> I can not test the patch currently - for some reason, my C100 does not > boot after power outage. It displays SI instead of SILO and then after a > minut Program terminated. This is a long time followup on my Sun Fire V100 case. I revied the machine, updated Debian and compiled 2.6.29-rc8 and testbooted it with 2 USB devices attached. Works fine, no noticable problems - thanks everyone involved, esp. Alan! lsusb: Bus 001 Device 003: ID 08e6:0430 Gemplus GemPC430 SmartCard Reader Bus 001 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Dmesg excerpt: [ 83.867152] usbcore: registered new device driver usb [ 84.112407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 84.193744] ohci_hcd: block sizes: ed 80 td 96 [ 84.252205] PCI: Enabling device: (0000:00:0a.0), cmd 2 [ 84.320916] ohci_hcd 0000:00:0a.0: OHCI Host Controller [ 84.389748] drivers/usb/core/inode.c: creating file 'devices' [ 84.465327] drivers/usb/core/inode.c: creating file '001' [ 84.536294] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [ 84.633720] ohci_hcd 0000:00:0a.0: created debug files [ 84.701349] ohci_hcd 0000:00:0a.0: irq 11, io mem 0x1ff01000000 [ 85.007663] ohci_hcd 0000:00:0a.0: OHCI controller state [ 85.077580] ohci_hcd 0000:00:0a.0: OHCI 1.0, NO legacy support registers [ 85.165749] ohci_hcd 0000:00:0a.0: control 0x083 HCFS=operational CBSR=3 [ 85.253869] ohci_hcd 0000:00:0a.0: cmdstatus 0x00000 SOC=0 [ 85.325967] ohci_hcd 0000:00:0a.0: intrstatus 0x00000044 RHSC SF [ 85.404934] ohci_hcd 0000:00:0a.0: intrenable 0x8000000a MIE RD WDH [ 85.487333] ohci_hcd 0000:00:0a.0: hcca frame #01e4 [ 85.551442] ohci_hcd 0000:00:0a.0: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) [ 85.642984] ohci_hcd 0000:00:0a.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 85.729955] ohci_hcd 0000:00:0a.0: roothub.status 00008000 DRWE [ 85.807789] ohci_hcd 0000:00:0a.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS [ 85.910775] ohci_hcd 0000:00:0a.0: roothub.portstatus [1] 0x00010101 CSC PPS CCS [ 86.008102] usb usb1: default language 0x0409 [ 86.065397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 86.154623] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 86.249605] usb usb1: Product: OHCI Host Controller [ 86.313694] usb usb1: Manufacturer: Linux 2.6.29-rc8 ohci_hcd [ 86.389236] usb usb1: SerialNumber: 0000:00:0a.0 [ 86.450226] usb usb1: uevent [ 86.488137] usb usb1: usb_probe_device [ 86.537414] usb usb1: configuration #1 chosen from 1 choice [ 86.610694] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 86.686283] usb 1-0:1.0: uevent [ 86.727614] hub 1-0:1.0: usb_probe_interface [ 86.783668] hub 1-0:1.0: usb_probe_interface - got id [ 86.850063] hub 1-0:1.0: USB hub found [ 86.899389] hub 1-0:1.0: 2 ports detected [ 86.951999] hub 1-0:1.0: standalone hub [ 87.002386] hub 1-0:1.0: no power switching (usb 1.0) [ 87.068781] hub 1-0:1.0: global over-current protection [ 87.137467] hub 1-0:1.0: power on to power good time: 4ms [ 87.208451] hub 1-0:1.0: local power source is good [ 87.272546] hub 1-0:1.0: no over-current condition exists [ 87.343516] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 87.434307] drivers/usb/core/inode.c: creating file '001' [ 87.542292] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS [ 87.659063] hub 1-0:1.0: port 1: status 0301 change 0001 [ 87.729026] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS [ 87.840025] hub 1-0:1.0: port 2: status 0101 change 0001 [ 88.000899] hub 1-0:1.0: state 7 ports 2 chg 0006 evt 0000 [ 88.073120] hub 1-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 88.230897] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 88.410872] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 88.610829] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 88.832438] usb 1-1: skipped 1 descriptor after interface [ 88.915567] usb 1-1: default language 0x0409 [ 89.033490] usb 1-1: New USB device found, idVendor=046d, idProduct=c00e [ 89.134364] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 89.239518] usb 1-1: Product: USB-PS/2 Optical Mouse [ 89.304746] usb 1-1: Manufacturer: Logitech [ 89.360024] usb 1-1: uevent [ 89.396795] usb 1-1: usb_probe_device [ 89.444929] usb 1-1: configuration #1 chosen from 1 choice [ 89.670781] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 89.745373] usb 1-1:1.0: uevent [ 89.786946] drivers/usb/core/inode.c: creating file '002' [ 89.858086] hub 1-0:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 90.023646] usbcore: registered new interface driver hiddev [ 90.097024] usbhid 1-1:1.0: usb_probe_interface [ 90.156581] usbhid 1-1:1.0: usb_probe_interface - got id [ 90.275137] input: Logitech USB-PS/2 Optical Mouse as /devices/root/f0069d48/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/input/input0 [ 90.430124] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0 [ 90.598450] usbcore: registered new interface driver usbhid [ 90.671657] usbhid: v2.6:USB HID core driver [ 90.737150] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS [ 90.910953] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 91.130866] ohci_hcd 0000:00:0a.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS [ 91.350921] usb 1-2: ep0 maxpacket = 8 [ 91.413322] usb 1-2: default language 0x0409 [ 91.589271] usb 1-2: New USB device found, idVendor=08e6, idProduct=0430 [ 91.679068] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0 [ 91.775167] usb 1-2: Product: GEMPC430, USB Card Reader from GEMPLUS [ 91.858666] usb 1-2: Manufacturer: GEMPLUS [ 91.912774] usb 1-2: uevent [ 91.949463] usb 1-2: usb_probe_device [ 91.997605] usb 1-2: configuration #1 chosen from 1 choice [ 92.082546] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 92.157217] usb 1-2:1.0: uevent [ 92.198972] drivers/usb/core/inode.c: creating file '003' [ 92.270173] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 -- Meelis Roos (mroos@xxxxxxxx) -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
