Move ide_find_port() call to pmac_ide_setup_device(). While at it: - fix return value (s/-ENODEV/-ENOENT/) - add DRV_NAME define and use it to set name field of pmac_port_info - use ide_find_port_slot() instead of ide_find_port() - remove superfluous error message (ide_find_port_slot() takes care of it) - drop IDE interface number from driver banner message (but include bus type) v2: * Build fix (thanks to Stephen Rothwell for noticing the issue). Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Cc: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- replacement patch drivers/ide/ppc/pmac.c | 42 ++++++++++++++++-------------------------- 1 file changed, 16 insertions(+), 26 deletions(-) Index: b/drivers/ide/ppc/pmac.c =================================================================== --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -48,6 +48,8 @@ #include <asm/mediabay.h> #endif +#define DRV_NAME "ide-pmac" + #undef IDE_PMAC_DEBUG #define DMA_WAIT_TIMEOUT 50 @@ -982,6 +984,7 @@ static const struct ide_port_ops pmac_id static const struct ide_dma_ops pmac_dma_ops; static const struct ide_port_info pmac_port_info = { + .name = DRV_NAME, .init_dma = pmac_ide_init_dma, .chipset = ide_pmac, #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC @@ -1000,11 +1003,11 @@ static const struct ide_port_info pmac_p * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). */ -static int __devinit -pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) +static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) { struct device_node *np = pmif->node; const int *bidp; + ide_hwif_t *hwif; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; @@ -1073,16 +1076,21 @@ pmac_ide_setup_device(pmac_ide_hwif_t *p msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); } + printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + pmif->mediabay ? " (mediabay)" : "", hw->irq); + + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + return -ENOENT; + /* Setup MMIO ops */ default_hwif_mmiops(hwif); hwif->OUTBSYNC = pmac_outbsync; ide_init_port_hw(hwif, hw); - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", - hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hwif->irq); - idx[0] = hwif->index; ide_device_add(idx, &d); @@ -1112,7 +1120,6 @@ pmac_ide_macio_attach(struct macio_dev * { void __iomem *base; unsigned long regbase; - ide_hwif_t *hwif; pmac_ide_hwif_t *pmif; int irq, rc; hw_regs_t hw; @@ -1121,14 +1128,6 @@ pmac_ide_macio_attach(struct macio_dev * if (pmif == NULL) return -ENOMEM; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n"); - printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name); - rc = -ENODEV; - goto out_free_pmif; - } - if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no address for %s\n", mdev->ofdev.node->full_name); @@ -1183,7 +1182,7 @@ pmac_ide_macio_attach(struct macio_dev * hw.dev = &mdev->bus->pdev->dev; hw.parent = &mdev->ofdev.dev; - rc = pmac_ide_setup_device(pmif, hwif, &hw); + rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ dev_set_drvdata(&mdev->ofdev.dev, NULL); @@ -1242,7 +1241,6 @@ pmac_ide_macio_resume(struct macio_dev * static int __devinit pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) { - ide_hwif_t *hwif; struct device_node *np; pmac_ide_hwif_t *pmif; void __iomem *base; @@ -1260,14 +1258,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev if (pmif == NULL) return -ENOMEM; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n"); - printk(KERN_ERR " %s\n", np->full_name); - rc = -ENODEV; - goto out_free_pmif; - } - if (pci_enable_device(pdev)) { printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " "%s\n", np->full_name); @@ -1304,7 +1294,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev hw.irq = pdev->irq; hw.dev = &pdev->dev; - rc = pmac_ide_setup_device(pmif, hwif, &hw); + rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ pci_set_drvdata(pdev, NULL); -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html