Re: super slow reshape speed after power failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Currently I am converting my 6x 2tb raid5 from 256 chunk down
> to 4k.

Such an (euphemism) audacious plan!

> While the reshape was running it was running around 4mb/s,
> which is slow to begin with.

Thanks for confirming how fast this is.

> Yesterday we lost power and afte the system came back up, I
> was able to bring the raid back up and running via 'export
> MDADM_GROW_ALLOW_OLD=1`.

This is a really (euphemism) strategic action!

> The current issue is that the reshape is running with only
> 700kb/s.

Thanks for confirming how fast this is.

> Any ideas?

Some, but perhaps you would not like them :-).


BTW I wonder whether the design was as (euphemism) stunning as
using 5400/5900RPM drives with 4KiB hardware sectors (such as
many current 2TB drives) without alignment, because it would be
a suitably (euphemism) extreme achievement in line with those
above.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux