On Thursday 15 February 2007 20:17, Sergei Shtylyov wrote: > Fix several issues with the driver's procfs output: > > - when testing if channel is enabled, the code looks at the "simplex" bits, not > at the real enable bits -- add #define for the primary channel enable bit; > > - UltraDMA modes 0, 1, 3 for slave drive reported incorrectly due to using the > master drive's clock cycle resolution bit. > > While at it, also perform some cleanups: > > - don't read from the registers which are not used for dump; > > - correct the chipset names (from CMDxxx to PCI-xxx); > > - rework UltraDMA mode dump code; > > - remove PIO mode dump code that has never been finished; > > - remove the duplicate interrupt status dump (the MRDMODE register bits mirror > those in the CFR and ARTTIM23 registers); > > - add spaces in the ?: operators... > > Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> applied - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
