Linux RAID Storage Date Index
[Prev Page][Next Page]
- Re: recommended way to add ssd cache to mdraid array
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: Dan Williams <djbw@xxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: chris <tknchris@xxxxxxxxx>
- Re: Slow RAID 5 performance all of a sudden
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Slow RAID 5 performance all of a sudden
- From: Divan Santana <divan@xxxxxxxxxxxxxxxx>
- Re: What to do about "ignoring %s as it reports %s as failed"?
- From: Daniel Browning <db@xxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Nicholas Ipsen <NCLI@xxxxxxxxxxxxxxx>
- mdadm grow size gives device or resource busy error
- From: "dan1" <dan1@xxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: [PATCH 11/15] dm: use new hashtable implementation
- From: Sasha Levin <levinsasha928@xxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: chris <tknchris@xxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Nicholas Ipsen <NCLI@xxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: Dan Williams <djbw@xxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] imsm: Forbid spanning between multiple controllers.
- From: Phillip Susi <psusi@xxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: chris <tknchris@xxxxxxxxx>
- What to do about "ignoring %s as it reports %s as failed"?
- From: Daniel Browning <db@xxxxxxxxx>
- Re: Recovery/Access of imsm raid via mdadm?
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Recovery/Access of imsm raid via mdadm?
- From: chris <tknchris@xxxxxxxxx>
- Re: [PATCH] DM-RAID: Fix RAID10's check for sufficient redundancy
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
- Re: Linear raid extend component
- From: Adam Goryachev <adam@xxxxxxxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] DM-RAID: Fix RAID10's check for sufficient redundancy
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] DM-RAID: Fix RAID10's check for sufficient redundancy
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- [PATCH] DM-RAID: Fix RAID10's check for sufficient redundancy
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Nicholas Ipsen <NCLI@xxxxxxxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Tudor Holton <tudor@xxxxxxxxxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: <pg_mh@xxxxxxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: "Nicholas Ipsen(Sephiroth_VII)" <sephiroth7vii@xxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: Trouble adding disk to degraded array
- From: Phil Turmel <philip@xxxxxxxxxx>
- Trouble adding disk to degraded array
- From: "Nicholas Ipsen(Sephiroth_VII)" <sephiroth7vii@xxxxxxxxx>
- Automatically adding spares on boot
- From: Can Jeuleers <can.jeuleers@xxxxxxxxx>
- re: md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- re: md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- re: md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: How do I tell which disk failed?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- How do I tell which disk failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH 4 of 4 - v2] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: [PATCH 4 of 4 - v2] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: NeilBrown <neilb@xxxxxxx>
- Re: [RFC PATCH] raid5: Correct some failed-stripe which because the badsector.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: [PATCH 3 of 4] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2)
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: [PATCH 4 of 4] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: Adding a fresh drive to a degraded RAID1 (not as spare but instead of a "removed" device)
- From: Ciprian Dorin Craciun <ciprian.craciun@xxxxxxxxx>
- Re: [PATCH 4 of 4] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 3 of 4] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2)
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: NeilBrown <neilb@xxxxxxx>
- Re: RAID5 member disks shrunk
- From: "Alex Leach" <beamesleach@xxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Fwd: Re: RAID5 member disks shrunk
- From: "Alex Leach" <beamesleach@xxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: pg@xxxxxxxxxxxxxxxxxxxx (Peter Grandi)
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- RAID10: how much does chunk size matter? Can partial chunks be written?
- From: Andras Korn <korn@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: RAID5 member disks shrunk
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Re: RAID5 member disks shrunk
- From: "Alex Leach" <beamesleach@xxxxxxxxx>
- Re: RAID5 member disks shrunk
- From: "Alex Leach" <beamesleach@xxxxxxxxx>
- Re: RAID5 member disks shrunk
- From: Roman Mamedov <rm@xxxxxxxxxx>
- RAID5 member disks shrunk
- From: "Alex Leach" <beamesleach@xxxxxxxxx>
- Re: [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: Linear raid extend component
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Linear raid extend component
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: Linear raid extend component
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Adding a fresh drive to a degraded RAID1 (not as spare but instead of a "removed" device)
- From: Ciprian Dorin Craciun <ciprian.craciun@xxxxxxxxx>
- Re: Linear raid extend component
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Linear raid extend component
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Linear raid extend component
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Linear raid extend component
- From: Adam Goryachev <adam@xxxxxxxxxxxxxxxxxxxxxx>
- Re: md: kicking non-fresh sdf3 from array!
- From: Mark Knecht <markknecht@xxxxxxxxx>
- Re: possibly silly configuration question
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: md: kicking non-fresh sdf3 from array!
- From: Mark Knecht <markknecht@xxxxxxxxx>
- Re: md: kicking non-fresh sdf3 from array!
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: md: kicking non-fresh sdf3 from array!
- From: Phil Turmel <philip@xxxxxxxxxx>
- md: kicking non-fresh sdf3 from array!
- From: Mark Knecht <markknecht@xxxxxxxxx>
- Re: possibly silly configuration question
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: possibly silly configuration question
- From: Adam Goryachev <mailinglists@xxxxxxxxxxxxxxxxxxxxxx>
- Re: possibly silly configuration question
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: possibly silly configuration question
- From: Adam Goryachev <mailinglists@xxxxxxxxxxxxxxxxxxxxxx>
- possibly silly configuration question
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: Any risk switching mdadm to static?
- From: Tommy Apel Hansen <tommyapeldk@xxxxxxxxx>
- Re: Any risk switching mdadm to static?
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Any risk switching mdadm to static?
- From: Tommy Apel Hansen <tommyapeldk@xxxxxxxxx>
- Re: Any risk switching mdadm to static?
- From: Phil Turmel <philip@xxxxxxxxxx>
- Any risk switching mdadm to static?
- From: Mark Knecht <markknecht@xxxxxxxxx>
- Re:
- From: bobzer <bobzer@xxxxxxxxx>
- [PATCH] raid5: Fix to_read/to_write judgement.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re:
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Can this array be recovered?
- From: Jaap Winius <jwinius@xxxxxxx>
- Re: Can this array be recovered?
- From: Jaap Winius <jwinius@xxxxxxx>
- Re: Can this array be recovered?
- From: Jaap Winius <jwinius@xxxxxxx>
- Re: Can this array be recovered?
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re:
- From: Phil Turmel <philip@xxxxxxxxxx>
- Can this array be recovered?
- From: Jaap Winius <jwinius@xxxxxxx>
- [no subject]
- From: bobzer <bobzer@xxxxxxxxx>
- Re: Spare disk not becoming active
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Re: Spare disk not becoming active
- From: Tudor Holton <tudor@xxxxxxxxxxxxxxxxx>
- Re: Disk speed comparison
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Few questions about a raid array with 3 faulty spares
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: Disk speed comparison
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Disk speed comparison
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: Disk speed comparison
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Few questions about a raid array with 3 faulty spares
- From: Garðar Arnarsson <gardar@xxxxxxxxxxx>
- Re: Disk speed comparison
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Disk speed comparison
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Re: Disk speed comparison
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Disk speed comparison
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Disk speed comparison
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- recommended way to add ssd cache to mdraid array
- From: Thomas Fjellstrom <thomas@xxxxxxxxxxxxx>
- Re: Expanding raid0
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: pg@xxxxxxxxxxxxxxxx (Peter Grandi)
- Re: how to proceed with possible corruption
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: Spare disk not becoming active
- From: Roger Heflin <rogerheflin@xxxxxxxxx>
- Re: Spare disk not becoming active
- From: Tudor Holton <tudor@xxxxxxxxxxxxxxxxx>
- Re: how to proceed with possible corruption
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: how to proceed with possible corruption
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Expanding raid0
- From: Kubes <pkubat.mlist@xxxxxxxxxxxxxxxxxxx>
- how to proceed with possible corruption
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: super slow reshape speed after power failure
- From: pg@xxxxxxxxxxxxxxxxxxx (Peter Grandi)
- Re: super slow reshape speed after power failure
- From: pg@xxxxxxxxxxxxxxxxx (Peter Grandi)
- super slow reshape speed after power failure
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Upgarding Mdadm
- From: Mike Alsop <mike.alsop@xxxxxxxxxxx>
- [PULL REQUEST] md update for 3.8
- From: NeilBrown <neilb@xxxxxxx>
- Re: strange partition table and slow speeds
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- [PATCH 3 of 4] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 2)
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- [PATCH 4 of 4] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- [PATCH 2 of 4] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- [PATCH 1 of 4] MD RAID10: Minor non-functional code changes
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- [PATCH 0 of 4] MD RAID10: Improve redundancy of RAID10 'far' and 'offset' algorithms
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: strange partition table and slow speeds
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: WD "RED" drives - are they any good for mdadm?
- From: Michael-John Turner <mj@xxxxxxxxxxxx>
- Re: WD "RED" drives - are they any good for mdadm?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- [PATCH 11/15] dm: use new hashtable implementation
- From: Sasha Levin <sasha.levin@xxxxxxxxxx>
- Re: WD "RED" drives - are they any good for mdadm?
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- strange partition table and slow speeds
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: WD "RED" drives - are they any good for mdadm?
- From: Phil Turmel <philip@xxxxxxxxxx>
- WD "RED" drives - are they any good for mdadm?
- From: maurice <mhilarius@xxxxxxxxx>
- RE: imsm: 32 bit sector counts and > 2TB disks
- From: "Dorau, Lukasz" <lukasz.dorau@xxxxxxxxx>
- Re:
- From: Phil Turmel <philip@xxxxxxxxxx>
- [no subject]
- From: "Maik Purwin" <maik@xxxxxxxxxxxx>
- [PATCH] md: cleanup: move the comment for bio_clone_mddev to the right place
- I love md RAID
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
- Re: [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH] md: raid1,10: Handle REQ_WRITE_SAME flag in write bios
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: [PATCH 1 of 2] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: Degraded Raid6
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- strange partition table and slow throughput
- From: Alex Pientka <alex.pientka@xxxxxxxxx>
- Re: Degraded Raid6
- From: EJ Vincent <ej@xxxxxxxxx>
- Re: Degraded Raid6
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: imsm: 32 bit sector counts and > 2TB disks
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
- imsm: 32 bit sector counts and > 2TB disks
- From: Phillip Susi <psusi@xxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: "Andris Berzins" <pkix@xxxxxxxx>
- Re: Degraded Raid6
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] lib/raid6: Add AVX2 optimized gen_syndrome functions
- From: Yuanhan Liu <yuanhan.liu@xxxxxxxxxxxxxxx>
- Re: Degraded Raid6
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: [PATCH 1/2] lib/raid6: Add AVX2 optimized gen_syndrome functions
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 1/2] lib/raid6: Add AVX2 optimized gen_syndrome functions
- From: Yuanhan Liu <yuanhan.liu@xxxxxxxxxxxxxxx>
- Backporting Linux 3.7 RAID TRIM Patches to CentOS 6.3
- From: Dave Cundiff <syshackmin@xxxxxxxxx>
- Re: [PATCH 1 of 2] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms
- From: NeilBrown <neilb@xxxxxxx>
- Re: MD Raid1, ext4 and write same
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: Find the mirror and sriping disks
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: [PATCH 1 of 2] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Degraded Raid6
- From: "Bernd Waage" <berndman1980@xxxxxx>
- Re: MD Raid1, ext4 and write same
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: MD Raid1, ext4 and write same
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- [PATCH 1 of 2] MD RAID10: Improve redundancy for 'far' and 'offset' algorithms
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- [PATCH 2 of 2] DM RAID: Add support for MD's RAID10 "far" and "offset" algorithms
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: [PATCH] DM RAID: Ensure the bitmap region_size is a power of 2
- From: Alasdair G Kergon <agk@xxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: "Andris Berzins" <pkix@xxxxxxxx>
- Re: [PATCH] DM RAID: Ensure the bitmap region_size is a power of 2
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: Find the mirror and sriping disks
- From: Brassow Jonathan <jbrassow@xxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
- Re: [PATCH] DM RAID: Ensure the bitmap region_size is a power of 2
- From: Alasdair G Kergon <agk@xxxxxxxxxx>
- [PATCH] DM RAID: Ensure the bitmap region_size is a power of 2
- From: Jonathan Brassow <jbrassow@xxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: "Andris Berzins" <pkix@xxxxxxxx>
- Fwd: Data corruption after running mdadm --add
- From: Emil Grama <egrama@xxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: failed raid re-create changed dev size
- From: "Andris Berzins" <pkix@xxxxxxxx>
- Re: failed raid re-create changed dev size
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- failed raid re-create changed dev size
- From: "Andris Berzins" <pkix@xxxxxxxx>
- Re: MD Raid1, ext4 and write same
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: MD Raid1, ext4 and write same
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- MD Raid1, ext4 and write same
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- DDF RAID 10 with md?
- From: Martin Wilck <mwilck@xxxxxxxx>
- Re: problem with raid after reboot
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: problem with raid after reboot
- From: Phil Turmel <philip@xxxxxxxxxx>
- problem with raid after reboot
- From: bobzer <bobzer@xxxxxxxxx>
- Test suite result with 3.4.23-rc1
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] DDF: cleanly save the secondary DDF structure
- [PATCH 2/3] DDF: use existing locations for primary and secondary DDF structure
- [PATCH 3/3] DDF: increase seq number when writing meta data
- Fixes for DDF with LSI BIOS RAID
- Re: mdadm: mdNN: pN size extends beyond EOD, truncated (cannot access imsm windows raid from within linux)
- From: "Joshua C." <joshuacov@xxxxxxxxx>
- [Q] md: Why mddev->pers->status() '[2/1]' - degraded in second value?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- [PATCH] md: fix max_disks check in analyze_sbs
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Find the mirror and sriping disks
- From: Kks Kbase <kks.kbase@xxxxxxxx>
- Re: RAID5 NAS Recovery...00.90.01 vs 00.90
- From: Stephen Haran <steveharan@xxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Problems growing 1 disk linear md online after underlying disk grown
- From: <linux-raid@xxxxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: Checksumming RAID? / SCSI SAS T10 PI and DIF/DIX / T13 SATA EPP
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
- Re: Manually failing a disk during a md raid6 reshape
- From: Jack Wang <jack.wang.usish@xxxxxxxxx>
- Re: 3.7-rc4 hang with mdadm raid10 near layout, with 4 disks, and an internal bitmap
- From: NeilBrown <neilb@xxxxxxx>
- Re: 3.7-rc4 hang with mdadm raid10 near layout, with 4 disks, and an internal bitmap
- From: Peter Maloney <peter.maloney@xxxxxxxxxxxxxxxxxxxx>
- Re: Questions about initialization process of mdadm
- From: NeilBrown <neilb@xxxxxxx>
- Re: Checksumming RAID? / SCSI SAS T10 PI and DIF/DIX / T13 SATA EPP
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: Manually failing a disk during a md raid6 reshape
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- ENODEV from SET_ARRAY_INFO
- From: John Adams <john.adams@xxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: Where can i download mdadm 3.3
- From: NeilBrown <neilb@xxxxxxx>
- Manually failing a disk during a md raid6 reshape
- From: EJ Vincent <ej@xxxxxxxxx>
- Re: Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- mdadm: mdNN: pN size extends beyond EOD, truncated (cannot access imsm windows raid from within linux)
- From: "Joshua C." <joshuacov@xxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Dave Jiang <dave.jiang@xxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: Checksumming RAID? / SCSI SAS T10 PI and DIF/DIX / T13 SATA EPP
- From: Pasi Kärkkäinen <pasik@xxxxxx>
- Re: Checksumming RAID?
- From: Pasi Kärkkäinen <pasik@xxxxxx>
- Re: [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Lukáš Czerner <lczerner@xxxxxxxxxx>
- Re: Definitely seeing linux OS RAID device failure on reboot for 3.x (x >= 5) kernels
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
- Re: Definitely seeing linux OS RAID device failure on reboot for 3.x (x >= 5) kernels
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: NeilBrown <neilb@xxxxxxx>
- Spare disk not becoming active
- From: Tudor Holton <tudor@xxxxxxxxxxxxxxxxx>
- Re: Hang in md-raid1 with 3.7-rcX
- From: NeilBrown <neilb@xxxxxxx>
- Definitely seeing linux OS RAID device failure on reboot for 3.x (x >= 5) kernels
- From: Joe Landman <joe.landman@xxxxxxxxx>
- Re: Hang in md-raid1 with 3.7-rcX
- From: Torsten Kaiser <just.for.lkml@xxxxxxxxxxxxxx>
- Re: Raid 0+1
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Raid 0+1
- From: Oguz Yilmaz <oguzyilmazlist@xxxxxxxxx>
- Re: [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] lib/raid6: build proper files on corresponding arch
- From: Jim Kukunas <james.t.kukunas@xxxxxxxxxxxxxxx>
- [PATCH 1/2] lib/raid6: Add AVX2 optimized gen_syndrome functions
- From: Jim Kukunas <james.t.kukunas@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: Raid 0+1
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: Raid 0+1
- From: Lars Marowsky-Bree <lmb@xxxxxxxx>
- Re: Raid 0+1
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: Raid 0+1
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2 v6] loop: Limit the number of requests in the bio list
- From: Jeff Moyer <jmoyer@xxxxxxxxxx>
- Raid 0+1
- From: Oguz Yilmaz <oguzyilmazlist@xxxxxxxxx>
- Re: [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Lukáš Czerner <lczerner@xxxxxxxxxx>
- Re: [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2 v3] wait: add wait_event_lock_irq() interface
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- [PATCH 2/2 v6] loop: Limit the number of requests in the bio list
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- Re: Adding Raid 1 to Raid 0 on Linux
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Adding Raid 1 to Raid 0 on Linux
- From: Oguz Yilmaz <oguzyilmazlist@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [Bug 45351] General protection fault in raid5, load_balance
- From: Jim Kukunas <james.t.kukunas@xxxxxxxxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm --wait returns while array under construction? [patch question]
- From: NeilBrown <neilb@xxxxxxx>
- Re: [Bug 45351] General protection fault in raid5, load_balance
- From: NeilBrown <neilb@xxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
- Re: Hang in md-raid1 with 3.7-rcX
- From: NeilBrown <neilb@xxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: getting I/O errors in super_written()...any ideas what would cause this?
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
- getting I/O errors in super_written()...any ideas what would cause this?
- From: Chris Friesen <chris.friesen@xxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Drew <drew.kay@xxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: mdadm --wait returns while array under construction? [patch question]
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- [PULL REQUEST] one bugfix for md in 3.7-rc
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 1/2 v2] wait: add wait_event_lock_irq() interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- is there a known issue with MD in the 3.6.6 kernel, where it keeps breaking software raids?
- From: Joe Landman <joe.landman@xxxxxxxxx>
- Re: mdadm --wait returns while array under construction? [patch question]
- From: NeilBrown <neilb@xxxxxxx>
- Re: Checksumming RAID?
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Know about chunk size
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
- Re: mdadm --wait returns while array under construction? [patch question]
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2 v5] loop: Limit the number of requests in the bio list
- From: Jeff Moyer <jmoyer@xxxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Joe Landman <joe.landman@xxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Checksumming RAID?
- From: Bernd Schubert <bernd.schubert@xxxxxxxxxxx>
- Re: Checksumming RAID?
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: a question about how to repair raid5
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Re: Know about chunk size
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Know about chunk size
- From: Kks Kbase <kks.kbase@xxxxxxxx>
- Re: Hang in md-raid1 with 3.7-rcX
- From: Torsten Kaiser <just.for.lkml@xxxxxxxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: question: no-bitmap RAID1 with off-site drive
- From: NeilBrown <neilb@xxxxxxx>
- Re: a question about how to repair raid5
- From: hanguozhong <hanguozhong@xxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: NeilBrown <neilb@xxxxxxx>
- Re: 3.7-rc4 hang with mdadm raid10 near layout, with 4 disks, and an internal bitmap
- From: NeilBrown <neilb@xxxxxxx>
- Re: Hang in md-raid1 with 3.7-rcX
- From: NeilBrown <neilb@xxxxxxx>
- Re: [BUG?] Grow on raid0 causes a level change to raid4 on metadata v1.2
- From: NeilBrown <neilb@xxxxxxx>
- Re: Where can i download mdadm 3.3
- From: NeilBrown <neilb@xxxxxxx>
- Re: System runs with RAID but fails to reboot [explanation?]
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: Know about chunk size
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: a question about how to repair raid5
- From: Robin Hill <robin@xxxxxxxxxxxxxxx>
- Checksumming RAID?
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- a question about how to repair raid5
- From: hanguozhong <hanguozhong@xxxxxxxxxxxx>
- Re: Know about chunk size
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Suggestion for hot-replace
- From: 王金浦 <jinpuwang@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: NeilBrown <neilb@xxxxxxx>
- Re: Suggestion for hot-replace
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: Suggestion for hot-replace
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
- Re: Suggestion for hot-replace
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: Suggestion for hot-replace
- From: Tommy Apel Hansen <tommyapeldk@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
- Re: Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: Tommy Apel Hansen <tommyapeldk@xxxxxxxxx>
- Re: Suggestion for hot-replace
- From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
- Suggestion for hot-replace
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Know about chunk size
- From: Kks Kbase <kks.kbase@xxxxxxxx>
- Hang in md-raid1 with 3.7-rcX
- From: Torsten Kaiser <just.for.lkml@xxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: System runs with RAID but fails to reboot
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- [PULL REQUEST] Several bug fixes for md in 3.7
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- [PATCH 2/2 v5] loop: Limit the number of requests in the bio list
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- RAID5 performace issue
- From: Tommy Apel Hansen <tommyapeldk@xxxxxxxxx>
- Re: RAID5 NAS Recovery...00.90.01 vs 00.90
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: split brain mode after reboot
- From: Carsten Aulbert <Carsten.Aulbert@xxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm: ARRAY <ignore> lines not correctly handled
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm --wait returns while array under construction?
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- [PATCH 1/2 v2] wait: add wait_event_lock_irq() interface
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- Re: System runs with RAID but fails to reboot
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm: error when using multiple ARRAY <ignore> lines in mdadm.conf
- From: NeilBrown <neilb@xxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: mdadm: use static major/minor numbers.
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Re: want-replacement got stuck?
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: mdadm: use static major/minor numbers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: RAID5 NAS Recovery...00.90.01 vs 00.90
- From: Stephen Haran <steveharan@xxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- System runs with RAID but fails to reboot
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: mdadm --fail doesn't mark device as failed?
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: mdadm --wait returns while array under construction?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- mdadm --fail doesn't mark device as failed?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] wait: add wait_event_lock_irq() interface
- From: Lukáš Czerner <lczerner@xxxxxxxxxx>
- Re: mdadm: use static major/minor numbers.
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Adaptec RAID with smartctl issue
- From: Kks Kbase <kks.kbase@xxxxxxxx>
- want-replacement got stuck?
- From: "George Spelvin" <linux@xxxxxxxxxxx>
- Re: mdadm --wait returns while array under construction?
- From: NeilBrown <neilb@xxxxxxx>
- Re: RAID5 NAS Recovery...00.90.01 vs 00.90
- From: NeilBrown <neilb@xxxxxxx>
- Re: Where can i download mdadm 3.3
- From: NeilBrown <neilb@xxxxxxx>
- Re: Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: split brain mode after reboot
- From: NeilBrown <neilb@xxxxxxx>
- Re: mdadm: use static major/minor numbers.
- From: NeilBrown <neilb@xxxxxxx>
- RAID5 NAS Recovery...00.90.01 vs 00.90
- From: Stephen Haran <steveharan@xxxxxxxxx>
- Re: [PATCH 1/2] wait: add wait_event_lock_irq() interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: mdadm --wait returns while array under construction?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- mdadm --wait returns while array under construction?
- From: Ross Boylan <ross@xxxxxxxxxxxxxxxx>
- Re: Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: [RFC 1/2]raid1: only write mismatch sectors in sync
- From: Joseph Glanville <joseph.glanville@xxxxxxxxxxxxxx>
- split brain mode after reboot
- From: Carsten Aulbert <Carsten.Aulbert@xxxxxxxxxx>
- mdadm: use static major/minor numbers.
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Re: Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: [PATCH v2] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- usefulness of drive "failed" state
- From: Michael Tokarev <mjt@xxxxxxxxxx>
- [PATCH 2/2 v4] loop: Limit the number of requests in the bio list
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- [PATCH 1/2] wait: add wait_event_lock_irq() interface
- From: Lukas Czerner <lczerner@xxxxxxxxxx>
- Re: RAID1 performance and "task X blocked for more than 120 seconds"
- From: Martijn <mailinglist@xxxxxxxxxxxxxx>
- Re: [md:for-linus 7/8] drivers/md/md.c:5297:6: sparse: symbol '__md_stop' was not declared. Should it be static?
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- Re: [md:for-linus 7/8] drivers/md/md.c:5297:6: sparse: symbol '__md_stop' was not declared. Should it be static?
- From: NeilBrown <neilb@xxxxxxx>
- [md:for-linus 7/8] drivers/md/md.c:5297:6: sparse: symbol '__md_stop' was not declared. Should it be static?
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: Dan Williams <djbw@xxxxxx>
- Re: Where can i download mdadm 3.3
- From: NeilBrown <neilb@xxxxxxx>
- Re: Re: [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [md:for-next 15/15] drivers/md/md.c:7582:6: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type
- From: NeilBrown <neilb@xxxxxxx>
- [md:for-next 15/15] drivers/md/md.c:7583:7: warning: passing argument 2 of 'test_bit' from incompatible pointer type
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- [md:for-next 15/15] drivers/md/md.c:7582:6: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v2] md: also hot remove disk from pers when hot removing
- From: NeilBrown <neilb@xxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: RAID1 performance and "task X blocked for more than 120 seconds"
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: [PATCH v2] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- [PATCH V1] md:For aborted a resync by request,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [PATCH v2] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: Dan Williams <djbw@xxxxxx>
- Re: [PATCH 1/5] md: When resync aborted,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 1/2 V1] md:Avoid write invalid address if read_seqretry returned true.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: NeilBrown <neilb@xxxxxxx>
- Re: Re: [PATCH 0/3] Add a new func to handle with clearing up for stoping dm-raid.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: [PATCH] Grow.c: fix uninitialized variables compilation-time error
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] Keep track on which kernel the test suite has run
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] imsm: Forbid spanning between multiple controllers.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] Create.c: check if freesize is equal 0
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 0/3] Add a new func to handle with clearing up for stoping dm-raid.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] Fix recommended test command
- From: NeilBrown <neilb@xxxxxxx>
- Re: Smartmontools on software RAID
- From: Johannes Truschnigg <johannes@xxxxxxxxxxxxxxx>
- Re: Smartmontools on software RAID
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Smartmontools on software RAID
- From: Anuj Goel <anuj.goel@xxxxxxxxxxxxxx>
- Re: RAID1 performance and "task X blocked for more than 120 seconds"
- From: Martijn <mailinglist@xxxxxxxxxxxxxx>
- Re: RAID1 performance and "task X blocked for more than 120 seconds"
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- RAID1 performance and "task X blocked for more than 120 seconds"
- From: Martijn <mailinglist@xxxxxxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- Where can i download mdadm 3.3
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- Re: Issue with Raid 10 super block failing
- From: Phil Turmel <philip@xxxxxxxxxx>
- Issue with Raid 10 super block failing
- From: Drew Reusser <dreusser@xxxxxxxxx>
- [PATCH] Fix recommended test command
- From: Gilles Espinasse <g.esp@xxxxxxx>
- Re: [PATCH v2] md: also hot remove disk from pers when hot removing
- From: Dan Williams <djbw@xxxxxx>
- [PATCH] Create.c: check if freesize is equal 0
- From: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
- [PATCH v2] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- Re: [PATCH] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- [PATCH] md: also hot remove disk from pers when hot removing
- From: Sebastian Riemer <sebastian.riemer@xxxxxxxxxxxxxxxx>
- a code question on raid5.c
- From: Ming Lei <Ming.Lei@xxxxxxxxxxxx>
- Re: [PATCH 1/3] md:Add a func 'dm_md_stop' for dm-raid to clear up md resources.
- From: Mike Snitzer <snitzer@xxxxxxxxxx>
- Re: Re: [PATCH 1/3] md:Add a func 'dm_md_stop' for dm-raid to clear up md resources.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [PATCH 1/3] md:Add a func 'dm_md_stop' for dm-raid to clear up md resources.
- From: Alasdair G Kergon <agk@xxxxxxxxxx>
- [PATCH 1/3] md:Add a func 'dm_md_stop' for dm-raid to clear up md resources.
- From: majianpeng <majianpeng@xxxxxxxxx>
- dm: When stoping dm-raid, it call dm_md_stop rather than md_stop to do clear-up work
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH 3/3] md: Remove EXPORT_SYMBOL_GPL(md_stop).
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH 0/3] Add a new func to handle with clearing up for stoping dm-raid.
- From: majianpeng <majianpeng@xxxxxxxxx>
- RE: Re-Validate Your Mailbox
- From: Joyce Drach <jdrach@xxxxxxxxxxxxxxxx>
- Re: Raid over USB disks and eject
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- 3.7-rc4 hang with mdadm raid10 near layout, with 4 disks, and an internal bitmap
- From: Peter Maloney <peter.maloney@xxxxxxxxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Ric Wheeler <rwheeler@xxxxxxxxxx>
- [PATCH] Grow.c: fix uninitialized variables compilation-time error
- From: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
- Slow reshape
- From: "william L'Heureux" <wil_c_will@xxxxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: question: no-bitmap RAID1 with off-site drive
- From: NeilBrown <neilb@xxxxxxx>
- Re: Raid over USB disks and eject
- From: NeilBrown <neilb@xxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: question: no-bitmap RAID1 with off-site drive
- From: Drew <drew.kay@xxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Re: Raid over USB disks and eject
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: Raid over USB disks and eject
- From: Benjamin ESTRABAUD <be@xxxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- Raid over USB disks and eject
- From: Salatiel Filho <salatiel.filho@xxxxxxxxx>
- Re: [PATCH 1/3] Align FAILED to test name to be parsable
- From: NeilBrown <neilb@xxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: Adam Goryachev <mailinglists@xxxxxxxxxxxxxxxxxxxxxx>
- Re: question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- question: no-bitmap RAID1 with off-site drive
- From: starlight.2012q4@xxxxxxxxxxx
- mdadm: error when using multiple ARRAY <ignore> lines in mdadm.conf
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- mdadm: ARRAY <ignore> lines not correctly handled
- From: Mike Frysinger <vapier@xxxxxxxxxx>
- Re: mystified by behaviour of mdadm raid5 -> raid0 conversion
- From: Geoff Attwater <geoffwater@xxxxxxxxx>
- [PATCH] Keep track on which kernel the test suite has run
- From: Gilles Espinasse <g.esp@xxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Jim Kukunas <james.t.kukunas@xxxxxxxxxxxxxxx>
- [PATCH] imsm: Forbid spanning between multiple controllers.
- From: Marcin Tomczak <marcin.tomczak@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Paul Menzel <pm.debian@xxxxxxxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Paul Menzel <pm.debian@xxxxxxxxxxxxxx>
- [PATCH] lib/raid6: Add AVX2 optimized recovery functions
- From: Jim Kukunas <james.t.kukunas@xxxxxxxxxxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- [PATCH] raid5: panic() on dma_wait_for_async_tx() error
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- RAID10 hot replacement issue
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
- [PATCH 1/2 V1] md:Avoid write invalid address if read_seqretry returned true.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Suggestions?: file copy to array grown by MDADM results in different md5sum value
- From: Blair Sonnen <blair.sonnen@xxxxxxxxx>
- Re: mystified by behaviour of mdadm raid5 -> raid0 conversion
- From: NeilBrown <neilb@xxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
- Error correction and Bad block tracking in RAID5
- From: Teng-Feng Yang <shinrairis@xxxxxxxxx>
- mystified by behaviour of mdadm raid5 -> raid0 conversion
- From: Geoff Attwater <geoffwater@xxxxxxxxx>
- Re: [dm-devel] [PATCH] Fix deadlock with request based dm and some drivers
- From: Alasdair G Kergon <agk@xxxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: [PATCH] Fix deadlock with request based dm and some drivers
- From: "Jun'ichi Nomura" <j-nomura@xxxxxxxxxxxxx>
- Re: [PATCH] Fix deadlock with request based dm and some drivers
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID5
- From: Shaohua Li <shli@xxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: Brad Campbell <lists2009@xxxxxxxxxxxxxxx>
- Re: [PATCH] Fix deadlock with request based dm and some drivers
- From: "Jun'ichi Nomura" <j-nomura@xxxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: Holger Kiehl <Holger.Kiehl@xxxxxx>
- R: Data recovery after the failure of two disks of 4
- From: Carabetta Giulio <g.carabetta@xxxxxx>
- Re: [PATCH] Fix deadlock with request based dm and some drivers
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
- Re: [PATCH] Fix deadlock with request based dm and some drivers
- From: "Jun'ichi Nomura" <j-nomura@xxxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID10
- From: Shaohua Li <shli@xxxxxxxxxx>
- [PATCH] Fix deadlock with request based dm and some drivers
- From: Jens Axboe <jaxboe@xxxxxxxxxxxx>
- Re: Re: [PATCH 1/2] md:Avoid write invalid address if read_seqretry returned true.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [PATCH 1/2] md:Avoid write invalid address if read_seqretry returned true.
- From: NeilBrown <neilb@xxxxxxx>
- Re: Re: [PATCH 1/2] md:Avoid write invalid address if read_seqretry returned true.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: [PATCH 2/2] md: Reassigned the parameters if read_seqretry returned true in func md_is_badblock.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 1/2] md:Avoid write invalid address if read_seqretry returned true.
- From: NeilBrown <neilb@xxxxxxx>
- Problem with DISCARD and RAID10
- From: Brad Campbell <brad@xxxxxxxxxxxxxxx>
- [PATCH 2/2] md: Reassigned the parameters if read_seqretry returned true in func md_is_badblock.
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH 1/2] md:Avoid write invalid address if read_seqretry returned true.
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH 0/2] Fix two bugs about forgetting to assigne to some parameters if read_seqretry returned true.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: Problem with DISCARD and RAID5
- From: Jens Axboe <axboe@xxxxxxxxx>
- Re: Problem with DISCARD and RAID5
- From: Dave Chinner <david@xxxxxxxxxxxxx>
- Re: merging printk and WARN
- From: David Sterba <dave@xxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: NeilBrown <neilb@xxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: NeilBrown <neilb@xxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: is "replaceable" in 3.2 considered stable
- From: NeilBrown <neilb@xxxxxxx>
- is "replaceable" in 3.2 considered stable
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- merging printk and WARN
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH] Remove VLAIS usage from dm-crypt
- From: Milan Broz <mbroz@xxxxxxxxxx>
- [PATCH 3/16] drivers/md/raid5.c: use WARN
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- Compilation error on today's git
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
- Re: mdadm recovery after HW failure: missing blocks at the end
- From: Sebastian Hegler <sebastian.hegler@xxxxxxxxxxxxx>
- An md1 array doesn't re-assemble after reboot (/dev/sdf2 reports being an active member for /dev/md1, but a --re-add fails).
- From: Marc MERLIN <marc@xxxxxxxxxxx>
- Re: mdadm recovery after HW failure: missing blocks at the end
- From: Sebastian Hegler <sebastian.hegler@xxxxxxxxxxxxx>
- Re: Problem with DISCARD and RAID5
- From: Shaohua Li <shli@xxxxxxxxxx>
- mdadm recovery after HW failure: missing blocks at the end
- From: Sebastian Hegler <sebastian.hegler@xxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: John Robinson <john.robinson@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: About RAID1/10 io barrier between normal io and resync/recovery io.
- From: NeilBrown <neilb@xxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- About RAID1/10 io barrier between normal io and resync/recovery io.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Problem with DISCARD and RAID5
- From: NeilBrown <neilb@xxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curtis J Blank <curt@xxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curtis J Blank <curt@xxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Roberto Spadim <rspadim@xxxxxxxxx>
- Re: 3TB drives failure rate (summary)
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: [RFC 1/2]raid1: only write mismatch sectors in sync
- From: Shaohua Li <shli@xxxxxxxxxx>
- Re: [RFC 1/2]raid1: only write mismatch sectors in sync
- From: NeilBrown <neilb@xxxxxxx>
- Re: [RFC 1/2]raid1: only write mismatch sectors in sync
- From: Shaohua Li <shli@xxxxxxxxxx>
- [PULL REQUEST] md fixes (plus UAPI reorg) for 3.7
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 3/5] md: Increase the frequency of recording checkpoint of recovery.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH V1] md:Add place to update ->recovery_cp.
- From: NeilBrown <neilb@xxxxxxx>
- 3TB drives failure rate (summary)
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Roberto Spadim <rspadim@xxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curt Blank <curt@xxxxxxxxxxxxxx>
- [PATCH] Remove VLAIS usage from dm-crypt
- From: Behan Webster <behanw@xxxxxxxxxxxxxxxxxx>
- [PATCH] Removing the use of VLAIS from the Linux Kernel
- From: Behan Webster <behanw@xxxxxxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Roberto Spadim <rspadim@xxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curtis J Blank <curt@xxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: task xfssyncd blocked while raid5 was in recovery
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: MDADM after QNAP Support disaster QNAP 859 Pro
- From: NeilBrown <neilb@xxxxxxx>
- Re: task xfssyncd blocked while raid5 was in recovery
- From: hanguozhong <hanguozhong@xxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Roberto Spadim <rspadim@xxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curt Blank <curt@xxxxxxxxxxxxxx>
- Re: Best way (only?) to setup SSD's for using TRIM
- From: Curtis J Blank <curt@xxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: RAID and LVM alignment when expanding PVs
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: Re: [PATCH 3/5] md: Increase the frequency of recording checkpoint of recovery.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: 3TB drives failure rate
- From: David Brown <david.brown@xxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: Re: [PATCH 1/5] md: When resync aborted,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: majianpeng <majianpeng@xxxxxxxxx>
- [PATCH V1] md:Add place to update ->recovery_cp.
- From: kernelmail <kedacomkernel@xxxxxxxxx>
- Re: Re: [PATCH 2/5] md:Add place to update ->recovery_cp.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: Re: [PATCH 4/5] md: Return proper error rather than EIO.
- From: majianpeng <majianpeng@xxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Peter Kieser <peter@xxxxxxxxx>
- Re: Commit "db91ff55bdf06736b" using curr_resync_completed instead of curr_resync when interrupted the resync operation
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH] MD RAID10: Fix oops when creating RAID10 arrays via dm-raid.c
- From: NeilBrown <neilb@xxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Phil Turmel <philip@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: joystick <joystick@xxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] md/raid5: Using conf->max_degraded rather than 2 to determine whether there is excess compute-disks for raid4/5/6.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 4/5] md: Return proper error rather than EIO.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 3/5] md: Increase the frequency of recording checkpoint of recovery.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 2/5] md:Add place to update ->recovery_cp.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH 1/5] md: When resync aborted,using ->curr_resync as the last completed request rather than ->curr_resync_completed.
- From: NeilBrown <neilb@xxxxxxx>
- Re: 3TB drives failure rate
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: 3TB drives failure rate
- From: Mikael Abrahamsson <swmike@xxxxxxxxx>
- Re: 3TB drives failure rate
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Miles Fidelman <mfidelman@xxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Roman Mamedov <rm@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
- Best way (only?) to setup SSD's for using TRIM
- From: Curtis J Blank <curt@xxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Joe Landman <joe.landman@xxxxxxxxx>
- Re: 3TB drives failure rate
- From: Ed W <lists@xxxxxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Michael Tokarev <mjt@xxxxxxxxxx>
- Re: 3TB drives failure rate
- From: John Robinson <john.robinson@xxxxxxxxxxx>
- Re: 3TB drives failure rate
- From: Mathias Burén <mathias.buren@xxxxxxxxx>
- 3TB drives failure rate
- From: Rainer Fügenstein <rfu@xxxxxxxxxx>
- Re: RAID and LVM alignment when expanding PVs
- From: Erez Zarum <erezzarum@xxxxxxxxx>
- Re: RAID and LVM alignment when expanding PVs
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- Re: RAID and LVM alignment when expanding PVs
- From: Erez Zarum <erezzarum@xxxxxxxxx>
- Re: RAID and LVM alignment when expanding PVs
- From: Stan Hoeppner <stan@xxxxxxxxxxxxxxxxx>
- RAID and LVM alignment when expanding PVs
- From: Erez Zarum <erezzarum@xxxxxxxxx>
[Index of Archives]
[Linux RAID Wiki]
[ATA RAID]
[Linux SCSI Target Infrastructure]
[Linux Block]
[Linux IDE]
[Linux SCSI]
[Linux Hams]
[Device Mapper]
[Kernel]
[Linux Admin]
[Linux Net]
[GFS]
[RPM]
[git]
[Yosemite Forum]
[Linux Networking]
