PATCH [UPDATED] [1/3] drivers/input/xpad.c: Improve Xbox 360 wireless support and add sysfs interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Improved support for Xbox 360 wireless devices by enabling rumble and
LED control, improved general usability by adding input controls, and
added a sysfs interface for tuning driver behavior. Updated with fixes
to code layout, typecasting, and use of internal functions.

Signed-off-by: Mike Murphy <mamurph[at]cs.clemson.edu>
diff -uNr origdrv/drivers/input/joystick/xpad.c newdrv/drivers/input/joystick/xpad.c
--- origdrv/drivers/input/joystick/xpad.c	2009-02-14 22:39:20.000000000 -0500
+++ newdrv/drivers/input/joystick/xpad.c	2009-03-02 23:05:19.000000000 -0500
@@ -1,5 +1,8 @@
 /*
- * X-Box gamepad driver
+ * Xbox gamepad driver with Xbox 360 wired/wireless support
+ *
+ * Last Modified:	2 March 2009
+ *			Mike Murphy <mamurph@xxxxxxxxxxxxxx>
  *
  * Copyright (c) 2002 Marko Friedemann <mfr@xxxxxxxxxxxxxxx>
  *               2004 Oliver Schwartz <Oliver.Schwartz@xxxxxx>,
@@ -9,6 +12,8 @@
  *               2005 Dominic Cerquetti <binary1230@xxxxxxxxx>
  *               2006 Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
  *               2007 Jan Kratochvil <honza@xxxxxxxx>
+ *               2009 Clemson University
+ *		      (contact: Mike Murphy <mamurph@xxxxxxxxxxxxxx>)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -24,130 +29,118 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
- *
- * This driver is based on:
- *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
- *  - the iForce driver    drivers/char/joystick/iforce.c
- *  - the skeleton-driver  drivers/usb/usb-skeleton.c
- *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
- *
- * Thanks to:
- *  - ITO Takayuki for providing essential xpad information on his website
- *  - Vojtech Pavlik     - iforce driver / input subsystem
- *  - Greg Kroah-Hartman - usb-skeleton driver
- *  - XBOX Linux project - extra USB id's
- *
- * TODO:
- *  - fine tune axes (especially trigger axes)
- *  - fix "analog" buttons (reported as digital now)
- *  - get rumble working
- *  - need USB IDs for other dance pads
- *
- * History:
- *
- * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
- *
- * 2002-07-02 - 0.0.2 : basic working version
- *  - all axes and 9 of the 10 buttons work (german InterAct device)
- *  - the black button does not work
- *
- * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
- *  - indentation fixes
- *  - usb + input init sequence fixes
- *
- * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
- *  - verified the lack of HID and report descriptors
- *  - verified that ALL buttons WORK
- *  - fixed d-pad to axes mapping
- *
- * 2002-07-17 - 0.0.5 : simplified d-pad handling
- *
- * 2004-10-02 - 0.0.6 : DDR pad support
- *  - borrowed from the XBOX linux kernel
- *  - USB id's for commonly used dance pads are present
- *  - dance pads will map D-PAD to buttons, not axes
- *  - pass the module paramater 'dpad_to_buttons' to force
- *    the D-PAD to map to buttons if your pad is not detected
- *
- * Later changes can be tracked in SCM.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/module.h>
-#include <linux/usb/input.h>
-
-#define DRIVER_AUTHOR "Marko Friedemann <mfr@xxxxxxxxxxxxxxx>"
-#define DRIVER_DESC "X-Box pad driver"
-
-#define XPAD_PKT_LEN 32
-
-/* xbox d-pads should map to buttons, as is required for DDR pads
-   but we map them to axes when possible to simplify things */
-#define MAP_DPAD_TO_BUTTONS    0
-#define MAP_DPAD_TO_AXES       1
-#define MAP_DPAD_UNKNOWN       2
-
-#define XTYPE_XBOX        0
-#define XTYPE_XBOX360     1
-#define XTYPE_XBOX360W    2
-#define XTYPE_UNKNOWN     3
+ * Please see xbox.h for the ChangeLog.
+ */
+
+#include "xpad.h"
 
+/* This module parameter is something of a relic, but it remains for
+ * compatibility. Importantly, the option to map the D-PAD buttons applies
+ * only to controller *interfaces* (i.e. vendor and product codes) not
+ * explicitly present in xpad_device[]. */
 static int dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);
-MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
+MODULE_PARM_DESC(dpad_to_buttons,
+	"Map D-PAD to buttons rather than axes for unknown pads");
 
+
+/* Table of various device interfaces recognized by this driver. Each supported
+ * device has a directional pad mapping, interface type, and controller type.
+ * Note that wireless 360 devices have XCONTROLLER_TYPE_NONE, as the actual
+ * type of the gaming controller is not known until the controller binds
+ * wirelessly with the receiver
+ */
 static const struct xpad_device {
 	u16 idVendor;
 	u16 idProduct;
 	char *name;
 	u8 dpad_mapping;
 	u8 xtype;
+	u8 controller_type;
 } xpad_device[] = {
-	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
-	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
-	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
-	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
+	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS,
+		XTYPE_XBOX360W, XCONTROLLER_TYPE_NONE },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS,
+		XTYPE_XBOX, XCONTROLLER_TYPE_DANCE_PAD },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x046d, 0xc242, "Logitech Chillstream Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX360, XCONTROLLER_TYPE_PAD },
+	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX,
+		XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX,
+		XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX,
+		XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX,
+		XCONTROLLER_TYPE_DANCE_PAD },
+	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX360, XCONTROLLER_TYPE_PAD },
+	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS,
+		XTYPE_XBOX, XCONTROLLER_TYPE_DANCE_PAD },
+	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX360, XCONTROLLER_TYPE_PAD },
+	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller",
+		MAP_DPAD_TO_AXES, XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX,
+		XCONTROLLER_TYPE_DANCE_PAD },
+	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX360, XCONTROLLER_TYPE_GUITAR },
+	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)",
+		MAP_DPAD_TO_BUTTONS, XTYPE_XBOX, XCONTROLLER_TYPE_DANCE_PAD },
+	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX360, XCONTROLLER_TYPE_PAD },
+	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES,
+		XTYPE_XBOX, XCONTROLLER_TYPE_PAD },
+	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN,
+		XCONTROLLER_TYPE_PAD }
 };
 
+
 /* buttons shared with xbox and xbox360 */
 static const signed short xpad_common_btn[] = {
 	BTN_A, BTN_B, BTN_X, BTN_Y,			/* "analog" buttons */
@@ -168,12 +161,14 @@
 	-1				/* terminating entry */
 };
 
-static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
+/* buttons for x360 controller */
+static const signed short xpad360_btn[] = {
 	BTN_TL, BTN_TR,		/* Button LB/RB */
 	BTN_MODE,		/* The big X button */
 	-1
 };
 
+/* sticks and triggers common to all devices */
 static const signed short xpad_abs[] = {
 	ABS_X, ABS_Y,		/* left stick */
 	ABS_RX, ABS_RY,		/* right stick */
@@ -187,61 +182,349 @@
 	-1			/* terminating entry */
 };
 
-/* Xbox 360 has a vendor-specific class, so we cannot match it with only
- * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
- * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
- * wireless controllers have protocol 129. */
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
-	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
-	.idVendor = (vend), \
-	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
-	.bInterfaceSubClass = 93, \
-	.bInterfaceProtocol = (pr)
-#define XPAD_XBOX360_VENDOR(vend) \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
-
-static struct usb_device_id xpad_table [] = {
-	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
-	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
-	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
-	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
-	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
-	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
+static struct usb_device_id xpad_table[] = {
+		/* X-Box USB-IF not approved class */
+	{ USB_INTERFACE_INFO('X', 'B', 0) },
+	XPAD_XBOX360_VENDOR(0x045e),	/* Microsoft X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x046d),	/* Logitech 360 style controllers */
+	XPAD_XBOX360_VENDOR(0x0738),	/* Mad Catz X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x0e6f),	/* 0x0e6f X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x1430),	/* RedOctane X-Box 360 controllers */
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, xpad_table);
+MODULE_DEVICE_TABLE(usb, xpad_table);
 
-struct usb_xpad {
-	struct input_dev *dev;		/* input device interface */
-	struct usb_device *udev;	/* usb device */
+static struct usb_driver xpad_driver = {
+	.name		= "xpad",
+	.probe		= xpad_probe,
+	.disconnect	= xpad_disconnect,
+	.id_table	= xpad_table,
+};
 
-	int pad_present;
 
-	struct urb *irq_in;		/* urb for interrupt in report */
-	unsigned char *idata;		/* input data */
-	dma_addr_t idata_dma;
+/* Wireless 360 device identification.
+ *
+ * When a wireless controller connects, the 2nd packet it sends SEEMS to
+ * be some kind of unique controller identification message. Using usbmon
+ * (see Documentation/usb/usbmon.txt), I tried 4 gamepads and a guitar, and
+ * I collected the following 5 ID packets from the 5 devices:
+ *
+ * 000f00f0 00ccfd27 0060e226 63700010 13e3201d 30034001 5001ffff ff
+ * 000f00f0 f0ccfd27 0060d8c4 e9600009 13e7201d 30034001 5001ffff ff
+ * 000f00f0 00ccfd27 0060578b 82f00010 13e3201d 30034001 5001ffff ff
+ * 000f00f0 f0ccfd27 0060da1c b1500009 13e7201d 30034001 5001ffff ff
+ * 000f00f0 f0ccfd27 006002d1 71d10000 13e3201d 30034430 5107ffff ff
+ *
+ * From this trace data, I concocted the following (potentially incorrect)
+ * scheme for detecting type and unique ID:
+ *
+ * ******** xx****xx xxxxxxxx xxxx**xx **xx**** ****tttt tttt**** **
+ *                |  unique id |                    |  type |
+ *
+ * It appears that some of the bytes in the first half of the message, noted
+ * above as "unique id" are some sort of serial number, though I cannot work
+ * out any correspondence between these bytes and the serial number printed
+ * under the battery pack. Many of the bytes in this possibly unique field
+ * are not unique across my controllers, and may not in fact be part of the
+ * controller's unique identification, but I figured it was better to have
+ * extra bytes on either end of the unique byte string instead of the
+ * alternative. In addition, the packet appears to indicate the type of
+ * the controller toward the end: the pads all send 4001 5001, while the
+ * guitar sends 4430 5107.
+ *
+ * Further testing over a wider variety of devices is probably needed to
+ * determine if changes need to be made to this scheme.
+ */
+static const struct w360_id {
+	unsigned char id_bytes[4];
+	u8 controller_type;
+} w360_id[] = {
+	{ {0x40, 0x01, 0x50, 0x01}, XCONTROLLER_TYPE_PAD },
+	{ {0x44, 0x30, 0x51, 0x07}, XCONTROLLER_TYPE_GUITAR },
+	{ {0x00, 0x00, 0x00, 0x00}, XCONTROLLER_TYPE_NONE }
+};
 
-	struct urb *bulk_out;
-	unsigned char *bdata;
 
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
-	struct urb *irq_out;		/* urb for interrupt out report */
-	unsigned char *odata;		/* output data */
-	dma_addr_t odata_dma;
-	struct mutex odata_mutex;
-#endif
+/* The dead zone and stick limit both affect the behavior of the corresponding
+ * analog stick, since the output values reported for the stick inputs will
+ * be scaled onto [0,32767]. It is thus necessary to ensure that the dead zone
+ * is never larger than the stick limit. In fact, a minimal amount of stick
+ * travel space (1024) is maintained between the two values. In practice,
+ * however, the stick limit should always be much greater than the dead zone.
+ */
 
-#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
-	struct xpad_led *led;
-#endif
+static void set_dead_zone(unsigned int new_size, unsigned int *dz,
+		unsigned int stick_limit)
+{
+	*dz = min(new_size, stick_limit - 1024);
+}
 
-	char phys[64];			/* physical device path */
+static void set_stick_limit(unsigned int new_size, unsigned int *sl,
+		unsigned int dead_zone)
+{
+	*sl = min(max(new_size, dead_zone + 1024), 32767u);
+}
+
+
+/****************************************************************************/
+/*
+ * SysFs interface functions
+ *
+ * We use common functions, where possible, to implement the show/store
+ * routines. This design saves on code and reduces the burden of adding to or
+ * changing the interface.
+ */
+
+
+static ssize_t xpad_show_uint(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct usb_xpad *xpad = to_xpad(dev);
+	unsigned int value;
+	if (attr == &dev_attr_left_dead_zone)
+		value = xpad->left_dead_zone;
+	else if (attr == &dev_attr_right_dead_zone)
+		value = xpad->right_dead_zone;
+	else if (attr == &dev_attr_left_stick_limit)
+		value = xpad->left_stick_limit;
+	else if (attr == &dev_attr_right_stick_limit)
+		value = xpad->right_stick_limit;
+	else
+		return -EIO;
+	return snprintf(buf, PAGE_SIZE, "%u\n", value);
+}
+
+
+static ssize_t xpad_store_uint(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_xpad *xpad = to_xpad(dev);
+	unsigned int new_value;
+	if (sscanf(buf, "%u", &new_value) != 1)
+		return -EIO;
+
+	if (attr == &dev_attr_left_dead_zone)
+		set_dead_zone(new_value, &xpad->left_dead_zone,
+				xpad->left_stick_limit);
+	else if (attr == &dev_attr_right_dead_zone)
+		set_dead_zone(new_value, &xpad->right_dead_zone,
+				xpad->right_stick_limit);
+	else if (attr == &dev_attr_left_stick_limit)
+		set_stick_limit(new_value, &xpad->left_stick_limit,
+				xpad->left_dead_zone);
+	else if (attr == &dev_attr_right_stick_limit)
+		set_stick_limit(new_value, &xpad->right_stick_limit,
+				xpad->right_dead_zone);
+	else
+		return -EIO;
+	return strnlen(buf, PAGE_SIZE);
+}
+
+
+static ssize_t xpad_store_bool(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_xpad *xpad = to_xpad(dev);
+	int newvalue;
+	if (sscanf(buf, "%d", &newvalue) != 1)
+		return -EIO;
+	
+	if (attr == &dev_attr_rumble_enable)
+		xpad->rumble_enable = (newvalue) ? 1 : 0;
+	else if (attr == &dev_attr_left_trigger_full_axis)
+		xpad->left_trigger_full_axis = (newvalue) ? 1 : 0;
+	else if (attr == &dev_attr_right_trigger_full_axis)
+		xpad->right_trigger_full_axis = (newvalue) ? 1 : 0;
+	return strnlen(buf, PAGE_SIZE);
+}
+
+
+/* read-only attributes share a common store function that returns an error */
+static ssize_t xpad_store_ro(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	return -EIO;
+}
+
+
+static ssize_t xpad_show_int(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct usb_xpad *xpad = to_xpad(dev);
+	int value;
+	if (attr == &dev_attr_rumble_enable)
+		value = xpad->rumble_enable;
+	else if (attr == &dev_attr_controller_number)
+		value = xpad->controller_number;
+	else if (attr == &dev_attr_controller_present)
+		value = xpad->controller_present;
+	else if (attr == &dev_attr_controller_type)
+		value = xpad->controller_type;
+	else if (attr == &dev_attr_left_trigger_full_axis)
+		value = xpad->left_trigger_full_axis;
+	else if (attr == &dev_attr_right_trigger_full_axis)
+		value = xpad->right_trigger_full_axis;
+	else
+		return -EIO;
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+
+static ssize_t xpad_show_id(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_xpad *xpad = to_xpad(dev);
+	return snprintf(buf, PAGE_SIZE, "%s\n", xpad->controller_unique_id);
+}
+
+
+/* end of sysfs interface */
+/*****************************************************************************/
+
+/* Input section */
+
+/*	xpad_init_controller
+ *
+ *	Performs controller setup based on controller type.
+ *
+ *	NOTE: xpad->controller_data->controller_type needs to be set BEFORE
+ *	calling this function!
+ */
+
+static void xpad_init_controller(struct usb_xpad *xpad)
+{
+	set_stick_limit(XSTICK_LIMIT_DEFAULT, &xpad->left_stick_limit,
+			xpad->left_dead_zone);
+	set_stick_limit(XSTICK_LIMIT_DEFAULT, &xpad->right_stick_limit,
+			xpad->right_dead_zone);
+	set_dead_zone(XDEAD_ZONE_DEFAULT, &xpad->left_dead_zone,
+			xpad->left_stick_limit);
+	set_dead_zone(XDEAD_ZONE_DEFAULT, &xpad->right_dead_zone,
+			xpad->right_stick_limit);
+	xpad->left_trigger_full_axis = XFULL_TRIGGER_AXIS_DEFAULT;
+	xpad->right_trigger_full_axis = XFULL_TRIGGER_AXIS_DEFAULT;
+
+	if (xpad->controller_type == XCONTROLLER_TYPE_GUITAR)
+		xpad->rumble_enable = 0;
+	else if (xpad->controller_type == XCONTROLLER_TYPE_DANCE_PAD)
+		xpad->rumble_enable = 0;
+	else
+		xpad->rumble_enable = 1;
+}
+
+
+/*
+ *	xpad_process_sticks
+ *
+ *	Handles stick input, accounting for dead zones and square axes. Based
+ *	on the original handlers for the Xbox and Xbox 360 in
+ *	xpad_process_packet and xpad360_process_packet, but unified to avoid
+ *	duplication.
+ *
+ *	Whenever a dead zone is used, each axis is scaled so that moving the
+ *	stick slightly out of the dead zone range results in a low axis
+ *	value in jstest(1), while moving the stick to the maximum position
+ *	along any axis still results in 32767.
+ *
+ *	In order to provide the ability to map inputs to a square axis (used
+ *	by older games), the left_stick_limit and right_stick_limit can be
+ *	set. These limits specify at what point in the raw input coordinates
+ *	an axis is reported to be at maximum value (32767 or -32767).
+ *
+ *	Both the dead zone and stick limit algorithms are implemented
+ *	together as a coordinate transformation from "effective coordinates"
+ *	onto the output coordinates (which have absolute values from 0 to
+ *	32767 and are positive or negative based on direction). Effective
+ *	coordinates are defined as those input values that are greater than
+ *	the dead zone but less than the stick limit on the axis in question.
+ *
+ *	DANGER: All denominator values in division operations MUST be checked
+ *	for non-zero condition. Dividing by zero inside the kernel can cause
+ *	a system deadlock.
+ */
+
+static void xpad_process_sticks(struct usb_xpad *xpad, __le16 *data)
+{
+	struct input_dev *dev = xpad->dev;
+	s16 coords[4];    /* x, y, rx, ry */
+	int c;
+	int range;
+	int abs_magnitude, adjusted_magnitude, difference, scale_fraction;
+	int dead_zone[2], stick_limit[2];
+
+	dead_zone[0] = xpad->left_dead_zone;
+	dead_zone[1] = xpad->right_dead_zone;
+	stick_limit[0] = xpad->left_stick_limit;
+	stick_limit[1] = xpad->right_stick_limit;
+
+	/* Stick input data starts at byte 12 (16-bit word 6) for the regular
+	 * Xbox controller, byte 6 (16-bit word 3) for the 360 controllers */
+	data += (xpad->xtype == XTYPE_XBOX) ? 6 : 3;
+
+	coords[0] = le16_to_cpup(data);
+	coords[1] = ~le16_to_cpup(data + 1);
+	coords[2] = le16_to_cpup(data + 2);
+	coords[3] = ~le16_to_cpup(data + 3);
+
+	/* Adjustment for dead zone and square axis */
+	for (c = 0; c < 4; c++) {
+		abs_magnitude = abs(coords[c]);
+		adjusted_magnitude = abs_magnitude;
+
+		range = (stick_limit[c/2] - dead_zone[c/2]);
+
+		if (abs_magnitude >= stick_limit[c/2]) {
+			adjusted_magnitude = 32767;
+		} else if (abs_magnitude <= dead_zone[c/2]) {
+			adjusted_magnitude = 0;
+		} else if (range > 0) {
+			difference = 32767 - range;
+			if (difference) {
+				/* DIVISION: difference non-zero */
+				scale_fraction = range / difference;
+				adjusted_magnitude =
+					abs_magnitude - dead_zone[c/2];
+
+				/* Approximate floating-point division with a
+				 * "catch-up" scaling algorithm that adds back
+				 * to the adjusted_magnitude based on distance
+				 * from the origin (0 in adjusted coordinates).
+				 * If the range / difference is at least 1,
+				 * then 1 needs to be added to the adjusted
+				 * magnitude for every scale_fraction units
+				 * from the origin. If the range / difference
+				 * is less than 1 (0 in integer division),
+				 * then divide the difference by the range to
+				 * obtain the number of units to add per unit
+				 * from the adjusted origin.
+				 */
+				if (scale_fraction) {
+					/* DIVISION: scale_fraction non-zero */
+					adjusted_magnitude +=
+						adjusted_magnitude
+						/ scale_fraction;
+				} else {
+					/* DIVISION: range non-zero */
+					scale_fraction = difference / range;
+					adjusted_magnitude +=
+						adjusted_magnitude
+						* scale_fraction;
+				}
+				if (adjusted_magnitude > 32767)
+					adjusted_magnitude = 32767;
+			}
+		}
+		coords[c] = (coords[c] < 0) ?
+				-adjusted_magnitude : adjusted_magnitude;
+	}
+
+	input_report_abs(dev, ABS_X, coords[0]);
+	input_report_abs(dev, ABS_Y, coords[1]);
+	input_report_abs(dev, ABS_RX, coords[2]);
+	input_report_abs(dev, ABS_RY, coords[3]);
+}
 
-	int dpad_mapping;		/* map d-pad to buttons or to axes */
-	int xtype;			/* type of xbox device */
-};
 
 /*
  *	xpad_process_packet
@@ -253,21 +536,13 @@
  *	 http://euc.jp/periphs/xbox-controller.ja.html
  */
 
-static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd,
+		unsigned char *data)
 {
 	struct input_dev *dev = xpad->dev;
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 12)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 14)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 16)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 18)));
+	/* left and right sticks */
+	xpad_process_sticks(xpad, (__le16 *) data);
 
 	/* triggers left/right */
 	input_report_abs(dev, ABS_Z, data[10]);
@@ -305,6 +580,7 @@
 	input_sync(dev);
 }
 
+
 /*
  *	xpad360_process_packet
  *
@@ -315,10 +591,11 @@
  *		http://www.free60.org/wiki/Gamepad
  */
 
-static void xpad360_process_packet(struct usb_xpad *xpad,
-				   u16 cmd, unsigned char *data)
+static void xpad360_process_packet(struct usb_xpad *xpad, u16 cmd,
+		unsigned char *data)
 {
 	struct input_dev *dev = xpad->dev;
+	int trigger;
 
 	/* digital pad */
 	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
@@ -351,25 +628,78 @@
 	input_report_key(dev, BTN_TR,	data[3] & 0x02);
 	input_report_key(dev, BTN_MODE,	data[3] & 0x04);
 
-	/* left stick */
-	input_report_abs(dev, ABS_X,
-			 (__s16) le16_to_cpup((__le16 *)(data + 6)));
-	input_report_abs(dev, ABS_Y,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 8)));
-
-	/* right stick */
-	input_report_abs(dev, ABS_RX,
-			 (__s16) le16_to_cpup((__le16 *)(data + 10)));
-	input_report_abs(dev, ABS_RY,
-			 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+	/* left and right sticks */
+	xpad_process_sticks(xpad, (__le16 *) data);
 
-	/* triggers left/right */
-	input_report_abs(dev, ABS_Z, data[4]);
-	input_report_abs(dev, ABS_RZ, data[5]);
+	/* triggers left/right: when full_axis is not enabled, report the
+	 * absolute data value (0-255), which will be mapped onto [0,32767].
+	 * If full axis is enabled, map the data value onto [-255:255], so
+	 * that the input subsystem maps it onto [-32767:32767]. */
+	trigger = data[4];
+	if (xpad->left_trigger_full_axis)
+		trigger = (2 * trigger) - 255;
+	input_report_abs(dev, ABS_Z, trigger);
+	trigger = data[5];
+	if (xpad->right_trigger_full_axis)
+		trigger = (2 * trigger) - 255;
+	input_report_abs(dev, ABS_RZ, trigger);
 
 	input_sync(dev);
 }
 
+
+static void xpad360w_identify_controller(struct usb_xpad *xpad)
+{
+	int i;
+	unsigned char *data = xpad->id_packet;
+
+	if (!data)
+		return;
+
+	snprintf(xpad->controller_unique_id, 17,
+		"%02x%02x%02x%02x%02x%02x%02x%02x",
+		data[8], data[9], data[10], data[11], data[12], data[13],
+		data[14], data[15]);
+
+	/* Identify controller type */
+	xpad->controller_type = XCONTROLLER_TYPE_OTHER;
+	for (i = 0; w360_id[i].id_bytes; i++) {
+		if (!memcmp(data + 22, &w360_id[i].id_bytes, 4)) {
+			xpad->controller_type =
+				w360_id[i].controller_type;
+			break;
+		}
+	}
+
+	if (xpad->controller_type == XCONTROLLER_TYPE_OTHER)
+		printk(KERN_INFO "xpad: unknown wireless controller: "
+			"%02x%02x %02x%02x\n", data[22], data[23], data[24],
+			data[25]);
+}
+
+
+/*
+ *	xpad_work_controller
+ *
+ *	Submits command to set pad number on LED display of wireless 360
+ *	controllers, as well as online/offline event. The shared workqueue
+ *      is used for this purpose, so that the interrupt handler is kept short.
+ */
+
+static void xpad_work_controller(struct work_struct *w)
+{
+	struct usb_xpad *xpad = container_of(w, struct usb_xpad, work);
+	if (xpad->controller_present) {
+		xpad360w_identify_controller(xpad);
+		xpad_init_controller(xpad);
+		xpad_send_led_command(xpad, xpad->controller_number + 1);
+		kobject_uevent(&xpad->dev->dev.kobj, KOBJ_ONLINE);
+	} else {
+		kobject_uevent(&xpad->dev->dev.kobj, KOBJ_OFFLINE);
+	}
+}
+
+
 /*
  * xpad360w_process_packet
  *
@@ -379,30 +709,57 @@
  * Byte.Bit
  * 00.1 - Status change: The controller or headset has connected/disconnected
  *                       Bits 01.7 and 01.6 are valid
+ * 01.f - Some kind of unique identifier message (see above)
  * 01.7 - Controller present
  * 01.6 - Headset present
  * 01.1 - Pad state (Bytes 4+) valid
  *
  */
 
-static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd,
+		unsigned char *data)
 {
+	int padnum = 0;
+
 	/* Presence change */
 	if (data[0] & 0x08) {
+		padnum = xpad->controller_number;
 		if (data[1] & 0x80) {
-			xpad->pad_present = 1;
-			usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
-		} else
-			xpad->pad_present = 0;
+			/* ignore duplicates */
+			if (!xpad->controller_present) {
+				xpad->controller_present = 1;
+				/*schedule_work(&xpad->work);*/
+				/* Wait for id packet before setting
+				 * controller type and LEDs */
+			}
+		} else {
+			xpad->controller_present = 0;
+			xpad->controller_unique_id[0] = '\0';
+			xpad->controller_type = XCONTROLLER_TYPE_NONE;
+			/* We do NOT flush the shared workqueue here, because
+			 * this function is called from an interrupt handler.
+			 * If the controller has disconnected from the receiver,
+			 * the worst that will happen from the work task running
+			 * is that a packet will be transmitted from the
+			 * receiver to a non-listening controller
+			 */
+		}
 	}
 
-	/* Valid pad data */
-	if (!(data[1] & 0x1))
-		return;
-
-	xpad360_process_packet(xpad, cmd, &data[4]);
+	/* Process packets according to type */
+	if (data[1] == 0x0f) {
+		if (!xpad->controller_unique_id[0]) {
+			if (xpad->id_packet) {
+				memcpy(xpad->id_packet, data, 29);
+				schedule_work(&xpad->work);
+			}
+		}
+	} else if (data[1] & 0x1) {
+		xpad360_process_packet(xpad, cmd, &data[4]);
+	}
 }
 
+
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -439,30 +796,22 @@
 	}
 
 exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
+		err("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
 }
 
-static void xpad_bulk_out(struct urb *urb)
-{
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
-		break;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
-	}
-}
+
+/* end input section */
+
+/*****************************************************************************/
+/* IRQ output section: present in object code only if the force feedback or
+ * LED interface is enabled.
+ */
 
 #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
+
 static void xpad_irq_out(struct urb *urb)
 {
 	int retval, status;
@@ -470,20 +819,20 @@
 	status = urb->status;
 
 	switch (status) {
-		case 0:
+	case 0:
 		/* success */
 		break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d",
-				__func__, status);
-			return;
-		default:
-			dbg("%s - nonzero urb status received: %d",
-				__func__, status);
-			goto exit;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+			__func__, status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+			__func__, status);
+		goto exit;
 	}
 
 exit:
@@ -493,12 +842,13 @@
 		    __func__, retval);
 }
 
+
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
 	int error = -ENOMEM;
 
-	if (xpad->xtype != XTYPE_XBOX360)
+	if ((xpad->xtype != XTYPE_XBOX360) && (xpad->xtype != XTYPE_XBOX360W))
 		return 0;
 
 	xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
@@ -514,7 +864,8 @@
 
 	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
-			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
+			 usb_sndintpipe(xpad->udev,
+				ep_irq_out->bEndpointAddress),
 			 xpad->odata, XPAD_PKT_LEN,
 			 xpad_irq_out, xpad, ep_irq_out->bInterval);
 	xpad->irq_out->transfer_dma = xpad->odata_dma;
@@ -526,45 +877,82 @@
  fail1:	return error;
 }
 
+
 static void xpad_stop_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360)
+	if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W))
 		usb_kill_urb(xpad->irq_out);
 }
 
+
 static void xpad_deinit_output(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_XBOX360) {
+	if ((xpad->xtype == XTYPE_XBOX360) || (xpad->xtype == XTYPE_XBOX360W)) {
 		usb_free_urb(xpad->irq_out);
 		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->odata, xpad->odata_dma);
 	}
 }
+
 #else
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
+/* Dummy implementations for xpad_probe and xpad_disconnect */
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
+	{ return 0; }
 static void xpad_deinit_output(struct usb_xpad *xpad) {}
 static void xpad_stop_output(struct usb_xpad *xpad) {}
 #endif
 
+/* end output section */
+
+/*****************************************************************************/
+
+/* Force feedback (rumble effect) section, depends on CONFIG_JOYSTICK_XPAD_FF */
+
 #ifdef CONFIG_JOYSTICK_XPAD_FF
+
+/* Rumble support for wireless controllers follows protocol description
+ * from xboxdrv userspace driver:
+ *       http://pingus.seul.org/~grumbel/xboxdrv/
+ */
 static int xpad_play_effect(struct input_dev *dev, void *data,
 			    struct ff_effect *effect)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
+	if (!xpad->rumble_enable)
+		return 0;
+
 	if (effect->type == FF_RUMBLE) {
 		__u16 strong = effect->u.rumble.strong_magnitude;
 		__u16 weak = effect->u.rumble.weak_magnitude;
-		xpad->odata[0] = 0x00;
-		xpad->odata[1] = 0x08;
-		xpad->odata[2] = 0x00;
-		xpad->odata[3] = strong / 256;
-		xpad->odata[4] = weak / 256;
-		xpad->odata[5] = 0x00;
-		xpad->odata[6] = 0x00;
-		xpad->odata[7] = 0x00;
-		xpad->irq_out->transfer_buffer_length = 8;
+		mutex_lock(&xpad->odata_mutex);
+		if (xpad->xtype == XTYPE_XBOX360W) {
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x01;
+			xpad->odata[2] = 0x0f;
+			xpad->odata[3] = 0xc0;
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = strong / 256;
+			xpad->odata[6] = weak / 256;
+			xpad->odata[7] = 0x00;
+			xpad->odata[8] = 0x00;
+			xpad->odata[9] = 0x00;
+			xpad->odata[10] = 0x00;
+			xpad->odata[11] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 12;
+		} else {
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x08;
+			xpad->odata[2] = 0x00;
+			xpad->odata[3] = strong / 256;
+			xpad->odata[4] = weak / 256;
+			xpad->odata[5] = 0x00;
+			xpad->odata[6] = 0x00;
+			xpad->odata[7] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 8;
+		}
 		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+		mutex_unlock(&xpad->odata_mutex);
 	}
 
 	return 0;
@@ -572,7 +960,7 @@
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
-	if (xpad->xtype != XTYPE_XBOX360)
+	if ((xpad->xtype != XTYPE_XBOX360) && (xpad->xtype != XTYPE_XBOX360W))
 		return 0;
 
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -581,26 +969,49 @@
 }
 
 #else
+/* dummy implementation for xpad_probe */
 static int xpad_init_ff(struct usb_xpad *xpad) { return 0; }
 #endif
 
-#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
-#include <linux/leds.h>
 
-struct xpad_led {
-	char name[16];
-	struct led_classdev led_cdev;
-	struct usb_xpad *xpad;
-};
+/* end force feedback section */
+
+/*****************************************************************************/
+
+/* LED handling section: provides support for the ring of LEDs on the 360
+ * controllers. */
+
+#ifdef CONFIG_JOYSTICK_XPAD_LEDS
+
 
+/* XBox 360 wireless controller follows protocol from xboxdrv userspace
+ * driver:
+ *    http://pingus.seul.org/~grumbel/xboxdrv/
+ */
 static void xpad_send_led_command(struct usb_xpad *xpad, int command)
 {
 	if (command >= 0 && command < 14) {
 		mutex_lock(&xpad->odata_mutex);
-		xpad->odata[0] = 0x01;
-		xpad->odata[1] = 0x03;
-		xpad->odata[2] = command;
-		xpad->irq_out->transfer_buffer_length = 3;
+		if (xpad->xtype == XTYPE_XBOX360W) {
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x00;
+			xpad->odata[2] = 0x08;
+			xpad->odata[3] = 0x40 + (command % 0x0e);
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = 0x00;
+			xpad->odata[6] = 0x00;
+			xpad->odata[7] = 0x00;
+			xpad->odata[8] = 0x00;
+			xpad->odata[9] = 0x00;
+			xpad->odata[10] = 0x00;
+			xpad->odata[11] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 12;
+		} else {
+			xpad->odata[0] = 0x01;
+			xpad->odata[1] = 0x03;
+			xpad->odata[2] = command;
+			xpad->irq_out->transfer_buffer_length = 3;
+		}
 		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
 		mutex_unlock(&xpad->odata_mutex);
 	}
@@ -615,6 +1026,7 @@
 	xpad_send_led_command(xpad_led->xpad, value);
 }
 
+
 static int xpad_led_probe(struct usb_xpad *xpad)
 {
 	static atomic_t led_seq	= ATOMIC_INIT(0);
@@ -623,7 +1035,7 @@
 	struct led_classdev *led_cdev;
 	int error;
 
-	if (xpad->xtype != XTYPE_XBOX360)
+	if ((xpad->xtype != XTYPE_XBOX360) && (xpad->xtype != XTYPE_XBOX360W))
 		return 0;
 
 	xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
@@ -664,17 +1076,23 @@
 	}
 }
 #else
+/* dummies for xpad_probe and xpad_disconnect */
 static int xpad_led_probe(struct usb_xpad *xpad) { return 0; }
 static void xpad_led_disconnect(struct usb_xpad *xpad) { }
 #endif
 
+/* end LED section */
+
+/*****************************************************************************/
+
+/* Module and device functions */
 
 static int xpad_open(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	/* URB was submitted in probe */
-	if(xpad->xtype == XTYPE_XBOX360W)
+	if (xpad->xtype == XTYPE_XBOX360W)
 		return 0;
 
 	xpad->irq_in->dev = xpad->udev;
@@ -688,7 +1106,7 @@
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
-	if(xpad->xtype != XTYPE_XBOX360W)
+	if (xpad->xtype != XTYPE_XBOX360W)
 		usb_kill_urb(xpad->irq_in);
 	xpad_stop_output(xpad);
 }
@@ -706,7 +1124,10 @@
 		break;
 	case ABS_Z:
 	case ABS_RZ:	/* the triggers */
-		input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+		/* Triggers have a phony -255 to 255 range. Normally, only
+		 * 0 to 255 will be reported (+ axis), unless full_trigger_axis
+		 * is set, in which case -255 to 255 will be reported. */
+		input_set_abs_params(input_dev, abs, -255, 255, 0, 0);
 		break;
 	case ABS_HAT0X:
 	case ABS_HAT0Y:	/* the d-pad (only if MAP_DPAD_TO_AXES) */
@@ -715,18 +1136,22 @@
 	}
 }
 
-static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+static int xpad_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct usb_xpad *xpad;
 	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
+	int controller_type;
 	int i;
 	int error = -ENOMEM;
 
 	for (i = 0; xpad_device[i].idVendor; i++) {
-		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
-		    (le16_to_cpu(udev->descriptor.idProduct) == xpad_device[i].idProduct))
+		if ((le16_to_cpu(udev->descriptor.idVendor) ==
+						xpad_device[i].idVendor) &&
+				(le16_to_cpu(udev->descriptor.idProduct) ==
+						xpad_device[i].idProduct))
 			break;
 	}
 
@@ -747,11 +1172,14 @@
 	xpad->udev = udev;
 	xpad->dpad_mapping = xpad_device[i].dpad_mapping;
 	xpad->xtype = xpad_device[i].xtype;
+	controller_type = xpad_device[i].controller_type;
 	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
 		xpad->dpad_mapping = !dpad_to_buttons;
 	if (xpad->xtype == XTYPE_UNKNOWN) {
-		if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) {
-			if (intf->cur_altsetting->desc.bInterfaceProtocol == 129)
+		if (intf->cur_altsetting->desc.bInterfaceClass ==
+					USB_CLASS_VENDOR_SPEC) {
+			if (intf->cur_altsetting->desc.bInterfaceProtocol ==
+					129)
 				xpad->xtype = XTYPE_XBOX360W;
 			else
 				xpad->xtype = XTYPE_XBOX360;
@@ -783,16 +1211,18 @@
 	else
 		for (i = 0; xpad_btn[i] >= 0; i++)
 			set_bit(xpad_btn[i], input_dev->keybit);
-	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
+	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) {
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
 			set_bit(xpad_btn_pad[i], input_dev->keybit);
+	}
 
 	/* set up axes */
 	for (i = 0; xpad_abs[i] >= 0; i++)
 		xpad_set_up_abs(input_dev, xpad_abs[i]);
-	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
 		for (i = 0; xpad_abs_pad[i] >= 0; i++)
-		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+	}
 
 	error = xpad_init_output(intf, xpad);
 	if (error)
@@ -820,6 +1250,10 @@
 
 	usb_set_intfdata(intf, xpad);
 
+	xpad->controller_type = controller_type;
+	if (controller_type != XCONTROLLER_TYPE_NONE)
+		xpad_init_controller(xpad);
+
 	/*
 	 * Submit the int URB immediatly rather than waiting for open
 	 * because we get status messages from the device whether
@@ -828,48 +1262,43 @@
 	 * we're waiting for.
 	 */
 	if (xpad->xtype == XTYPE_XBOX360W) {
+		xpad->controller_present = 0;
+		xpad->controller_number =
+			(intf->cur_altsetting->desc.bInterfaceNumber / 2) + 1;
 		xpad->irq_in->dev = xpad->udev;
 		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
 		if (error)
-			goto fail4;
-
-		/*
-		 * Setup the message to set the LEDs on the
-		 * controller when it shows up
-		 */
-		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if(!xpad->bulk_out)
 			goto fail5;
+		xpad->id_packet = kzalloc(XPAD_PKT_LEN *
+					sizeof(unsigned char), GFP_KERNEL);
+		if (!xpad->id_packet)
+			goto fail5;
+	} else {
+		xpad->controller_present = 1;
+		xpad->controller_number = 0;
+	}
 
-		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if(!xpad->bdata)
-			goto fail6;
-
-		xpad->bdata[2] = 0x08;
-		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
-		case 0:
-			xpad->bdata[3] = 0x42;
-			break;
-		case 2:
-			xpad->bdata[3] = 0x43;
-			break;
-		case 4:
-			xpad->bdata[3] = 0x44;
-			break;
-		case 6:
-			xpad->bdata[3] = 0x45;
-		}
-
-		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		usb_fill_bulk_urb(xpad->bulk_out, udev,
-				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
-				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+	/* Set up device attributes */
+	xpad->sysfs_ok = 1;
+	xpad->controller_unique_id[0] = '\0';
+	error = sysfs_create_group(&input_dev->dev.kobj,
+						&xpad_default_attr_group);
+	if (error) {
+		/* Driver will work without the sysfs interface, but parameters
+		 * will not be adjustable, so this failure is a warning. */
+		printk(KERN_WARNING
+			"xpad: sysfs_create_group failed with error %d\n",
+			error);
+		xpad->sysfs_ok = 0;
 	}
+	
+	INIT_WORK(&xpad->work, &xpad_work_controller);
 
 	return 0;
 
- fail6:	usb_free_urb(xpad->bulk_out);
- fail5:	usb_kill_urb(xpad->irq_in);
+ fail5: usb_set_intfdata(intf, NULL);
+	input_unregister_device(xpad->dev);
+	xpad_led_disconnect(xpad);
  fail4:	usb_free_urb(xpad->irq_in);
  fail3:	xpad_deinit_output(xpad);
  fail2:	usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
@@ -881,31 +1310,32 @@
 
 static void xpad_disconnect(struct usb_interface *intf)
 {
-	struct usb_xpad *xpad = usb_get_intfdata (intf);
+	struct usb_xpad *xpad = usb_get_intfdata(intf);
 
 	usb_set_intfdata(intf, NULL);
 	if (xpad) {
+		/* Ensure we don't have any pending work */
+		flush_scheduled_work();
+
+		if (xpad->sysfs_ok)
+			sysfs_remove_group(&xpad->dev->dev.kobj,
+						&xpad_default_attr_group);
+
 		xpad_led_disconnect(xpad);
 		input_unregister_device(xpad->dev);
 		xpad_deinit_output(xpad);
-		if (xpad->xtype == XTYPE_XBOX360W) {
-			usb_kill_urb(xpad->bulk_out);
-			usb_free_urb(xpad->bulk_out);
+		if (xpad->xtype == XTYPE_XBOX360W)
 			usb_kill_urb(xpad->irq_in);
-		}
 		usb_free_urb(xpad->irq_in);
 		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->idata, xpad->idata_dma);
+		if (xpad->id_packet)
+			kfree(xpad->id_packet);
 		kfree(xpad);
 	}
 }
 
-static struct usb_driver xpad_driver = {
-	.name		= "xpad",
-	.probe		= xpad_probe,
-	.disconnect	= xpad_disconnect,
-	.id_table	= xpad_table,
-};
+
 
 static int __init usb_xpad_init(void)
 {
@@ -920,6 +1350,7 @@
 	usb_deregister(&xpad_driver);
 }
 
+
 module_init(usb_xpad_init);
 module_exit(usb_xpad_exit);
 
diff -uNr origdrv/drivers/input/joystick/xpad.h newdrv/drivers/input/joystick/xpad.h
--- origdrv/drivers/input/joystick/xpad.h	1969-12-31 19:00:00.000000000 -0500
+++ newdrv/drivers/input/joystick/xpad.h	2009-03-02 23:11:27.000000000 -0500
@@ -0,0 +1,398 @@
+/*
+ * Xbox gamepad driver with Xbox 360 wired/wireless support
+ *
+ * Last Modified:	2 March 2009
+ *			Mike Murphy <mamurph@xxxxxxxxxxxxxx>
+ *
+ * Copyright (c) 2002 Marko Friedemann <mfr@xxxxxxxxxxxxxxx>
+ *               2004 Oliver Schwartz <Oliver.Schwartz@xxxxxx>,
+ *                    Steven Toth <steve@xxxxxxxxxxxxxxxx>,
+ *                    Franz Lehner <franz@xxxxxxx>,
+ *                    Ivan Hawkes <blackhawk@xxxxxxxxxxxxxx>
+ *               2005 Dominic Cerquetti <binary1230@xxxxxxxxx>
+ *               2006 Adam Buchbinder <adam.buchbinder@xxxxxxxxx>
+ *               2007 Jan Kratochvil <honza@xxxxxxxx>
+ *               2009 Clemson University
+ *		      (contact: Mike Murphy <mamurph@xxxxxxxxxxxxxx>)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * This driver is based on:
+ *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
+ *  - the iForce driver    drivers/char/joystick/iforce.c
+ *  - the skeleton-driver  drivers/usb/usb-skeleton.c
+ *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
+ *  - xboxdrv docs         http://pingus.seul.org/~grumbel/xboxdrv/
+ *
+ * Thanks to:
+ *  - ITO Takayuki for providing essential xpad information on his website
+ *  - Vojtech Pavlik     - iforce driver / input subsystem
+ *  - Greg Kroah-Hartman - usb-skeleton driver
+ *  - XBOX Linux project - extra USB id's
+ *
+ * TODO:
+ *  - fix "analog" buttons (reported as digital now)
+ *  - need USB IDs for other dance pads
+ *
+ * Driver history is located at the bottom of this file.
+ */
+
+#ifndef _XPAD_H
+#define _XPAD_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/workqueue.h>
+
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_JOYSTICK_XPAD_LEDS
+#include <linux/leds.h>
+
+struct xpad_led {
+	char name[16];
+	struct led_classdev led_cdev;
+	struct usb_xpad *xpad;
+};
+#endif
+
+
+#define DRIVER_AUTHOR "Marko Friedemann <mfr@xxxxxxxxxxxxxxx>"
+#define DRIVER_DESC "Xbox/360 pad driver"
+
+#define XPAD_PKT_LEN 32
+
+
+/* xbox d-pads should map to buttons, as is required for DDR pads
+   but we map them to axes when possible to simplify things */
+#define MAP_DPAD_TO_BUTTONS    0
+#define MAP_DPAD_TO_AXES       1
+#define MAP_DPAD_UNKNOWN       2
+
+/* Type of controller *interface* (original, wired 360, wireless 360) */
+#define XTYPE_XBOX        0
+#define XTYPE_XBOX360     1
+#define XTYPE_XBOX360W    2
+#define XTYPE_UNKNOWN     3
+
+/* Type of controller (e.g. pad, guitar, other input device) */
+#define XCONTROLLER_TYPE_NONE		0
+#define XCONTROLLER_TYPE_PAD		1
+#define XCONTROLLER_TYPE_GUITAR		2
+#define XCONTROLLER_TYPE_DANCE_PAD	3
+#define XCONTROLLER_TYPE_OTHER		255
+
+
+/* The Xbox 360 controllers have sensitive sticks that often do not center
+ * exactly. A dead zone causes stick events below a certain threshhold to be
+ * reported as zero.
+ *
+ * The default dead zone size is 8192, which was obtained by testing a
+ * wireless 360 controller with jstest(1) and consulting gaming forums for
+ * a recommended dead zone for this controller. The consensus opinion was
+ * 0.25 (on a scale from 0 to 1), which corresponds to 8192 (out of 32767).
+ */
+#define XDEAD_ZONE_DEFAULT   8192
+
+/* Default limit for the sticks is the maximum axis value (32767), which will
+ * cause the sticks to have a radial axis as designed in the hardware. To
+ * enable square axis support, set the stick limits to 23170 or lower at run
+ * time via the sysfs interface. */
+#define XSTICK_LIMIT_DEFAULT 32767
+
+/* Rumble normally enabled */
+#define XRUMBLE_DEFAULT		1
+
+/* Normally, trigger axes report in the range 0 to 32767 (positive axis only) */
+#define XFULL_TRIGGER_AXIS_DEFAULT	0
+
+
+/* Xbox 360 has a vendor-specific class, so we cannot match it with only
+ * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
+ * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
+ * wireless controllers have protocol 129. */
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | \
+			USB_DEVICE_ID_MATCH_INT_INFO, \
+	.idVendor = (vend), \
+	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
+	.bInterfaceSubClass = 93, \
+	.bInterfaceProtocol = (pr)
+#define XPAD_XBOX360_VENDOR(vend) \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend, 1) }, \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend, 129) }
+
+
+
+/* Some of the fields in the following structure are for later use with
+ * userspace applications to recognize individual controllers. The dead zones
+ * and axis limits can be changed "on the fly" and are effective immediately.
+ *
+ * The fields labeled "ro" and "rw" are intended to be read-only and
+ * read-write, respectively, when exposed in sysfs. Most of the read-only
+ * fields are to support *wireless* 360 controllers. The controller_number
+ * is used to set the LED, while controller_present tracks whether the
+ * controller is connected to the wireless receiver. Controller type applies
+ * to all models (wired and wireless), and tracks whether the device is a pad,
+ * guitar, etc. for later userspace use. See the comment above regarding
+ * type and unique ID detection on wireless 360 receivers.
+ */
+struct usb_xpad {
+	struct input_dev *dev;		/* input device interface */
+	struct usb_device *udev;	/* usb device */
+
+	struct urb *irq_in;		/* urb for interrupt in report */
+	unsigned char *idata;		/* input data */
+	dma_addr_t idata_dma;
+
+#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
+	struct urb *irq_out;		/* urb for interrupt out report */
+	unsigned char *odata;		/* output data */
+	dma_addr_t odata_dma;
+	struct mutex odata_mutex;
+#endif
+
+#ifdef CONFIG_JOYSTICK_XPAD_LEDS
+	struct xpad_led *led;
+#endif
+
+	char phys[64];			/* physical device path */
+
+	int dpad_mapping;		/* map d-pad to buttons or to axes */
+	int xtype;			/* type of xbox device */
+
+	/* Work structure for moving the call to xpad_send_led_command
+	 * outside the interrupt handler for packet processing */
+	struct work_struct work;
+	
+	/* id packet for wireless 360 controller */
+	unsigned char *id_packet;
+
+	int controller_number;		/* controller # (1-4) for 360w. ro */
+	int controller_present;         /* 360w controller presence. ro */
+	int controller_type;            /* controller type. ro */
+	char controller_unique_id[17];  /* unique ID of controller (360w). ro */
+	unsigned int left_dead_zone;    /* dead zone for left stick. rw */
+	unsigned int right_dead_zone;   /* dead zone for right stick. rw */
+	unsigned int left_stick_limit;  /* axis limit for left stick. rw */
+	unsigned int right_stick_limit; /* axis limit for right stick. rw */
+	int rumble_enable;              /* enable/disable rumble. rw */
+	int left_trigger_full_axis;     /* full axis - left trigger. rw */
+	int right_trigger_full_axis;    /* full axis - right trigger. rw */
+
+	int sysfs_ok;                   /* sysfs interface OK */
+};
+#define to_xpad(d) input_get_drvdata(to_input_dev(d))
+
+
+/* Function prototypes for non-sysfs interface functions */
+static void set_dead_zone(unsigned int new_size, unsigned int *dz,
+	unsigned int stick_limit);
+static void set_stick_limit(unsigned int new_size, unsigned int *sl,
+	unsigned int dead_zone);
+static void xpad_init_controller(struct usb_xpad *xpad);
+static void xpad_send_led_command(struct usb_xpad *xpad, int command);
+static void xpad_work_controller(struct work_struct *w);
+static void xpad_process_sticks(struct usb_xpad *xpad, __le16 *data);
+static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd,
+	unsigned char *data);
+static void xpad360_process_packet(struct usb_xpad *xpad, u16 cmd,
+	unsigned char *data);
+static void xpad360w_identify_controller(struct usb_xpad *xpad);
+static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd,
+	unsigned char *data);
+static void xpad_irq_in(struct urb *urb);
+static void xpad_irq_out(struct urb *urb);
+static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad);
+static void xpad_stop_output(struct usb_xpad *xpad);
+static void xpad_stop_output(struct usb_xpad *xpad);
+static int xpad_play_effect(struct input_dev *dev, void *data,
+			    struct ff_effect *effect);
+static int xpad_init_ff(struct usb_xpad *xpad);
+static void xpad_send_led_command(struct usb_xpad *xpad, int command);
+static void xpad_led_set(struct led_classdev *led_cdev,
+	enum led_brightness value);
+static int xpad_led_probe(struct usb_xpad *xpad);
+static void xpad_led_disconnect(struct usb_xpad *xpad);
+static int xpad_open(struct input_dev *dev);
+static void xpad_close(struct input_dev *dev);
+static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs);
+static int xpad_probe(struct usb_interface *intf,
+	const struct usb_device_id *id);
+static void xpad_disconnect(struct usb_interface *intf);
+static int __init usb_xpad_init(void);
+static void __exit usb_xpad_exit(void);
+
+
+/* sysfs interface */
+static ssize_t xpad_show_uint(struct device *dev, struct device_attribute *attr,
+		char *buf);
+static ssize_t xpad_store_uint(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count);
+static ssize_t xpad_store_bool(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count);
+static ssize_t xpad_store_ro(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count);
+static ssize_t xpad_show_int(struct device *dev, struct device_attribute *attr,
+		char *buf);
+static ssize_t xpad_show_id(struct device *dev,
+		struct device_attribute *attr, char *buf);
+
+
+
+/* Device attributes */
+static DEVICE_ATTR(left_dead_zone, 0644, xpad_show_uint, xpad_store_uint);
+static DEVICE_ATTR(right_dead_zone, 0644, xpad_show_uint, xpad_store_uint);
+static DEVICE_ATTR(left_stick_limit, 0644, xpad_show_uint, xpad_store_uint);
+static DEVICE_ATTR(right_stick_limit, 0644, xpad_show_uint, xpad_store_uint);
+static DEVICE_ATTR(rumble_enable, 0644, xpad_show_int, xpad_store_bool);
+static DEVICE_ATTR(left_trigger_full_axis, 0644, xpad_show_int,
+			xpad_store_bool);
+static DEVICE_ATTR(right_trigger_full_axis, 0644, xpad_show_int,
+			xpad_store_bool);
+static DEVICE_ATTR(controller_number, 0444, xpad_show_int, xpad_store_ro);
+static DEVICE_ATTR(controller_present, 0444, xpad_show_int, xpad_store_ro);
+static DEVICE_ATTR(controller_type, 0444, xpad_show_int, xpad_store_ro);
+static DEVICE_ATTR(id, 0444, xpad_show_id, xpad_store_ro);
+
+static struct attribute *xpad_default_attrs[] = {
+	&dev_attr_left_dead_zone.attr,
+	&dev_attr_right_dead_zone.attr,
+	&dev_attr_left_stick_limit.attr,
+	&dev_attr_right_stick_limit.attr,
+	&dev_attr_rumble_enable.attr,
+	&dev_attr_left_trigger_full_axis.attr,
+	&dev_attr_right_trigger_full_axis.attr,
+	&dev_attr_controller_number.attr,
+	&dev_attr_controller_present.attr,
+	&dev_attr_controller_type.attr,
+	&dev_attr_id.attr,
+	NULL
+};
+
+static struct attribute_group xpad_default_attr_group = {
+	.attrs = xpad_default_attrs,
+	.name = "game_device",
+};
+
+#endif
+
+/* Driver History:
+ *
+ * 2009-03-02 : Code cleanup
+ *  - used min(), max(), and abs() where appropriate, simplifying code
+ *  - moved code that generates data objects out of xpad.h and into xpad.c
+ *  - changed legacy #if defined(...) to #ifdef
+ *  - removed unnecessary typecasts
+ *  - wireless 360 controller identification now done in workqueue task
+ *  - thanks Andrew Morton, Greg K-H, and Linus Torvalds
+ *
+ * 2009-02-28 : Triggers now half-axes by default
+ *  - triggers will now be positive half-axes only, unless a full axis mapping
+ *    is enabled via the sysfs interface on a per-trigger basis
+ *  - moved INIT_WORK to xpad_probe and removed INIT_WORK/PREPARE_WORK from
+ *    interrupt handler; also removed the work_pending flag from struct
+ *    usb_xpad (always flush shared workqueue on unload)
+ *  - read-write sysfs attributes now have 644 default permissions
+ *
+ * 2009-02-23 : Changes per mailing list (thanks Frederic Weisbecker)
+ *  - no more check for CONFIG_SYSFS: sysfs functions will simply return
+ *    0 if sysfs has not been enabled
+ *  - fixed weird ordering in sscanf return check
+ *  - checked code with scripts/checkpatch.pl and made style adjustments
+ *
+ * 2009-02-21 : Refactored and changed stick handling
+ *  - split code into two pieces (xpad.h and xpad.c)
+ *  - cleaned up sysfs interface
+ *  - changed square axis algorithm to an axis limit algorithm, which allows
+ *    size of inscribed square to be adjusted; available for both sticks
+ *  - dead zones now per-stick
+ *
+ * 2009-02-18 : Changes per mailing list (and some additions)
+ *  - revised sysfs interface (thanks Greg K-H)
+ *  - check return values of sscanf (thanks Oliver Neukum)
+ *  - urb submission while holding mutex now once again GFP_KERNEL
+ *    (thanks Oliver Neukum)
+ *  - work structure fixes (thanks Oliver Neukum)
+ *  - uevents generated for wireless controller online/offline
+ *  - sysfs interface only if CONFIG_SYSFS is set
+ *
+ * 2009-02-15 : Minor adjustments
+ *  - added KOBJ_ONLINE/KOBJ_OFFLINE events when controllers are connected to
+ *    or disconnected from the wireless 360 receiver
+ *  - ignore duplicate connect messages on the same connection
+ *  - added option to enable/disable rumble on a per-controller basis
+ *  - rumble events are not sent to guitar or dance pad devices
+ *
+ * 2009-02-14 : Added sysfs interface
+ *  - dead zones and square axis settings can now be made per-controller
+ *  - removed dead_zone and square_axis module parameters (use sysfs)
+ *  - new square axis algorithm
+ *
+ * 2009-02-13 : Disable square axis for right stick
+ *  - square axis applies to left stick only
+ *
+ * 2009-02-12 : Scaling for dead zone and square axis support
+ *  - axes now scale from 0 to 32767 starting at edge of dead zone
+ *  - increased default dead zone to 8192
+ *  - initial square axis support (reliable only with left stick)
+ *
+ * 2009-02-07 : More wireless 360 controller fixes
+ *  - removed bulk urb completely
+ *  - use xpad_send_led_command to set controller number on LED display
+ *    (wireless 360 controller)
+ *  - dead_zone is now an adjustable module parameter
+ *
+ * 2009-02-06 : Axis handling improvements
+ *  - unified handler for left and right sticks
+ *  - initial support for dead zones
+ *
+ * 2009-02-02 : Wireless 360 controller fixes
+ *  - followed PROTOCOL description from xboxdrv userspace driver
+ *  - LED and rumble support added for wireless 360 controller (protocol
+ *    is different from wired!)
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ *  - borrowed from the XBOX linux kernel
+ *  - USB id's for commonly used dance pads are present
+ *  - dance pads will map D-PAD to buttons, not axes
+ *  - pass the module paramater 'dpad_to_buttons' to force
+ *    the D-PAD to map to buttons if your pad is not detected
+ *
+ * 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2002-07-16 - 0.0.4 : minor changes, merge with Vojtech's v0.0.3
+ *  - verified the lack of HID and report descriptors
+ *  - verified that ALL buttons WORK
+ *  - fixed d-pad to axes mapping
+ *
+ * 2002-07-14 - 0.0.3 : rework by Vojtech Pavlik
+ *  - indentation fixes
+ *  - usb + input init sequence fixes
+ *
+ * 2002-07-02 - 0.0.2 : basic working version
+ *  - all axes and 9 of the 10 buttons work (german InterAct device)
+ *  - the black button does not work
+ *
+ * 2002-06-27 - 0.0.1 : first version, just said "XBOX HID controller"
+ *
+ */

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux