John Robinson wrote:
On 01/11/2012 15:39, Miles Fidelman wrote:
John Robinson wrote:
On 01/11/2012 15:13, Miles Fidelman wrote:
Phil Turmel wrote:
I strongly encourage you to run "smartctl -l scterc /dev/sdX" for
each
of your drives. For any drive that warns that it doesn't support SCT
ERC, set the controller device timeout to 180 like so:
echo 180 >/sys/block/sdX/device/timeout
If the report says read or write ERC is disabled, run "smartctl -l
scterc,70,70 /dev/sdX" to set it to 7.0 seconds.
You then set up a boot-time script to do these adjustments at every
restart.
Sounds like a very bad idea if your drive is part of a RAID array.
Either of these - the scterc if you can, the device timeout if you
can't - are an excellent idea if you are using a desktop drive as part
of a md RAID array. Why do you think otherwise?
If I'm seeing that kind of device timeout, I want it out of my array,
and I want an alert telling me to replace it. Otherwise my server's
performance goes to s*&t.
You might not want that kind of device timeout, but as you've made
clear earlier in this thread, you wouldn't use desktop drives in md
RAID, so this doesn't really apply to you.
Except for the time I learned this the hard way.
--
In theory, there is no difference between theory and practice.
In practice, there is. .... Yogi Berra
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
