> hda: status timeout: status=0xd0 { Busy }
> ide: failed opcode was: unknown
> hda: no DRQ after issuing MULTWRITE_EXT
> ide0: unexpected interrupt, status=0x80, count=1
> ide0: reset: success
>
> ) sometimes when rqsize is set to 65536 altough I only do PIO transfer?
If your hardware support for LBA48 is broken and you've not disabled
LBA48 then your hardware will do many strange things.
If however the hwif->no_lba48 is set then drive->addressing ends up as 0
so LBA48 commands should never be issued and rqsize should never get >
256.
Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
