From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> This patch (as1208) converts usb-storage's isd200 subdriver into a separate module. Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/isd200.c | 94 ++++++++++++++++++++++++++++++++- drivers/usb/storage/isd200.h | 31 ----------- drivers/usb/storage/unusual_devs.h | 42 --------------- drivers/usb/storage/unusual_isd200.h | 57 ++++++++++++++++++++ drivers/usb/storage/usb.c | 10 ---- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 154 insertions(+), 88 deletions(-) delete mode 100644 drivers/usb/storage/isd200.h create mode 100644 drivers/usb/storage/unusual_isd200.h diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 7be8899..fc356a7 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -46,7 +46,7 @@ config USB_STORAGE_FREECOM Freecom has a web page at <http://www.freecom.de/>. config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based @@ -61,6 +61,8 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + If this driver is compiled as a module, it will be named ums-isd200. + config USB_STORAGE_USBAT bool "USBAT/USBAT02-based storage support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index a52740a..b47f94e 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -13,7 +13,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o @@ -30,6 +29,8 @@ else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif +obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o +ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 383abf2..df94300 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -44,6 +44,7 @@ #include <linux/jiffies.h> #include <linux/errno.h> +#include <linux/module.h> #include <linux/slab.h> #include <linux/hdreg.h> #include <linux/scatterlist.h> @@ -57,7 +58,50 @@ #include "protocol.h" #include "debug.h" #include "scsiglue.h" -#include "isd200.h" + + +static int isd200_Initialization(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id isd200_usb_ids[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, isd200_usb_ids); + +#undef UNUSUAL_DEV +#undef USUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev isd200_unusual_dev_list[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV +#undef USUAL_DEV /* Timeout defines (in Seconds) */ @@ -1518,7 +1562,7 @@ static int isd200_init_info(struct us_data *us) * Initialization for the ISD200 */ -int isd200_Initialization(struct us_data *us) +static int isd200_Initialization(struct us_data *us) { US_DEBUGP("ISD200 Initialization...\n"); @@ -1549,7 +1593,7 @@ int isd200_Initialization(struct us_data *us) * */ -void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) +static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { int sendToTransport = 1, orig_bufflen; union ata_cdb ataCdb; @@ -1570,3 +1614,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) isd200_srb_set_bufflen(srb, orig_bufflen); } + +static int isd200_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - isd200_usb_ids) + isd200_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "ISD200 ATA/ATAPI"; + us->proto_handler = isd200_ata_command; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver isd200_driver = { + .name = "ums-isd200", + .probe = isd200_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = isd200_usb_ids, + .soft_unbind = 1, +}; + +static int __init isd200_init(void) +{ + return usb_register(&isd200_driver); +} + +static void __exit isd200_exit(void) +{ + usb_deregister(&isd200_driver); +} + +module_init(isd200_init); +module_exit(isd200_exit); diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/isd200.h deleted file mode 100644 index 0a35f4f..0000000 --- a/drivers/usb/storage/isd200.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Header File for In-System Design, Inc. ISD200 ASIC - * - * First release - * - * Current development and maintenance by: - * (c) 2000 In-System Design, Inc. (support@xxxxxxxxxxxxx) - * - * See isd200.c for more information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_ISD200_H -#define _USB_ISD200_H - -extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us); -extern int isd200_Initialization(struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1fe7062..83ce1d3 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -632,14 +632,6 @@ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, - "Sony", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Olaf Hering, <olh@xxxxxxx> SuSE Bugzilla #49049 */ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, "Sony", @@ -785,32 +777,6 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, US_SC_SCSI, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, - "In-System", - "USB/IDE Bridge (ATA/ATAPI)", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, - "In-System", - "USB Storage Adapter V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Sven Anderson <sven-linux@xxxxxxxxxxx> * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears @@ -1375,14 +1341,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SANE_SENSE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, - "ATI", - "USB Cable 205", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, "Acomdata", diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h new file mode 100644 index 0000000..0d99dde --- /dev/null +++ b/drivers/usb/storage/unusual_isd200.h @@ -0,0 +1,57 @@ +/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ISD200) || \ + defined(CONFIG_USB_STORAGE_ISD200_MODULE) + +UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, + "Sony", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, + "In-System", + "USB/IDE Bridge (ATA/ATAPI)", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, + "In-System", + "USB Storage Adapter V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, + "ATI", + "USB Cable 205", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 33cce41..e65cbba 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -75,9 +75,6 @@ #ifdef CONFIG_USB_STORAGE_FREECOM #include "freecom.h" #endif -#ifdef CONFIG_USB_STORAGE_ISD200 -#include "isd200.h" -#endif #ifdef CONFIG_USB_STORAGE_DATAFAB #include "datafab.h" #endif @@ -721,13 +718,6 @@ static void get_protocol(struct us_data *us) us->proto_handler = usb_stor_ufi_command; break; -#ifdef CONFIG_USB_STORAGE_ISD200 - case US_SC_ISD200: - us->protocol_name = "ISD200 ATA/ATAPI"; - us->proto_handler = isd200_ata_command; - break; -#endif - #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB case US_SC_CYP_ATACB: us->protocol_name = "Transparent SCSI with Cypress ATACB"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index f808c52..61ebddc 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_isd200.h" # include "unusual_sddr09.h" { } /* Terminating entry */ }; -- 1.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
