Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so
PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero.
Tighten checks on PCI BARs and also fix printk() message while on it.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/setup-pci.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -319,18 +319,18 @@ static ide_hwif_t *ide_hwif_configure(st
ctl = pci_resource_start(dev, 2*port+1);
base = pci_resource_start(dev, 2*port);
- if ((ctl && !base) || (base && !ctl)) {
- printk(KERN_ERR "%s: inconsistent baseregs (BIOS) "
- "for port %d, skipping\n", d->name, port);
- return NULL;
- }
- }
- if (!ctl) {
+ } else {
/* Use default values */
ctl = port ? 0x374 : 0x3f4;
base = port ? 0x170 : 0x1f0;
}
+ if (!base || !ctl) {
+ printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n",
+ d->name, port);
+ return NULL;
+ }
+
hwif = ide_find_port_slot(d);
if (hwif == NULL) {
printk(KERN_ERR "%s: too many IDE interfaces, no room in "
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
