here:
> http://www.lsi.com/cm/DownloadSearch.do?locale=EN. Ken Stewart is from
> support, he should be able to assist you with upgrading the firmware if you
> encounter any problems.
>
> Eric Moore
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
