Tejun Heo wrote: >Can you please describe what you did exactly? sil3726/4726 has some >problems when its first fan out port goes online and offline while it's >powered up. You want to keep it occupied at all times. > Here's the current setup: - PMP powered via computer's power supply; on with computer - SSD and bridges powered via computer's power supply; on with computer - FC9 with new 2.6.26-rc2-hotplug-patches installed and booted - Once computer is booted, login, open a terminal and dmesg -c For the case which fails: - plug SSD drive/bridge into PMP port 0 - plug eSata cable into PMP - plug eSata cable into eSata port on controller - watch the softreset timeout For the case which works: - plug eSata cable into PMP - plug eSata cable into eSata port on controller - watch the PMP become recognized - plug SSD drive/bridge into PMP port 0 - watch the SSD drive become recognized Steps above are repeatable. Previously I was applying power to the PMP while the drives were attached (PMP, bridges and drives all receiving power at the same time) and then plugging in the eSata cable, but this case always failed as well. >Also, does putting sslep(5) right before followup-SRST help? > I'll look at adding the sslep line and the new patch (independently). -Brian -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
