[Cr*p, forgot both the sign-off and cut-off! :-)]
MPIIX has only single channel IDE which can be configured for either primary or
secondary legacy I/O ports and IRQ. So, get rid of the unneeded second probe
entry in mpiix_init_one() and of the invalid (but unused anyway) enable bits in
mpiix_pre_reset().
Warning: this cleanup has only been compile-tested...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
drivers/ata/pata_mpiix.c | 63 ++++++++++++++++++++---------------------------
1 files changed, 27 insertions(+), 36 deletions(-)
Index: linux-2.6/drivers/ata/pata_mpiix.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_mpiix.c
+++ linux-2.6/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.4"
+#define DRV_VERSION "0.7.5"
enum {
IDETIM = 0x6C, /* IDE control register */
@@ -49,12 +49,9 @@ enum {
static int mpiix_pre_reset(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- static const struct pci_bits mpiix_enable_bits[] = {
- { 0x6D, 1, 0x80, 0x80 },
- { 0x6F, 1, 0x80, 0x80 }
- };
+ static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 };
- if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+ if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
@@ -202,10 +199,9 @@ static struct ata_port_operations mpiix_
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* Single threaded by the PCI probe logic */
- static struct ata_probe_ent probe[2];
+ static struct ata_probe_ent probe;
static int printed_version;
u16 idetim;
- int enabled;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
@@ -224,37 +220,32 @@ static int mpiix_init_one(struct pci_dev
without BARs set fools the setup. #2 If you pci_disable_device
the MPIIX your box goes castors up */
- INIT_LIST_HEAD(&probe[0].node);
- probe[0].dev = pci_dev_to_dev(dev);
- probe[0].port_ops = &mpiix_port_ops;
- probe[0].sht = &mpiix_sht;
- probe[0].pio_mask = 0x1F;
- probe[0].irq = 14;
- probe[0].irq_flags = SA_SHIRQ;
- probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- probe[0].n_ports = 1;
- probe[0].port[0].cmd_addr = 0x1F0;
- probe[0].port[0].ctl_addr = 0x3F6;
- probe[0].port[0].altstatus_addr = 0x3F6;
-
- /* The secondary lurks at different addresses but is otherwise
- the same beastie */
-
- INIT_LIST_HEAD(&probe[1].node);
- probe[1] = probe[0];
- probe[1].irq = 15;
- probe[1].port[0].cmd_addr = 0x170;
- probe[1].port[0].ctl_addr = 0x376;
- probe[1].port[0].altstatus_addr = 0x376;
+ INIT_LIST_HEAD(&probe.node);
+ probe.dev = pci_dev_to_dev(dev);
+ probe.port_ops = &mpiix_port_ops;
+ probe.sht = &mpiix_sht;
+ probe.pio_mask = 0x1F;
+ probe.irq_flags = SA_SHIRQ;
+ probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ probe.n_ports = 1;
+
+ /* See if it's primary or secondary channel... */
+ if (idetim & SECONDARY) {
+ probe.irq = 15;
+ probe.port[0].cmd_addr = 0x170;
+ probe.port[0].ctl_addr = 0x376;
+ probe.port[0].altstatus_addr = 0x376;
+ } else {
+ probe.irq = 14;
+ probe.port[0].cmd_addr = 0x1F0;
+ probe.port[0].ctl_addr = 0x3F6;
+ probe.port[0].altstatus_addr = 0x3F6;
+ }
/* Let libata fill in the port details */
- ata_std_ports(&probe[0].port[0]);
- ata_std_ports(&probe[1].port[0]);
+ ata_std_ports(&probe.port[0]);
- /* Now add the port that is active */
- enabled = (idetim & SECONDARY) ? 1 : 0;
-
- if (ata_device_add(&probe[enabled]))
+ if (ata_device_add(&probe))
return 0;
return -ENODEV;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
