Linux IDE
[Prev Page][Next Page]
- Re: [PATCH] (pata-2.6 fix queue) cmd64x: remove broken SW/MW DMA support, (continued)
- Re: Fw: [Bugme-new] [Bug 7958] New: AE_AML_PACKAGE_LIMIT is beyond end of object,
Andrew Morton
- [git patches] IDE updates for 2.6.20,
Bartlomiej Zolnierkiewicz
- [PATCH] libata bugfix: HDIO_DRIVE_TASK,
Mark Lord
- [PATCH 2.6.20] sata_vsc: use default cache line size if non-zero,
Dailey, Nate
- Impact of no_lba48{_dma} = 1 ?,
Steven Scholz
- [BUG?] ata disk running maximum at DMA33 with 2.6.20 and new pata driver, NV CK804 ide controller.,
Luigi Genoni
- [PATCH] (pata-2.6 fix queue) piix/slc90e66: more tuneproc() fixing,
Sergei Shtylyov
- Highpoint 2220,
info
- [PATCH] (2.6.20) pata_mpiix: probing cleanup (resend),
Sergei Shtylyov
- [PATCH] (2.6.20) pata_mpiix: probing cleanup,
Sergei Shtylyov
- Re: SATA PMP for 2.6.20,
Tejun Heo
- [PATCH] (2.6.20) pata_mpiix: fix PIO setup issues,
Sergei Shtylyov
- [PATCH] (2.6.20) pata_oldpiix: fix PIO2 underclocking,
Sergei Shtylyov
- [PATCH] libata: Report PIO/DMA status when overriding set_mode,
Alan
- [PATCH] libata: Early CFA adapters are not required to support mode setting,
Alan
- [PATCH] libata: IORDY handling, quiet handling,
Alan
- [PATCH] ata: Add defines for the iordy bits,
Alan
- [PATCH] libata: Add a host flag to indicate lack of IORDY capability,
Alan
- [PATCH] libata-eh: Add a simple mechanism for silencing error reporting,
Alan
- [PATCH] Kconfig: clarify ATA_PIIX description,
Alan
- [PATCH libata-dev#upstream 1/2] libata: export several functions,
Tejun Heo
- [PATCH libata-dev#upstream-fixes] pata_amd: fix an obvious bug in cable detection,
Tejun Heo
- [PATCH] amd74xx: don't configure udma mode higher than BIOS did,
Tejun Heo
[PATCH] ide: fix drive side 80c cable check,
Tejun Heo
[PATCH libata-dev#upstream-fixes] libata: fix drive side 80c cable check,
Tejun Heo
[PATCH -mm] sata_nv: propagate ata_pci_device_do_resume return value,
Robert Hancock
[PATCH -mm] sata_nv: wait for response on entering/leaving ADMA mode,
Robert Hancock
[PATCH] sata_promise: new EH conversion for 20619 chips,
Mikael Pettersson
green light for kernel 2.6.20-rc7-git1,
Uwe Bugla
Problems (and confusions) with Intel ICH7 SATA controller,
Florian Echtler
[PATCH] (2.6.20-rc7) cmd64x: fix PIO mode setup,
Sergei Shtylyov
[PATCH] (2.6.20) cmd64x: fix PIO mode setup (take 3),
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: add/fix enablebits,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: interrupt status fixes (resend),
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: procfs code fixes/cleanups,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x:,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: use interrupt status from MRDMODE register,
Sergei Shtylyov
- Re: [PATCH] (pata-2.6 fix queue) cmd64x: use interrupt status from MRDMODE register,
Bartlomiej Zolnierkiewicz
- [PATCH pata-2.6] cmd64x: use interrupt status from MRDMODE register (take 2),
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] hpt366: fix kernel oops with HPT302N,
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] aec62xx: fix PIO/DMA setup issues,
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] cmd64x: init. code cleanup,
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] cmd64x: init. code cleanup,
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] aec62xx: rework init_setup_aec6x80(),
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] aec62xx: remove init_dma() method,
Sergei Shtylyov
- [PATCH pata-2.6 fix queue] aec62xx: kill speedproc() method wrapper,
Sergei Shtylyov
- [PATCH pata-2.6] aec62xx: remove init_dma() method (take 2),
Sergei Shtylyov
- [PATCH pata-2.6] aec62xx: kill speedproc() method wrapper (take 2),
Sergei Shtylyov
- [PATCH] cmd64x: don't clear the other channels interrupt,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: fix recovery time calculation (take 2),
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: fix primary channel address setup time,
Sergei Shtylyov
[PATCH] (pata-2.6 fix queue) cmd64x: add back MWDMA support,
Sergei Shtylyov
[PATCH] (2.6.20-rc7) alim15x3: fix PIO mode setup,
Sergei Shtylyov
[QUESTION] ATA: abnormal status 0x80 on port 0xCC07,
Michal Piotrowski
Re: [QUESTION] ATA: abnormal status 0x80 on port 0xCC07,
Jeff Garzik
Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks,
Bartlomiej Zolnierkiewicz
Re: [PATCH 11/15] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void,
Bartlomiej Zolnierkiewicz
[ANNOUNCE] IDE quilt tree updated,
Bartlomiej Zolnierkiewicz
libata_uli puts second channel to PIO4 on 2.6.18,
Grzegorz Kulewski
2.6.20-rc7: known regressions (v2) (part 1),
Adrian Bunk
[PATCH] libata: (round 5) add support for ATA_16 on ATAPI,
Mark Lord
[PATCH] RESEND: libata: check cdb len per dev instead of per host,
Mark Lord
[PATCH] ata_piix: fix pio/mwdma programming (for testing, don't apply),
Tejun Heo
[PATCHSET] libata: reimplement reset sequencing,
Tejun Heo
asdf,
Tejun Heo
[PATCH] libata: reduce ATA command timeout to 7secs,
Tejun Heo
[PATCH] sata_inic162x: fix a few glitches in hardreset,
Tejun Heo
[PATCH] libata: add 150ms between completion of hardreset and status checking,
Tejun Heo
[PATCH libata-dev#upstream-fixes] ahci/pata_jmicron: fix JMicron quirk,
Tejun Heo
2.6.20-rc7: known regressions,
Adrian Bunk
Problem with Samsung SH-183A and VIA Sata Controller,
Nils Lavesson
Problem: 2.6.20-rc7 sata_via: SATA-DVD-Writer doesn't work properly,
juergen . metzdorf
[PATCH] libata: (round 4) add support for ATA_16 on ATAPI,
Mark Lord
[PATCH] libata: check cdb len per dev instead of per host,
Mark Lord
Serious bug in sata_sil module in 2.6.19.2?,
Florian Effenberger
no DRQ after issuing MULTWRITE_EXT ?,
Steven Scholz
Test results new PATA driver for serverworks (OSB4) chipset,
Ingo Oeser
[PATCH] ide-floppy: Fix unformatted media crash,
Alan
[PATCH] libata: Fix (hopefully) all the remaining problems with devices failing setup/identify,
Alan
Implement the technote about promise/maxtor drives,
Alan
Add suport for Marvell 88SE6121 in ahci,
Jose Alberto Reguero
[PATCH] iomap: iomap should be in obj-y not in lib-y,
Tejun Heo
[PATCH 1/1] libata: rearrange dmesg info to add full ATA revision,
Eric D. Mudama
[PATCH] scsi_lib.c: continue after MEDIUM_ERROR,
Mark Lord
Re: [2.6.20-rc6] pktcdvd doesn't work,
Luca Tettamanti
[PATCH] sl82c105: DMA support fixes,
Sergei Shtylyov
[PATCH 1/1] libata: dump full ATA firmware revision to dmesg,
Eric D. Mudama
[PATCH] pata_sl82c105: wrong assumptions about compatible PIO modes,
Sergei Shtylyov
[PATCH 1/1] libata: Initialize nbytes for internal sg commands,
Brian King
Recent AHCI drivers do not work with VIA VT8251 controllers (regression in 2.6.19 from 2.6.18),
Simon Farnsworth
HPA and failed opcode was: 0x37 ?,
Steven Scholz
[PATCH -mm] jmicron: 40/80pin primary detection,
ethanhsiao
[PATCH] libata-scsi: ata_task_ioctl should return ATA registers (RESEND),
David Milburn
sil_24 PMP performance issue.,
Richard Scobie
[PATCH] ata_if_xfermask() word 51 fix,
Lennert Buytenhek
[PATCH RFC] sd: spin down disks on removal or power-down,
Robert Hancock
[PATCH] libata: fix translation for START STOP UNIT,
Robert Hancock
[PATCH -mm] sata_nv: use ADMA for NODATA commands,
Robert Hancock
Re: Boot problems with pata_via driver,
Adrian Bunk
[PATCH] siimage: PIO1/2 taskfile transfer overclocking fix,
Sergei Shtylyov
[-mm patch] fix CONFIG_SATA_SIS=y compile error,
Adrian Bunk
[PATCH] pata_sil680: PIO1 taskfile transfers overclocking fix (repost),
Sergei Shtylyov
[PATCH] pata_sil680: PIO1 taskfile transfers oveclocking fix,
Sergei Shtylyov
[patch] use __u8 rather than u8 in userspace SIZE defines in hdreg.h,
Mike Frysinger
[PATCH] libata: add a dummy set_mode() in pata_pcmcia,
Arnd Bergmann
Read error generated oops.,
kenneth johansson
2.6.20-rc6: known unfixed regressions (v2) (part 2),
Adrian Bunk
Re: mm snapshot broken-out-2007-01-26-00-36.tar.gz uploaded,
Michal Piotrowski
[git patches] IDE fixes for 2.6.20-rc6,
Bartlomiej Zolnierkiewicz
[PATCH] ahci: Marvell 6145 SATA support (preliminary),
Jeff Garzik
[PATCH] ahci: port_no should be used when clearing IRQ in ahci_thaw(),
Tejun Heo
[git patches, 90% resend] libata fixes,
Jeff Garzik
2.6.20-rc6: known unfixed regressions (part 2),
Adrian Bunk
[PATCH] libata: fix ata_eh_suspend() return value,
Tejun Heo
sata driver fails to work after resume from S3,
Zhang Rui
[PATCH 3/3] libata: PATA driver for Celleb,
Akira Iguchi
[PATCH 2/3] libata: add another IRQ calls (libata drivers),
Akira Iguchi
[PATCH 1/3] libata: add another IRQ calls (core and headers),
Akira Iguchi
[PATCHSET] libata: PATA driver for Celleb,
Akira Iguchi
[PATCH v1] sata_mv: conversion to new EH,
Jeff Garzik
[PATCH] ahci: use 0x80 as wait stat value instead of 0xff,
Tejun Heo
[PATCH] remove duplicate ids from ata_piix,
Greg KH
Re: [PATCH] libata-sff: Don't call bmdma_stop on non DMA capable controllers,
Jeff Garzik
Failed to set xfermode on LITE-ON LTR-40125S,
John Williams
Re: Linux 2.6 SATA NCQ support,
Tejun Heo
Re: Linux 2.6 SATA NCQ support,
Jeff Garzik
[PATCH] sata_via: don't diddle with ATA_NIEN in ->freeze,
Tejun Heo
[PATCH] libata: share PIO limits among devices sharing a channel,
Tejun Heo
2.6.20-rc5: known regressions with patches (v3),
Adrian Bunk
2.6.20-rc5: known unfixed regressions (v3) (part 2),
Adrian Bunk
More ATA docs uploaded,
Jeff Garzik
Possible performance issue with sata_sil og Gigabyte i-Ram,
Oddbjørn Kvalsund
[Index of Archives]
[Kernel Announce]
[Kernel Newbies]
[Linux RAID]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
