Re: How do I tell which disk failed?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Jan 7, 2013, at 11:59 PM, Ross Boylan <ross@xxxxxxxxxxxxxxxx> wrote:
>> 
> Isn't it possible there's a hardware problem, e.g., leading to a
> failure/retry cycle?

smartctl -a /dev/sda
smartctl -a /dev/sdb
smartctl -a /dev/sdc

Compare them. If there was a write failure reported by the drive, md would have marked the device faulty.

Chris Murphy--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux