I thought i attach the windows log, because the gamepad usb stick (it's
a wireless gamepad) is under linux correctly idetified as a joystick,
but the gamepad itself does not connect to the stick (under windows it
works with the windows hid driver). SO i thought it is a problem how the
stick is intialized in linux and a windows log is good to compare.
Now i attached demsg and usbmon log, hop that someone can help me.
The device is correctly detected as a joystick, but because the joystick
doesnt connect to the stick a run of jscan and the devicename does
return 0 for every axis and button!
Am 17.03.2009 14:50, schrieb Alan Stern:
On Mon, 16 Mar 2009, [ISO-8859-15] Jochen Kühner wrote:
I've a problem with a a techsolo tg-40 gamepad.
It's recognized by linux-kernel 2.6.28 as a acrux rf usb gamepad 8206
but the gamepad is not connecticng to it's usb stick. On windows the
gamepad is working with the standart windows hid drivers, on linux not.
I think someting on the initalisation of the usb stick goes wrong
because the gamepad cannot connect to it.
I've attached a log of the initialization of the usb device on windows,
gernated with USBTrace, maybe someone can help me.
Knowing what happens under Windows doesn't tell us very much about the
problem under Linux. You should collect a trace using usbmon with
Linux (see Documentation/usb/usbmon.txt) and also post the dmesg log.
Alan Stern
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-rc8 (root@tvserver) (gcc version 4.3.3 20090110 (prerelease) (Debian 4.3.2-2) ) #1 SMP Wed Mar 18 16:13:50 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001bef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bef3000 - 000000001bf00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001c000000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x1bef0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1bef0000 @ 10000-15000
[ 0.000000] ACPI: RSDP 000F6D00, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 1BEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1BEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 1BEF3180, 6E72 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BEF0000, 0040
[ 0.000000] ACPI: MCFG 1BEFA100, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 1BEFA040, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bef0000
[ 0.000000] low ram: 00000000 - 1bef0000
[ 0.000000] bootmap 00011000 - 000147e0
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 001bef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00006d25fc] TEXT DATA BSS ==> [0000100000 - 00006d25fc]
[ 0.000000] #4 [00006d3000 - 00006d6000] INIT_PG_TABLE ==> [00006d3000 - 00006d6000]
[ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000]
[ 0.000000] found SMP MP-table at [c00f5270] 000f5270
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001bef0
[ 0.000000] HighMem 0x0001bef0 -> 0x0001bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bef0
[ 0.000000] On node 0 totalpages: 114303
[ 0.000000] free_area_init_node: node 0, pgdat c05aca00, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109458 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113409
[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.1.200:/tftpboot/fernseh/ fastboot ip=dhcp init=/sbin/init BOOT_IMAGE=bzImage2.6.29
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.255 MHz processor.
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.003333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.003333] Memory: 447052k/457664k available (3319k kernel code, 10060k reserved, 1571k data, 388k init, 0k highmem)
[ 0.003333] virtual kernel memory layout:
[ 0.003333] fixmap : 0xfff84000 - 0xfffff000 ( 492 kB)
[ 0.003333] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.003333] vmalloc : 0xdc6f0000 - 0xff7fe000 ( 561 MB)
[ 0.003333] lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
[ 0.003333] .init : 0xc05cf000 - 0xc0630000 ( 388 kB)
[ 0.003333] .data : 0xc043dfef - 0xc05c6e68 (1571 kB)
[ 0.003333] .text : 0xc0100000 - 0xc043dfef (3319 kB)
[ 0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.003341] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.44 BogoMIPS (lpj=5357516)
[ 0.003456] Security Framework initialized
[ 0.003496] SELinux: Disabled at boot.
[ 0.003548] Mount-cache hash table entries: 512
[ 0.003710] Initializing cgroup subsys ns
[ 0.003749] Initializing cgroup subsys cpuacct
[ 0.003788] Initializing cgroup subsys devices
[ 0.003842] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003883] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.003922] Intel machine check architecture supported.
[ 0.003962] Intel machine check reporting enabled on CPU#0.
[ 0.004000] using C1E aware idle routine
[ 0.004044] Checking 'hlt' instruction... OK.
[ 0.017016] SMP alternatives: switching to UP code
[ 0.209950] ACPI: Core revision 20081204
[ 0.223227] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.226666] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.226666] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.226666] ..... (found apic 0 pin 0) ...
[ 0.233332] ....... failed.
[ 0.233332] ...trying to set up timer as Virtual Wire IRQ...
[ 0.233332] ..... failed.
[ 0.233332] ...trying to set up timer as ExtINT IRQ...
[ 0.269131] ..... works.
[ 0.269166] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[ 0.269999] Brought up 1 CPUs
[ 0.269999] Total of 1 processors activated (3215.44 BogoMIPS).
[ 0.269999] CPU0 attaching NULL sched-domain.
[ 0.269999] net_namespace: 1056 bytes
[ 0.269999] Booting paravirtualized kernel on bare hardware
[ 0.269999] NET: Registered protocol family 16
[ 0.269999] ACPI: bus type pci registered
[ 0.269999] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.269999] PCI: MCFG area at f0000000 reserved in E820
[ 0.269999] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.269999] PCI: Using MMCONFIG for extended config space
[ 0.269999] PCI: Using configuration type 1 for base access
[ 0.270045] bio: create slab <bio-0> at 0
[ 0.271359] ACPI: EC: Look up EC in DSDT
[ 0.280189] ACPI: Denied BIOS AML access to invalid port 0x4d0+0x2 (ELCR)
[ 0.280232] ACPI Exception (dsopcode-0419): AE_AML_ILLEGAL_ADDRESS, During address validation of OpRegion [ELCR] [20081204]
[ 0.283253] ACPI: Interpreter enabled
[ 0.283292] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.283462] ACPI: Using IOAPIC for interrupt routing
[ 0.299138] ACPI: No dock devices found.
[ 0.299198] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.299508] pci 0000:00:05.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.299515] pci 0000:00:05.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.299521] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.299527] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.299729] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.299813] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f]
[ 0.299820] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f]
[ 0.299845] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.299889] pci 0000:00:0a.1: PME# disabled
[ 0.299989] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.300029] pci 0000:00:0b.0: supports D1 D2
[ 0.300032] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300074] pci 0000:00:0b.0: PME# disabled
[ 0.300135] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.300168] pci 0000:00:0b.1: supports D1 D2
[ 0.300170] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300212] pci 0000:00:0b.1: PME# disabled
[ 0.300286] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f]
[ 0.300329] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.300335] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.300340] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.300346] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.300351] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
[ 0.300357] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.300444] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe028000-0xfe02bfff]
[ 0.300480] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.300521] pci 0000:00:10.1: PME# disabled
[ 0.300589] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.300595] pci 0000:00:14.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.300620] pci 0000:00:14.0: supports D1 D2
[ 0.300622] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300664] pci 0000:00:14.0: PME# disabled
[ 0.303468] pci 0000:01:03.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff]
[ 0.303475] pci 0000:01:03.0: reg 14 io port: [0xcc00-0xcc7f]
[ 0.303512] pci 0000:01:03.0: supports D2
[ 0.303514] pci 0000:01:03.0: PME# supported from D2 D3hot D3cold
[ 0.303556] pci 0000:01:03.0: PME# disabled
[ 0.303624] pci 0000:00:10.0: transparent bridge
[ 0.303663] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff]
[ 0.303667] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.303672] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.303679] pci_bus 0000:00: on NUMA node 0
[ 0.303690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.303926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.436529] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.437110] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.437685] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.438258] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.438831] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.439405] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.440001] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15)
[ 0.440526] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.441104] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.441683] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.442263] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 0.442794] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.443379] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.443909] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.444488] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.445063] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.445636] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.446210] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.446790] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.447316] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.447939] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.448413] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.448886] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.449358] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.449831] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.450309] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.450781] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.451230] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.451703] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.452244] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.452784] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.453302] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.453847] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.454387] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.454904] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.455445] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.455986] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.456528] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.457067] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.457608] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.458125] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.458865] PCI: Using ACPI for IRQ routing
[ 0.459189] pnp: PnP ACPI init
[ 0.459232] ACPI: bus type pnp registered
[ 0.467217] pnp: PnP ACPI: found 11 devices
[ 0.467257] ACPI: ACPI bus type pnp unregistered
[ 0.467297] PnPBIOS: Disabled by ACPI PNP
[ 0.467344] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.467385] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.467426] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.467467] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.467508] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.467550] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.467591] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.467634] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.467676] system 00:01: iomem range 0x1c000000-0x1fffffff has been reserved
[ 0.467722] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.467763] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.467809] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.467856] system 00:0a: iomem range 0xd5800-0xd7fff has been reserved
[ 0.467896] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.467938] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.467979] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.468020] system 00:0a: iomem range 0x1bef0000-0x1befffff could not be reserved
[ 0.468071] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.468112] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.468153] system 00:0a: iomem range 0x100000-0x1beeffff could not be reserved
[ 0.468203] system 00:0a: iomem range 0x1bf00000-0x1fefffff could not be reserved
[ 0.468254] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.468295] system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.468337] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.468379] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.468420] system 00:0a: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.468462] system 00:0a: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.503532] pci 0000:00:10.0: PCI bridge, secondary bus 0000:01
[ 0.503574] pci 0000:00:10.0: IO window: 0xc000-0xcfff
[ 0.503615] pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.503656] pci 0000:00:10.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.503715] pci 0000:00:10.0: setting latency timer to 64
[ 0.503720] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.503723] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.503727] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.503730] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.503733] pci_bus 0000:01: resource 2 mem: [0xfde00000-0xfdefffff]
[ 0.503737] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.503740] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.503793] NET: Registered protocol family 2
[ 0.503930] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.504268] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.504417] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.504555] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.504595] TCP reno registered
[ 0.504718] NET: Registered protocol family 1
[ 0.505517] audit: initializing netlink socket (disabled)
[ 0.505566] type=2000 audit(1237721124.503:1): initialized
[ 0.505732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.505825] VFS: Disk quotas dquot_6.5.2
[ 0.505893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.506088] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.506270] msgmni has been set to 873
[ 0.506516] alg: No test for stdrng (krng)
[ 0.506627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.506688] Switched to high resolution mode on CPU 0
[ 0.506696] io scheduler noop registered
[ 0.506733] io scheduler anticipatory registered
[ 0.506771] io scheduler deadline registered
[ 0.506821] io scheduler cfq registered (default)
[ 0.506894] pci 0000:00:05.0: Boot video device
[ 0.520094] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.520184] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.520276] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.520694] isapnp: Scanning for PnP cards...
[ 0.876405] isapnp: No Plug & Play device found
[ 0.879223] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.879404] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.879906] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.881556] brd: module loaded
[ 0.881595] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 0.881635] Copyright (c) 1999-2006 Intel Corporation.
[ 0.881722] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 0.881762] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.881844] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
[ 0.881884] Copyright (c) 2008 Intel Corporation.
[ 0.882195] pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
[ 0.882268] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 0.882308] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.882386] ThunderLAN driver v1.15a
[ 0.882458] TLAN: 0 devices installed, PCI: 0 EISA: 0
[ 0.882768] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 0.882995] sky2 driver version 1.22
[ 0.883546] cs89x0:cs89x0_probe(0x0)
[ 0.883585] PP_addr at 300[a]: 0xffff
[ 0.883589] eth0: incorrect signature at 300[c]: 0xffff!=0x630E
[ 0.883593] PP_addr at 320[a]: 0xffff
[ 0.883597] eth0: incorrect signature at 320[c]: 0xffff!=0x630E
[ 0.883600] PP_addr at 340[a]: 0xffff
[ 0.883604] eth0: incorrect signature at 340[c]: 0xffff!=0x630E
[ 0.883608] PP_addr at 360[a]: 0xffff
[ 0.883612] eth0: incorrect signature at 360[c]: 0xffff!=0x630E
[ 0.883616] PP_addr at 200[a]: 0xffff
[ 0.883620] eth0: incorrect signature at 200[c]: 0xffff!=0x630E
[ 0.883624] PP_addr at 220[a]: 0xffff
[ 0.883628] eth0: incorrect signature at 220[c]: 0xffff!=0x630E
[ 0.883631] PP_addr at 240[a]: 0xffff
[ 0.883635] eth0: incorrect signature at 240[c]: 0xffff!=0x630E
[ 0.883639] PP_addr at 260[a]: 0xffff
[ 0.883643] eth0: incorrect signature at 260[c]: 0xffff!=0x630E
[ 0.883647] PP_addr at 280[a]: 0xffff
[ 0.883651] eth0: incorrect signature at 280[c]: 0xffff!=0x630E
[ 0.883655] PP_addr at 2a0[a]: 0xffff
[ 0.883659] eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E
[ 0.883662] PP_addr at 2c0[a]: 0xffff
[ 0.883666] eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E
[ 0.883670] PP_addr at 2e0[a]: 0xffff
[ 0.883674] eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E
[ 0.883677] cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
[ 0.884868] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
[ 0.885470] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.885521] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.885574] forcedeth 0000:00:14.0: setting latency timer to 64
[ 0.885620] nv_probe: set workaround bit for reversed mac addr
[ 1.400571] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 11, addr 00:18:f3:6b:87:37
[ 1.400626] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
[ 1.406120] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
[ 1.406821] eth%d: i82596 initialization timed out
[ 1.407118] PNP: No PS/2 controller found. Probing ports directly.
[ 1.410028] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.410070] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.410267] mice: PS/2 mouse device common for all mice
[ 1.410392] rtc_cmos 00:04: RTC can wake from S4
[ 1.410502] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.410572] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.410644] cpuidle: using governor ladder
[ 1.410682] cpuidle: using governor menu
[ 1.410722] No iBFT detected.
[ 1.411194] TCP cubic registered
[ 1.411232] NET: Registered protocol family 17
[ 1.411373] RPC: Registered udp transport module.
[ 1.411411] RPC: Registered tcp transport module.
[ 1.411463] Using IPI No-Shortcut mode
[ 1.411641] registered taskstats version 1
[ 1.411846] rtc_cmos 00:04: setting system clock to 2009-03-22 11:25:26 UTC (1237721126)
[ 1.914000] eth0: no link during initialization.
[ 2.916689] Sending DHCP requests .<6>eth0: link up.
[ 5.483348] ., OK
[ 5.490048] IP-Config: Got DHCP answer from 192.168.1.200, my address is 192.168.1.113
[ 5.492980] IP-Config: Complete:
[ 5.493007] device=eth0, addr=192.168.1.113, mask=255.255.255.0, gw=192.168.1.1,
[ 5.493147] host=fernseh02, domain=example.org, nis-domain=(none),
[ 5.493209] bootserver=192.168.1.200, rootserver=192.168.1.200, rootpath=
[ 5.493425] Looking up port of RPC 100003/2 on 192.168.1.200
[ 5.497240] Looking up port of RPC 100005/1 on 192.168.1.200
[ 5.501365] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 5.501710] Freeing unused kernel memory: 388k freed
[ 5.502277] Warning: unable to open an initial console.
[ 18.380297] input: Power Button (FF) as /class/input/input0
[ 18.380363] ACPI: Power Button (FF) [PWRF]
[ 18.380479] input: Power Button (CM) as /class/input/input1
[ 18.380521] ACPI: Power Button (CM) [PWRB]
[ 18.501599] processor ACPI_CPU:00: registered as cooling_device0
[ 18.593976] thermal LNXTHERM:01: registered as thermal_zone0
[ 18.596125] ACPI: Thermal Zone [THRM] (40 C)
[ 18.725406] parport_pc 00:08: reported by Plug and Play ACPI
[ 18.725476] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 18.962227] fan PNP0C0B:00: registered as cooling_device1
[ 18.962275] ACPI: Fan [FAN] (on)
[ 19.473530] usbcore: registered new interface driver usbfs
[ 19.473606] usbcore: registered new interface driver hub
[ 19.490155] usbcore: registered new device driver usb
[ 19.556346] ACPI: I/O resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05]
[ 19.556402] ACPI: Device needs an ACPI driver
[ 19.556475] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 19.556533] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 19.663528] Uniform Multi-Platform E-IDE driver
[ 19.808238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.808878] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 19.808929] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 19.809060] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 19.809064] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 19.809161] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 19.809237] ehci_hcd 0000:00:0b.1: debug port 1
[ 19.809277] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 19.809300] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
[ 19.816696] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 19.816777] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.816818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.816868] usb usb1: Product: EHCI Host Controller
[ 19.816906] usb usb1: Manufacturer: Linux 2.6.29-rc8 ehci_hcd
[ 19.816944] usb usb1: SerialNumber: 0000:00:0b.1
[ 19.817059] usb usb1: configuration #1 chosen from 1 choice
[ 19.817130] hub 1-0:1.0: USB hub found
[ 19.817176] hub 1-0:1.0: 8 ports detected
[ 19.913570] input: PC Speaker as /class/input/input2
[ 19.925377] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 20.153361] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 20.159835] SCSI subsystem initialized
[ 20.182665] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 20.182719] ohci1394 0000:01:03.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 20.215089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.215702] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 20.215752] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[ 20.215828] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 20.215832] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 20.215914] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 20.215993] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000
[ 20.238764] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.268720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.268765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.268815] usb usb2: Product: OHCI Host Controller
[ 20.268853] usb usb2: Manufacturer: Linux 2.6.29-rc8 ohci_hcd
[ 20.268891] usb usb2: SerialNumber: 0000:00:0b.0
[ 20.269015] usb usb2: configuration #1 chosen from 1 choice
[ 20.269086] hub 2-0:1.0: USB hub found
[ 20.269133] hub 2-0:1.0: 8 ports detected
[ 20.269323] amd74xx 0000:00:0d.0: UDMA133 controller
[ 20.269363] amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
[ 20.269419] amd74xx 0000:00:0d.0: IDE port disabled
[ 20.269463] amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
[ 20.269507] ide0: BM-DMA at 0xf400-0xf407
[ 20.269549] Probing IDE interface ide0...
[ 20.324113] libata version 3.00 loaded.
[ 20.395791] usb 1-7: New USB device found, idVendor=0424, idProduct=2228
[ 20.395842] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 20.395883] usb 1-7: Product: Flash Card Reader
[ 20.395921] usb 1-7: Manufacturer: ASUS
[ 20.395957] usb 1-7: SerialNumber: 000022272228
[ 20.396097] usb 1-7: configuration #1 chosen from 1 choice
[ 20.575669] Initializing USB Mass Storage driver...
[ 20.577169] scsi0 : SCSI emulation for USB Mass Storage devices
[ 20.577543] usbcore: registered new interface driver usb-storage
[ 20.577585] USB Mass Storage support registered.
[ 20.578823] usb-storage: device found at 2
[ 20.578827] usb-storage: waiting for device to settle before scanning
[ 20.970130] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
[ 21.510137] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e59423]
[ 21.610070] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 21.610198] hda: UDMA/33 mode selected
[ 21.610410] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.623950] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 21.624002] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 21.624148] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 22.223777] sata_nv 0000:00:0e.0: version 3.5
[ 22.224324] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 22.224369] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 22.224420] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 22.224530] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 22.227847] scsi1 : sata_nv
[ 22.228139] scsi2 : sata_nv
[ 22.228474] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 22.228517] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 22.343668] ide-cd driver 5.00
[ 22.344219] ide-cd: hda: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 22.344379] Uniform CD-ROM driver Revision: 3.20
[ 22.963985] ata1: SATA link down (SStatus 0 SControl 300)
[ 23.693906] ata2: SATA link down (SStatus 0 SControl 300)
[ 25.135788] loop: module loaded
[ 25.179310] Linux agpgart interface v0.103
[ 25.249491] [drm] Initialized drm 1.1.0 20060810
[ 25.582321] usb-storage: device scan complete
[ 25.586896] scsi 0:0:0:0: Direct-Access ASUS Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 25.590129] scsi 0:0:0:1: Direct-Access ASUS Flash HS-COMBO 3.95 PQ: 0 ANSI: 0
[ 25.668026] Driver 'sd' needs updating - please use bus_type methods
[ 25.672510] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 25.700781] fuse init (API version 7.11)
[ 25.723785] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 26.691138] NET: Registered protocol family 10
[ 26.691801] lo: Disabled Privacy Extensions
[ 28.639908] powernow-k8: Power state transitions not supported
[ 31.870647] Bluetooth: Core ver 2.14
[ 31.876719] NET: Registered protocol family 31
[ 31.876761] Bluetooth: HCI device and connection manager initialized
[ 31.876803] Bluetooth: HCI socket layer initialized
[ 31.994299] Bluetooth: L2CAP ver 2.11
[ 31.994340] Bluetooth: L2CAP socket layer initialized
[ 32.031410] Bluetooth: RFCOMM socket layer initialized
[ 32.031463] Bluetooth: RFCOMM TTY layer initialized
[ 32.031519] Bluetooth: RFCOMM ver 1.10
[ 32.859288] lirc_dev: IR Remote Control driver registered, major 61
[ 33.786692] lirc_serial: auto-detected active low receiver
[ 33.786728] lirc_dev: lirc_register_driver: sample_rate: 0
[ 33.786813] lirc_serial $Revision: 5.104 $ registered
[ 37.236682] eth0: no IPv6 routers present
[ 260.152062] nvidia: module license 'NVIDIA' taints kernel.
[ 260.411925] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 260.411941] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 260.411948] nvidia 0000:00:05.0: setting latency timer to 64
[ 260.413884] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
[ 684.184489] lirc_serial: ignoring spike: 1 1 49c622d1 49c622d1 69ecf 69eab
[ 684.654347] nvidia 0000:00:05.0: setting latency timer to 64
[ 684.656216] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
[ 684.659198] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1688.259859] nfs: server 192.168.1.200 not responding, still trying
[ 1748.259854] nfs: server 192.168.1.200 not responding, still trying
[ 1748.260220] nfs: server 192.168.1.200 OK
[ 1748.260542] nfs: server 192.168.1.200 OK
[ 5482.789523] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 5482.991888] usb 2-2: New USB device found, idVendor=1a34, idProduct=0801
[ 5482.991894] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5482.991897] usb 2-2: Product: RF USB GAMEPAD 8206
[ 5482.991900] usb 2-2: Manufacturer: ACRUX
[ 5482.997526] usb 2-2: configuration #1 chosen from 1 choice
[ 5483.291708] usbcore: registered new interface driver hiddev
[ 5483.307012] input: ACRUX RF USB GAMEPAD 8206 as /class/input/input3
[ 5483.307097] generic-usb 0003:1A34:0801.0001: input,hidraw0: USB HID v1.00 Joystick [ACRUX RF USB GAMEPAD 8206] on usb-0000:00:0b.0-2/input0
[ 5483.307119] usbcore: registered new interface driver usbhid
[ 5483.307124] usbhid: v2.6:USB HID core driver
[ 5681.891783] usb 2-2: USB disconnect, address 2
[ 5688.259503] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 5688.461862] usb 2-2: New USB device found, idVendor=1a34, idProduct=0801
[ 5688.461868] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5688.461871] usb 2-2: Product: RF USB GAMEPAD 8206
[ 5688.461874] usb 2-2: Manufacturer: ACRUX
[ 5688.467488] usb 2-2: configuration #1 chosen from 1 choice
[ 5688.487233] input: ACRUX RF USB GAMEPAD 8206 as /class/input/input4
[ 5688.501156] generic-usb 0003:1A34:0801.0002: input,hidraw0: USB HID v1.00 Joystick [ACRUX RF USB GAMEPAD 8206] on usb-0000:00:0b.0-2/input0
[ 5765.820500] usb 2-2: USB disconnect, address 3
[ 5785.546189] usb 2-2: new low speed USB device using ohci_hcd and address 4
[ 5785.751504] usb 2-2: New USB device found, idVendor=1a34, idProduct=0801
[ 5785.751512] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5785.751516] usb 2-2: Product: RF USB GAMEPAD 8206
[ 5785.751518] usb 2-2: Manufacturer: ACRUX
[ 5785.758113] usb 2-2: configuration #1 chosen from 1 choice
[ 5785.776637] input: ACRUX RF USB GAMEPAD 8206 as /class/input/input5
[ 5785.776754] generic-usb 0003:1A34:0801.0003: input,hidraw0: USB HID v1.00 Joystick [ACRUX RF USB GAMEPAD 8206] on usb-0000:00:0b.0-2/input0
c4c74440 1129630346 S Ci:2:001:0 s a3 00 0000 0001 0004 4 <
c4c74440 1129630483 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630499 S Ci:2:001:0 s a3 00 0000 0002 0004 4 <
c4c74440 1129630510 C Ci:2:001:0 0 4 = 01030100
c4c74440 1129630518 S Co:2:001:0 s 23 01 0010 0002 0000 0
c4c74440 1129630527 C Co:2:001:0 0 0
c4c74440 1129630535 S Ci:2:001:0 s a3 00 0000 0003 0004 4 <
c4c74440 1129630544 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630553 S Ci:2:001:0 s a3 00 0000 0004 0004 4 <
c4c74440 1129630562 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630571 S Ci:2:001:0 s a3 00 0000 0005 0004 4 <
c4c74440 1129630580 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630589 S Ci:2:001:0 s a3 00 0000 0006 0004 4 <
c4c74440 1129630598 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630606 S Ci:2:001:0 s a3 00 0000 0007 0004 4 <
c4c74440 1129630615 C Ci:2:001:0 0 4 = 00010000
c4c74440 1129630624 S Ci:2:001:0 s a3 00 0000 0008 0004 4 <
c4c74440 1129630633 C Ci:2:001:0 0 4 = 00010000
db3161c0 1129733638 S Ii:2:001:1 -115:128 2 <
c4c74440 1129733726 S Ci:2:001:0 s a3 00 0000 0002 0004 4 <
c4c74440 1129733741 C Ci:2:001:0 0 4 = 01030000
c4c74440 1129733766 S Co:2:001:0 s 23 03 0004 0002 0000 0
db3161c0 1129744013 C Ii:2:001:1 0:128 2 = 0400
db3161c0 1129744033 S Ii:2:001:1 -115:128 2 <
c4c74440 1129786971 C Co:2:001:0 0 0
c4c74440 1129840340 S Ci:2:001:0 s a3 00 0000 0002 0004 4 <
c4c74440 1129840422 C Ci:2:001:0 0 4 = 03031000
db3161c0 1129846966 C Ii:2:001:1 0:128 2 = 0400
db3161c0 1129846982 S Ii:2:001:1 -115:128 2 <
c4c74440 1129893632 S Co:2:001:0 s 23 01 0014 0002 0000 0
c4c74440 1129893674 C Co:2:001:0 0 0
c4c74440 1129893695 S Ci:2:000:0 s 80 06 0100 0000 0040 64 <
c4c74440 1129895998 C Ci:2:000:0 0 18 = 12011001 00000008 341a0108 02010102 0001
c4c74440 1129896134 S Co:2:001:0 s 23 03 0004 0002 0000 0
c4c74440 1129950297 C Co:2:001:0 0 0
c4c74440 1130003621 S Ci:2:001:0 s a3 00 0000 0002 0004 4 <
c4c74440 1130003661 C Ci:2:001:0 0 4 = 03031000
c4c74440 1130056973 S Co:2:001:0 s 23 01 0014 0002 0000 0
c4c74440 1130057045 C Co:2:001:0 0 0
c4c74440 1130057060 S Co:2:000:0 s 00 05 0004 0000 0000 0
c4c74440 1130058981 C Co:2:000:0 0 0
c4c74440 1130073621 S Ci:2:004:0 s 80 06 0100 0000 0012 18 <
c4c74440 1130075982 C Ci:2:004:0 0 18 = 12011001 00000008 341a0108 02010102 0001
c4c74440 1130076046 S Ci:2:004:0 s 80 06 0200 0000 0009 9 <
c4c74440 1130079998 C Ci:2:004:0 0 9 = 09022200 01010080 af
c4c74440 1130080096 S Ci:2:004:0 s 80 06 0200 0000 0022 34 <
c4c74440 1130085979 C Ci:2:004:0 0 34 = 09022200 01010080 af090400 00010300 00000921 00012101 226a0007 05810308
c4c74440 1130086011 S Ci:2:004:0 s 80 06 0300 0000 00ff 255 <
c4c74440 1130088972 C Ci:2:004:0 0 4 = 04030904
c4c74440 1130088989 S Ci:2:004:0 s 80 06 0302 0409 00ff 255 <
c4c74440 1130095003 C Ci:2:004:0 0 40 = 28035200 46002000 55005300 42002000 47004100 4d004500 50004100 44002000
c4c74440 1130095113 S Ci:2:004:0 s 80 06 0301 0409 00ff 255 <
c4c74440 1130098979 C Ci:2:004:0 0 12 = 0c034100 43005200 55005800
c8a5b640 1130105622 S Co:2:004:0 s 00 09 0001 0000 0000 0
c8a5b640 1130106993 C Co:2:004:0 0 0
c4c74e40 1130108152 S Co:2:004:0 s 21 0a 0000 0000 0000 0
c4c74e40 1130109982 C Co:2:004:0 0 0
c4c74e40 1130111551 S Ci:2:004:0 s 81 06 2200 0000 006a 106 <
c4c74e40 1130120984 C Ci:2:004:0 0 106 = 05010904 a1010901 a1000932 09350930 09310936 150026ff 00750895 058102c0
da2342c0 1130122255 S Ci:2:004:0 s a1 01 0100 0000 0007 8 <
da2342c0 1130123981 C Ci:2:004:0 -32 0
c4c74640 1130124378 S Ci:2:001:0 s a3 00 0000 0002 0004 4 <
c4c74640 1130124394 C Ci:2:001:0 0 4 = 03030000
