Linux USB Users
[Prev Page][Next Page]
- [PATCH 68/97] USB: ch341 serial: fix port number changed after resume
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 72/97] USB: make transfer_buffer_lengths in struct urb field u32
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 78/97] USB: CP2101 Support AN205 baud rates
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 74/97] USB: remove phidget drivers from kernel tree.
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 75/97] USB: don't send Set-Interface after reset
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 77/97] USB: use kzfree()
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 76/97] USB: usbfs: remove unneeded "inline" annotations
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 73/97] USB: make actual_length in struct urb field u32
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 71/97] USB: uhci: don't use pseudo negative values
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 70/97] USB: TWL: disable VUSB regulators when cable unplugged
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 69/97] USB: usbmon: Add binary API v1
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 60/97] USB: usb-storage: added missing MODULE_LICENSE("GPL") for usb-storage ums-* modules
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 63/97] USB: musb: rewrite host periodic endpoint allocation
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 66/97] USB: musb: only turn off vbus in OTG hosts
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 65/97] USB: musb: fix init oops crash with static FIFO config
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 19/97] USB: imx_udc: Fix IMX UDC gadget general irq handling
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 11/97] USB: ub: use USB API functions rather than constants
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 64/97] USB: musb: NAK timeout scheme on bulk RX endpoint
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 61/97] USB: allow libusb to talk to unauthenticated WUSB devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 25/97] USB: serial: export symbol of usb_serial_generic_resume
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 62/97] USB: composite: avoid inconsistent lock state
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 58/97] usb-storage: make karma a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 55/97] usb-storage: make datafab a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 56/97] usb-storage: make jumpshot a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 46/97] USB: fix ehci printk formats
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 53/97] usb-storage: make shuttle_usbat a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 54/97] usb-storage: make freecom a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 47/97] usb-serial: fix usb_serial_register bug when boot with nousb param
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 52/97] usb-storage: make cypress_atacb a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 51/97] usb-storage: make sddr55 a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 48/97] usb-storage: prepare for subdriver separation
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 49/97] usb-storage: make sddr09 a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 50/97] usb-storage: make isd200 a separate module
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 44/97] USB: serial: add qualcomm wireless modem driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 36/97] usb: kill prehistorical comments about USB_EHCI_HCD
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 41/97] USB: Add platform device support for the ISP1760 USB chip
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 37/97] USB: EHCI: Make timer_action out-of-line
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 38/97] USB: fix USB_STORAGE_CYPRESS_ATACB
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 34/97] USB: serial: remove recourse to generic method
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 35/97] USB: serial: refuse to open recently removed USB Serial devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 33/97] USB: skeleton: Use dev_info instead of info
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 32/97] usb_storage: make Kconfig note visible in the console
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 31/97] USB: serial: opticon: add serial line ioctls
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 29/97] USB: otg: adding nop usb transceiver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 30/97] USB: serial: opticon: add write support
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 28/97] USB: ftdi_sio: remove pointless syslog spew
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 26/97] USB: serial: use generic method if no alternative is provided in usb serial layer
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 21/97] USB: suspend/resume for opticon driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 13/97] USB: drivers: use USB API functions rather than constants
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 12/97] USB: Remove redundant test in pxa27x_udc and ftdi_sio
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 14/97] USB: gadget: remove duplicated #include
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 10/97] USB: Move definitions from usb.h to usb/ch9.h
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 09/97] USB: pxa27x_udc: add vbus_draw callback
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 08/97] USB: pxa27x_udc: add otg transceiver support
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 07/97] USB: pxa27x_udc: add vbus session handling
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 06/97] USB: pxa27x_udc: factor pullup code to prepare otg transceiver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 05/97] USB: gpio_vbus: add delayed vbus_session calls
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 04/97] usblp: continuously poll for status
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 02/97] USB: gadget: fix rndis regression
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 03/97] USB: usb-storage: increase max_sectors for tape drives
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 01/97] USB: add quirk to avoid config and interface strings
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [GIT PATCH] USB patches for 2.6.30 merge window
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH 07/13] [usb] changed ioctls to unlocked
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 07/13] [usb] changed ioctls to unlocked
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 07/13] [usb] changed ioctls to unlocked
- From: stoyboyker@xxxxxxxxx
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Fwd: Re: [Fwd: Re: [Bug 20703] HAL sometimes doesn't emit udi-removed signals]]
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- gadget: short_not_ok field in usb_request
- From: Ben Dooks <ben-linux@xxxxxxxxx>
- Re: Understanding delays in HID driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: avoid PM error messages during resume if a device was disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] twl4030-usb: add handler for unmasked events
- From: "Krogerus Heikki (EXT-Teleca/Helsinki)" <ext-heikki.krogerus@xxxxxxxxx>
- Re: [RFC] ARM i.MX21 Host Controller Driver
- From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
- Re: Understanding delays in HID driver
- From: Richard <rkm@xxxxxxxx>
- Re: [PATCH] usb: avoid PM error messages during resume if a device was disconnected
- From: Frans Pop <elendil@xxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: [PATCH] usb: avoid PM error messages during resume if a device was disconnected
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: avoid PM error messages during resume if a device was disconnected
- From: Frans Pop <elendil@xxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- [PATCH] usb: avoid PM error messages during resume if a device was disconnected
- From: Frans Pop <elendil@xxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- [PATCH] Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Re: How to implement the asynchronous notification in the etherdrivers?
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Fwd: Re: Problem Techsolo TG-40 Gamepad]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: OHCI hang after cc 9
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: isp1760-hcd.c driver BUG_ON(!skip_map)
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: Understanding delays in HID driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: twl4030-usb: add handler for unmasked events
- From: "Krogerus Heikki (EXT-Teleca/Helsinki)" <ext-heikki.krogerus@xxxxxxxxx>
- Re: First bulk write often doesn't seem to reach device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: SAS (Serial attached SCSI) in Linux
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- First bulk write often doesn't seem to reach device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: isp1760-hcd.c driver BUG_ON(!skip_map)
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- Understanding delays in HID driver
- From: Richard <rkm@xxxxxxxx>
- Re: OHCI hang after cc 9
- From: Zoltan Devai <zdevai@xxxxxxxxx>
- SAS (Serial attached SCSI) in Linux
- From: Subs <sar.subs@xxxxxxxxx>
- Re: How to implement the asynchronous notification in the etherdrivers?
- From: Franko Fang <huananhu@xxxxxxxxxx>
- Re: [Bugme-new] [Bug 12882] New: Don't work usb mass-storage driver for ChinaChip PMP USBDISK V100
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [Fwd: Re: Problem Techsolo TG-40 Gamepad]
- From: Jochen Kühner <jochen.kuehner@xxxxxx>
- Re: [PATCH 18/20] USB: Add Vendor/Product ID for new CDMA U727 to option driver
- From: Greg KH <gregkh@xxxxxxx>
- Key remapping on uncooperative device
- From: Dave Hansen <dave@xxxxxxxx>
- [patch]fix lockup of hid on reset
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [PATCH 2/2] MUSB: add CPPI interrupt handler
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 65/77] zd1201: convert to net_device_ops
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 64/77] zd1201: convert to internal net_device_stats
- From: David Miller <davem@xxxxxxxxxxxxx>
- [QUESTION] bulk out performance
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: How to implement the asynchronous notification in the ether drivers?
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 18/20] USB: Add Vendor/Product ID for new CDMA U727 to option driver
- From: Shivdas Gujare <shivdas.tech@xxxxxxxxx>
- OHCI hang after cc 9
- From: Zoltan Devai <zdevai@xxxxxxxxx>
- How to implement the asynchronous notification in the ether drivers?
- From: fangxiaozhi 00110321 <huananhu@xxxxxxxxxx>
- Re: [PATCH] USB: gadget: remove duplicated #include
- From: David Brownell <david-b@xxxxxxxxxxx>
- [PATCH 64/77] zd1201: convert to internal net_device_stats
- From: Stephen Hemminger <shemminger@xxxxxxxxxx>
- [PATCH 65/77] zd1201: convert to net_device_ops
- From: Stephen Hemminger <shemminger@xxxxxxxxxx>
- [PATCH] USB: gadget: remove duplicated #include
- From: Huang Weiyi <weiyi.huang@xxxxxxxxx>
- Re: [PATCH] input/joystick: add driver fortius 1942
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 2/2] MUSB: add CPPI interrupt handler
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 2/2] MUSB: add CPPI interrupt handler
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: pxa270 OHCI usb host problem
- From: Zachár Balázs <bzachar@xxxxxxxxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Fwd: Re: [Fwd: Re: [Bug 20703] HAL sometimes doesn't emit udi-removed signals]]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- pxa270 OHCI usb host problem
- From: Zachár Balázs <bzachar@xxxxxxxxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Daniel Mack <daniel@xxxxxxxx>
- [patch 2.6.29-rc8 + usb queue] pxa27x_udc: typo fixes and code cleanups
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [RFC] ARM i.MX21 Host Controller Driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: RNDIS regression
- From: David Brownell <david-b@xxxxxxxxxxx>
- [patch 2.6.29-rc8] usb gadget: fix rndis regression
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: RNDIS regression
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] USB:gadget:introduce isochronous source sink configuration driver
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Detecting a USB device with dual identity
- From: Imran M Yousuf <imyousuf@xxxxxxxxx>
- Re: [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: Greg KH <greg@xxxxxxxxx>
- Re: [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Greg KH <greg@xxxxxxxxx>
- [patch 2.6.29-rc8 2/2] usb gadget: gadget zero uses new suspend/resume hooks
- From: David Brownell <david-b@xxxxxxxxxxx>
- [patch 2.6.29-rc8 1/2] usb gadget: composite device-level suspend/resume hooks
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Detecting a USB device with dual identity
- From: Shivdas Gujare <shivdas.tech@xxxxxxxxx>
- Re: [PATCH] input/joystick: add driver fortius 1942
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH] input/joystick: add driver fortius 1942
- From: Peta Blaha <blahapeta@xxxxxxxxx>
- Detecting a USB device with dual identity
- From: Imran M Yousuf <imyousuf@xxxxxxxxx>
- [PATCH] USB: r8a66597-hcd: suspend/resume support
- From: Yoshihiro Shimoda <shimoda.yoshihiro@xxxxxxxxxxx>
- Re: usbfs reopen yields unusable device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: usbfs reopen yields unusable device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usbfs reopen yields unusable device.
- From: Dave Mielke <dave@xxxxxxxxx>
- [PATCH] USB: add quirk to avoid config and interface strings
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick) [success]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usbfs reopen yields unusable device.
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- usbfs reopen yields unusable device.
- From: Dave Mielke <dave@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick) [success]
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- Re: Companion controller issues?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Companion controller issues?
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: Companion controller issues?
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Companion controller issues?
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH 20/20] USB: storage: Unusual USB device Prolific 2507 variation added
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 19/20] USB: Add device id for Option GTM380 to option driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 18/20] USB: Add Vendor/Product ID for new CDMA U727 to option driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 17/20] USB: Updated unusual-devs entry for USB mass storage on Nokia 6233
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 15/20] USB: EHCI: expedite unlinks when the root hub is suspended
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 16/20] USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 14/20] USB: EHCI: Fix isochronous URB leak
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 13/20] USB: option.c: add ZTE 622 modem device
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 12/20] USB: wusbcore/wa-xfer, fix lock imbalance
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 11/20] USB: misc/vstusb, fix lock imbalance
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 10/20] USB: misc/adutux, fix lock imbalance
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 09/20] USB: image/mdc800, fix lock imbalance
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 08/20] USB: atm/cxacru, fix lock imbalance
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 07/20] USB: unusual_devs: Add support for GI 0431 SD-Card interface
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 06/20] USB: serial: new cp2101 device id
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 05/20] USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 04/20] USB: serial: add FTDI USB/Serial converter devices
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 03/20] USB: usbfs: keep async URBs until the device file is closed
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 02/20] USB: usbtmc: add protocol 1 support
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [PATCH 01/20] USB: usbtmc: fix stupid bug in open()
- From: Greg Kroah-Hartman <gregkh@xxxxxxx>
- [GIT PATCH] USB patches for 2.6-git
- From: Greg KH <gregkh@xxxxxxx>
- Re: RNDIS regression
- From: Radek Polak <psonek2@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: Greg KH <greg@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- Re: Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- [PATCH][RFC] USB: allow malformed LANGID descriptors
- From: Daniel Mack <daniel@xxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: Greg KH <greg@xxxxxxxxx>
- Re: Problem Techsolo TG-40 Gamepad
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- [PATCH] uwb: Shouldn't event_size be ssize_t?
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: Drivers need for usb file system
- From: "Naveen@moschip" <mamindlapalli.naveen@xxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: Re: [PATCH] input/joystick: add driver fortius 1942
- From: Peta Blaha <blahapeta@xxxxxxxxx>
- Re: [PATCH] input/joystick: add driver fortius 1942
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] input/joystick: add driver fortius 1942
- From: Peta Blaha <blahapeta@xxxxxxxxx>
- RE: Regarding UASP in USB2.0
- From: Rajkrishna Pillai RAVINDRAN <rajkrishna@xxxxxxxxxxxxxx>
- Re: [PATCH] input/joystick: add driver fortius 1942
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] input/joystick: add driver fortius 1942
- From: Peta Blaha <blahapeta@xxxxxxxxx>
- Re: [usb-storage] Mitsuca DC7328BR trouble
- From: Roberto Gliese <rgliese@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] EHCI: expedite unlinks when the root hub is suspended
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- Problem Techsolo TG-40 Gamepad
- From: Jochen Kühner <jochen.kuehner@xxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] EHCI: expedite unlinks when the root hub is suspended
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: Drivers need for usb file system
- From: "Naveen@moschip" <mamindlapalli.naveen@xxxxxxxxxxx>
- Re: xHCI Driver
- From: Greg KH <greg@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- Regarding UASP in USB2.0
- From: Subs <sar.subs@xxxxxxxxx>
- [PATCH 001/001] usb-storage: Unusual USB device Prolific 2507 variation added
- From: "Thomas Bartosik" <tbartdev@xxxxxxxxxxxxxx>
- [PATCH-signed] USB: Add device id for Option GTM380 to option driver
- From: Achilleas Kotsis <akots@xxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- Re: [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [BUG 2.6.29-rc8-git2] generic-usb: probe of 0003:06A3:0006.0001 failed with error -32 (Saitek joystick)
- From: Melchior FRANZ <melchior.franz@xxxxxxxxx>
- xHCI Driver
- From: Madhukar G <madhukar.linux@xxxxxxxxx>
- Re: [usb-storage] Mitsuca DC7328BR trouble
- From: Maciej Grela <maciej.grela@xxxxxxxxx>
- Re: Usb controlled PWM servo
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PROBLEM]: potential unaligned memory access in drivers/usb/gadget/rndis.c
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] Add Vendor/Product ID for new CDMA U727 to option driver
- From: Dirk Hohndel <hohndel@xxxxxxxxxxxxx>
- Re: [PATCH] Add Vendor/Product ID for new CDMA U727 to option driver
- From: Shivdas Gujare <shivdas.tech@xxxxxxxxx>
- [PATCH] USB: Add device id for Option GTM380 to option driver
- From: Achilleas Kotsis <akots@xxxxxxxxxxx>
- Mitsuca DC7328BR trouble
- From: Roberto Gliese <rgliese@xxxxxxxxx>
- [PATCH] Add Vendor/Product ID for new CDMA U727 to option driver
- From: Dirk Hohndel <hohndel@xxxxxxxxxxxxx>
- [PATCH] Updated unusual-devs entry for USB mass storage on Nokia 6233 (fwd)
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: Usb controlled PWM servo
- From: Greg KH <greg@xxxxxxxxx>
- Re: Usb controlled PWM servo
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: Usb controlled PWM servo
- From: Paul Thomas <pthomas8589@xxxxxxxxx>
- Re: Usb controlled PWM servo
- From: Daniel Lelis Baggio <danielbaggio@xxxxxxxxx>
- Re: Usb controlled PWM servo
- From: Paul Thomas <pthomas8589@xxxxxxxxx>
- Usb controlled PWM servo
- From: Daniel Lelis Baggio <danielbaggio@xxxxxxxxx>
- Re: [PROBLEM]: potential unaligned memory access in drivers/usb/gadget/rndis.c
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: Test patch for OHCI RHSC
- From: Meelis Roos <mroos@xxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: [PROBLEM]: potential unaligned memory access in drivers/usb/gadget/rndis.c
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
- Re: non working device: i-gotU usb GPS data-logger
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
- [PATCH] Fix cp2101 USB serial device driver termios functions for console use
- From: VomLehn <dvomlehn@xxxxxxxxx>
- Re: non working device: i-gotU usb GPS data-logger
- From: paul van den berg <paulbvdberg@xxxxxxxxx>
- Re: non working device: i-gotU usb GPS data-logger
- From: Greg KH <greg@xxxxxxxxx>
- Re: non working device: i-gotU usb GPS data-logger
- From: paul van den berg <paulbvdberg@xxxxxxxxx>
- Re: USB gadget problem with close of a gadgetfs device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Drivers need for usb file system
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: non working device: i-gotU usb GPS data-logger
- From: Greg KH <greg@xxxxxxxxx>
- Re: Drivers need for usb file system
- From: Greg KH <greg@xxxxxxxxx>
- Drivers need for usb file system
- From: vichy <vichy.kuo@xxxxxxxxx>
- [PATCH] musb_host: fix isochronous Tx DMA (take 2)
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530
- From: Dan Williams <dcbw@xxxxxxxxxx>
- non working device: i-gotU usb GPS data-logger
- From: paul van den berg <paulbvdberg@xxxxxxxxx>
- Re: [PROBLEM]: potential unaligned memory access in drivers/usb/gadget/rndis.c
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: Majordomo results
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: USB interrupt latency
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: Bandwidth allocation problem {was Re: Majordomo results]
- From: Natale Vinto <ebballon@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [PATCH V3] Fix IMX UDC gadget bugs
- From: Greg KH <greg@xxxxxxxxx>
- Bandwidth allocation problem {was Re: Majordomo results]
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] fix mos7840 in kernels >=2.6.26.3
- From: Greg KH <greg@xxxxxxxxx>
- Re: Majordomo results
- From: Natale Vinto <ebballon@xxxxxxxxx>
- [PATCH 1/5] USB: atm/cxacru, fix lock imbalance
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
- [PATCH 2/5] USB: image/mdc800, fix lock imbalance
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
- [PATCH 5/5] USB: wusbcore/wa-xfer, fix lock imbalance
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
- [PATCH 4/5] USB: misc/vstusb, fix lock imbalance
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
- [PATCH 3/5] USB: misc/adutux, fix lock imbalance
- From: Jiri Slaby <jirislaby@xxxxxxxxx>
- Re: DEVFS Disconnect Issue
- From: Greg KH <greg@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: DEVFS Disconnect Issue
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- DEVFS Disconnect Issue
- From: Leonid <leonidv11@xxxxxxxxx>
- Re: USB interrupt latency
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- USB interrupt latency
- From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Greg KH <greg@xxxxxxxxx>
- Re: Majordomo results
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Majordomo results
- From: Natale Vinto <ebballon@xxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- RE: [RFC PATCH] usb-serial/option: modem port types
- From: "Filip Aben" <F.Aben@xxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Greg KH <greg@xxxxxxxxx>
- Re: pxa27x_udc and pxa3xx compatibility
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH 2.6.29-rc7] unusual_devs: Add support for GI 0431 SD-Card interface
- From: Phil Dibowitz <phil@xxxxxxxx>
- Re: [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Majordomo results
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [PATCH 26/31] usb: Auto-load cdc_acm module when device opened.
- From: Kay Sievers <kay.sievers@xxxxxxxx>
- Re: Majordomo results
- From: Natale Vinto <ebballon@xxxxxxxxx>
- Re: [PATCH 26/31] usb: Auto-load cdc_acm module when device opened.
- From: Scott James Remnant <scott@xxxxxxxxxxxxx>
- Re: [PATCH 26/31] usb: Auto-load cdc_acm module when device opened.
- From: Greg KH <greg@xxxxxxxxx>
- Re: WUSB driver crash after DN_CONNECT message from WUSB device
- From: David Vrabel <david.vrabel@xxxxxxx>
- [PATCH 26/31] usb: Auto-load cdc_acm module when device opened.
- From: Scott James Remnant <scott@xxxxxxxxxxxxx>
- Re: [RFC] usb: g_file_storage: don't enqueue partial buffers where possible
- From: David Vrabel <david.vrabel@xxxxxxx>
- [PATCH 2.6.29-rc7] unusual_devs: Add support for GI 0431 SD-Card interface
- From: Jan Dumon <j.dumon@xxxxxxxxxx>
- Re: [PATCH 2.6.29-rc7] unusual_devs: Add support for GI 0431 SD-Card interface
- From: Jan Dumon <j.dumon@xxxxxxxxxx>
- Re: [PATCH 2.6.29-rc7] unusual_devs: Add support for GI 0431 SD-Card interface
- From: Greg KH <greg@xxxxxxxxx>
- Re: Majordomo results
- From: Greg KH <greg@xxxxxxxxx>
- Re: Majordomo results
- From: Natale Vinto <ebballon@xxxxxxxxx>
- [PATCH 2.6.29-rc7] unusual_devs: Add support for GI 0431 SD-Card interface
- From: Jan Dumon <j.dumon@xxxxxxxxxx>
- RE: WUSB driver crash after DN_CONNECT message from WUSB device
- From: "Eyal Reizer" <eyalr@xxxxxxxxxx>
- [PATCH 2.6.28.6] ipaq: handle 4 endpoint devices
- From: Mark Ellis <mark@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Greg KH <greg@xxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: DaVinci USB DMA
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: 2.6.27.2 USB reset/IO Error problem when high load on ICH9 USB
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: 2.6.26.6-79.fc9: turning off one USB drive disconnected other USB drives
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Matthias Urlichs <smurf@xxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- [RFC PATCH] usb-serial/option: modem port types
- From: Dan Williams <dcbw@xxxxxxxxxx>
- [PATCH] usbfs: remove unneeded "inline" annotations
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usbfs: keep async URBs until the device file is closed
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Reap URB on disconnected device never returns
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] usb: g_file_storage: don't enqueue partial buffers where possible
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Reap URB on disconnected device never returns
- From: Martin Poupe <martin.poupe@xxxxxxxx>
- Re: WUSB driver crash after DN_CONNECT message from WUSB device
- From: David Vrabel <david.vrabel@xxxxxxx>
- [RFC] usb: g_file_storage: don't enqueue partial buffers where possible
- From: David Vrabel <david.vrabel@xxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- RE: pxa27x_udc: Vernon's pending patches
- From: "Sauder, Vernon [InHand]" <vsauder@xxxxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: Blackberry regression
- From: Chris Frey <cdfrey@xxxxxxxxxxxxxx>
- Re: pxa27x_udc and pxa3xx compatibility
- From: Eric Miao <eric.y.miao@xxxxxxxxx>
- RE: pxa27x_udc and pxa3xx compatibility
- From: Eric Miao <ymiao3@xxxxxxxxxxx>
- Re: [RFC] ARM i.MX21 Host Controller Driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] ARM i.MX21 Host Controller Driver
- From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
- pxa27x_udc: Vernon's pending patches
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [RFC] ARM i.MX21 Host Controller Driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [RFC] ARM i.MX21 Host Controller Driver
- From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
- pxa27x_udc and pxa3xx compatibility
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: file_storage and composite gadget support
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: more u32 conversion after transfer_buffer_length and actual_length
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: file_storage and composite gadget support
- From: Mike Lockwood <lockwood@xxxxxxxxxxx>
- Re: [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Greg KH <greg@xxxxxxxxx>
- [BUG] Loading both ehci-hcd and uhci-hcd drivers causes my printer to fail
- From: Maxim Levitsky <maximlevitsky@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 03/03] USB: make actual_length in struct urb field u32
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 02/03] USB: make transfer_buffer_lengths in struct urb field u32
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Blackberry regression
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/03] USB: uhci: don't use pseudo negative values
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH resend] musb_gadget: fix STALL handling
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] USB:gadget:introduce isochronous source sink configuration driver
- From: tom.leiming@xxxxxxxxx
- Re: [PATCH 02/03] USB: make transfer_buffer_lengths in struct urb field u32
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- ohci-s3c2410: remove <mach/hardware.h> include
- From: Ben Dooks <ben@xxxxxxxxxxxx>
- S3C: Move usb-control.h to platform include
- From: Ben Dooks <ben@xxxxxxxxxxxx>
- ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
- From: Ben Dooks <ben@xxxxxxxxxxxx>
- Re: [PATCH 03/03] USB: make actual_length in struct urb field u32
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 02/03] USB: make transfer_buffer_lengths in struct urb field u32
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- [PATCH 03/03] USB: make actual_length in struct urb field u32
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 02/03] USB: make transfer_buffer_lengths in struct urb field u32
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 01/03] USB: uhci: don't use pseudo negative values
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 00/03] struct urb field changes, take 3
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- Re: S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Greg KH <gregkh@xxxxxxx>
- Re: usb-storage: Wait less time for settling when a memory device is connected
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Bugme-new] [Bug 12828] New: usbserial and huawei-e220
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Bugme-new] [Bug 12828] New: usbserial and huawei-e220
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] MUSB: fix unhandled gadget endpoint 0 IRQs
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: Blackberry regression
- From: Chris Frey <cdfrey@xxxxxxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: usb-storage: Wait less time for settling when a memory device is connected
- From: Martin Bammer <mrbm74@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- S4 hang with uvcvideo causing "Unlink after no-IRQ? Controller is probably using the wrong IRQ."
- From: Brandon Philips <brandon@xxxxxxxx>
- Re: usb-storage: Wait less time for settling when a memory device is connected
- From: Matthew Dharm <mdharm-usb@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] MUSB: fix unhandled gadget endpoint 0 IRQs
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: usb-storage: Wait less time for settling when a memory device is connected
- From: Greg KH <greg@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: usb-storage: Wait less time for settling when a memory device is connected
- From: Martin Bammer <mrbm74@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: Test application for USB 3.0 Device from USB 3.0 Host
- From: Greg KH <greg@xxxxxxxxx>
- Test application for USB 3.0 Device from USB 3.0 Host
- From: usbanalyst <emailme.friend@xxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Reap URB on disconnected device never returns
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Julie Zhu <julie.zhu@xxxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Julie Zhu <julie.zhu@xxxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Fix g_ether ethtool link reporting
- From: Jonathan McDowell <noodles@xxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Julie Zhu <julie.zhu@xxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: EHCI compliance test suite on Linux?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Blackberry regression
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: EHCI compliance test suite on Linux?
- From: Julie Zhu <julie.zhu@xxxxxxxxxx>
- Re: EHCI compliance test suite on Linux?
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- EHCI compliance test suite on Linux?
- From: Julie Zhu <julie.zhu@xxxxxxxxxx>
- Reap URB on disconnected device never returns
- From: Martin Poupe <mpoupe@xxxxxxxxx>
- Re: ECHI_HCD issue (Unlink after no-IRQ?) with kernel 2.6.29-rc7 [SOLVED]
- From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
- [PATCH] fix mos7840 in kernels >=2.6.26.3
- From: Ivan Avdeev <lists@xxxxxx>
- Re: Modifying MSD Driver
- From: Greg KH <greg@xxxxxxxxx>
- Re: EHCI debug documentation
- From: Greg KH <gregkh@xxxxxxx>
- Modifying MSD Driver
- From: Madhukar G <madhukar.linux@xxxxxxxxx>
- Re: Blackberry regression
- From: Chris Frey <cdfrey@xxxxxxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: Blackberry regression
- From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
- Re: Blackberry regression
- From: Chris Frey <cdfrey@xxxxxxxxxxxxxx>
- [PATCH] usb/serial: adding FTDI USB/Serial converter devices
- From: Robert Richter <robert.richter@xxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] x86/doc: doc the using earlyprintk=dbgp
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- Re: Blackberry regression
- From: Chris Frey <cdfrey@xxxxxxxxxxxxxx>
- Re: EHCI debug documentation
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
- Re: EHCI debug documentation
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [patch 2.6.29-rc5-git] usb/musb: make Davinci *work* in mainline
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: KGDB on beagle
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: EHCI debug documentation
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Fix g_ether ethtool link reporting
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: EHCI debug documentation
- From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
- Re: EHCI debug documentation
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH v2] usb: RNDIS: add support for OID OID_802_3_MAXIMUM_LIST_SIZE and OID_802_3_MAC_OPTIONS
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: USB host Issue: scsi command abort
- From: David Brownell <david-b@xxxxxxxxxxx>
- RE: USB host Issue: scsi command abort
- From: "Stephane Cerveau" <scerveau@xxxxxxxx>
- [PATCH] pedantic: spelling correction in comment for ch9.h
- From: "D.J. Capelis" <dev@xxxxxxxxxx>
- Re: EHCI debug documentation
- From: Ingo Molnar <mingo@xxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ECHI_HCD issue (Unlink after no-IRQ?) with kernel 2.6.29-rc7
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: Fix g_ether ethtool link reporting
- From: Jonathan McDowell <noodles@xxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- Re: GSM device for help
- From: Hinko Kocevar <hinko.kocevar@xxxxxxxxxxxx>
- RE: USB host Issue: scsi command abort
- From: "Stephane Cerveau" <scerveau@xxxxxxxx>
- Re: Fix g_ether ethtool link reporting
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- ECHI_HCD issue (Unlink after no-IRQ?) with kernel 2.6.29-rc7
- From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
- Fix g_ether ethtool link reporting
- From: Jonathan McDowell <noodles@xxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] hid: DragonRise Inc. game controller force feedback support
- From: Richard Walmsley <richwalm@xxxxxxxxx>
- RE: USB host Issue: scsi command abort
- From: "Stephane Cerveau" <scerveau@xxxxxxxx>
- Re: [PATCH] hid: DragonRise Inc. game controller force feedback support
- From: Jiri Kosina <jkosina@xxxxxxx>
- [PATCH] hid: DragonRise Inc. game controller force feedback support
- From: Richard Walmsley <richwalm@xxxxxxxxx>
- PATCH [UPDATED] [3/3] Documentation/ABI/testing/game_device-sysfs-interface: Document game_device interface added to xpad driver
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- PATCH [UPDATED] [2/3] Documentation/input/xpad.txt: Update for new driver functionality
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- PATCH [UPDATED] [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- PATCH [UPDATED] [0/3] input: xpad.c - Xbox 360 wireless and sysfs support
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: EHCI debug documentation
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: EHCI debug documentation
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- EHCI debug documentation
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] USB: do not convert negative transfer_buffer_lengths to positive
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: [PATCH V3] Fix IMX UDC gadget bugs
- From: Darius <augulis.darius@xxxxxxxxx>
- [PATCH V3] Fix IMX UDC gadget bugs
- From: Darius <augulis.darius@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Greg KH <greg@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: Olimex ARM-USB-OCD and ftdi-sio driver
- From: Greg KH <greg@xxxxxxxxx>
- Olimex ARM-USB-OCD and ftdi-sio driver
- From: Jon Smirl <jonsmirl@xxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Greg KH <greg@xxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: USB Host Driver
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Greg KH <greg@xxxxxxxxx>
- Re: [patch 2.6.29-rc5-git] usb/musb: make Davinci *work* in mainline
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Mike Murphy <mamurph@xxxxxxxxxxxxxx>
- Re: PATCH [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface
- From: Greg KH <greg@xxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]