Re: Nvidia cable detection problems (was [PATCH] amd74xx: don't configure udma mode higher than BIOS did)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/5/07, Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote:
> > Well we can certainly do some of that if ACPI is present and active. In
> > particular since _GTM will give us current modes allowing for hotplug and
> > post BIOS boot kexec etc it ought to be safe to do Tejun's hack that way.
> > We could even probe UDMA3+ capable devices by doing _STM to a high mode
> > and _GTM to determine the cable type 8)

agreed

New look at the issue:

Since we are already using UDMA mode set by BIOS to determine if 80c cable
is present so why not also use it to determine if the 40c cable is present?

I mean just ignoring AMD_CABLE_DETECT register for NVIDIA devices.

2-lines change and we wouldn't have to deal with ACPI at ell.

What do you think?

Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux