Hello, I've got a VIA VT8251 AHCI controller, driving two Maxtor SATA disks. Under Linux 2.6.18.5, it works; using 2.6.19.1, it fails to work (bug report at http://bugzilla.kernel.org/show_bug.cgi?id=7589 - note that pci=nomsi does not fix things for me, as I still get no interrupts). Git bisect points to the following commit as the cause of the problem: commit 0be0aa98985dfec42502c0d0af2a1baff9bdb19f Author: Tejun Heo <htejun@xxxxxxxxx> Date: Wed Jul 26 15:59:26 2006 +0900 [PATCH] libata: improve driver initialization and deinitialization I've attempted to reverse this patch against 2.6.19.1, but development's moved on too far, and it fails badly. I've also used the minimal shell environment in my initrd (the EVMS initrd) to confirm that this patch is the one that stops the VIA VT8251 from interrupting. Is there anything I can do to improve the chances of getting this fixed for 2.6.20 or 2.6.21? I've attached a dmesg from 2.6.18.5, lspci -vvvvv output, and my 2.6.18 .config, in case they point to anything. -- Thanks in advance, Simon Farnsworth
# # Automatically generated make config: don't edit # Linux kernel version: 2.6.18.5 # Tue Jan 30 15:35:10 2007 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 # CONFIG_SECCOMP is not set CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 CONFIG_REORDER=y CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y # # Power management options # CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set # CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=y # # shared options # # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y # # TCP congestion control # CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=y CONFIG_VLAN_8021Q=y # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_AHCI=y # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set # CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_CRYPT is not set CONFIG_DM_SNAPSHOT=y CONFIG_DM_MIRROR=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set CONFIG_VIA_RHINE=y CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_PIIX4=m CONFIG_I2C_ISA=m CONFIG_I2C_NFORCE2=m # CONFIG_I2C_OCORES is not set CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PROSAVAGE=m CONFIG_I2C_SAVAGE4=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_STUB=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m CONFIG_I2C_PCA_ISA=m # # Miscellaneous I2C Chip support # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_MAX6875=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # # Hardware Monitoring support # CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_ASB100=m CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_FSCHER=m CONFIG_SENSORS_FSCPOS=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM63=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_SMSC47M1=m # CONFIG_SENSORS_SMSC47M192 is not set CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m # CONFIG_SENSORS_W83791D is not set CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_HDAPS=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # # CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # CONFIG_IPATH_CORE is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # # CONFIG_RTC_CLASS is not set # # DMA Engine support # # CONFIG_DMA_ENGINE is not set # # DMA Clients # # # DMA Devices # # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Instrumentation Support # # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_FRAME_POINTER is not set # CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_X86_64=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y
[ 0.000000] Bootdata ok (command line is root=/dev/evms/root ramdisk=8192) [ 0.000000] Linux version 2.6.18.5 (root@rimmer) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #1 Tue Jan 30 15:41:07 GMT 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable) [ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa970 [ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x06000620 MSFT 0x00000097) @ 0x000000003ffd0100 [ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x06000620 MSFT 0x00000097) @ 0x000000003ffd0290 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000620 MSFT 0x00000097) @ 0x000000003ffd0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x06000620 MSFT 0x00000097) @ 0x000000003ffd03f0 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000620 MSFT 0x00000097) @ 0x000000003ffde040 [ 0.000000] ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 [ 0.000000] On node 0 totalpages: 257408 [ 0.000000] DMA zone: 2935 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 254473 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:15 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists. Total pages: 257408 [ 0.000000] Kernel command line: root=/dev/evms/root ramdisk=8192 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 0.000000] time.c: Detected 2000.180 MHz processor. [ 39.595582] Console: colour dummy device 80x25 [ 39.596564] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 39.597828] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 39.597988] Checking aperture... [ 39.597994] CPU 0: aperture @ dc000000 size 64 MB [ 39.609630] Memory: 1024444k/1048384k available (2118k kernel code, 23040k reserved, 1153k data, 176k init) [ 39.755229] Calibrating delay using timer specific routine.. 4001.89 BogoMIPS (lpj=20009467) [ 39.755269] Mount-cache hash table entries: 256 [ 39.755355] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 39.755362] CPU: L2 Cache: 512K (64 bytes/line) [ 39.755380] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 39.755392] ACPI: Core revision 20060707 [ 39.857830] Using local APIC timer interrupts. [ 39.907739] result 12501142 [ 39.907743] Detected 12.501 MHz APIC timer. [ 39.914940] testing NMI watchdog ... OK. [ 40.014853] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 40.123754] Freeing initrd memory: 3074k freed [ 40.125911] NET: Registered protocol family 16 [ 40.125974] ACPI: bus type pci registered [ 40.129024] PCI: Using MMCONFIG at e0000000 [ 40.129034] PCI: No mmconfig possible on device 0:0 [ 40.129040] PCI: No mmconfig possible on device 0:1 [ 40.129056] PCI: No mmconfig possible on device 0:f [ 40.129061] PCI: No mmconfig possible on device 0:10 [ 40.129067] PCI: No mmconfig possible on device 0:11 [ 40.129072] PCI: No mmconfig possible on device 0:12 [ 40.129077] PCI: No mmconfig possible on device 0:13 [ 40.129085] PCI: No mmconfig possible on device 0:18 [ 40.129096] PCI: No mmconfig possible on device 1:0 [ 40.129206] PCI: No mmconfig possible on device 5:d [ 40.134354] ACPI: Interpreter enabled [ 40.134360] ACPI: Using IOAPIC for interrupt routing [ 40.135390] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 40.135396] PCI: Probing PCI hardware (bus 00) [ 40.139982] Boot video device is 0000:01:00.0 [ 40.140342] PCI: Transparent bridge - 0000:00:13.1 [ 40.140371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 40.162247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 40.162548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] [ 40.162803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] [ 40.162923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] [ 40.164235] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 40.164499] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 40.164728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 40.164952] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 40.165179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 40.165405] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 40.165632] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 40.165859] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 40.165937] Linux Plug and Play Support v0.97 (c) Adam Belay [ 40.165951] pnp: PnP ACPI init [ 40.171960] pnp: PnP ACPI: found 14 devices [ 40.172056] SCSI subsystem initialized [ 40.172091] usbcore: registered new driver usbfs [ 40.172117] usbcore: registered new driver hub [ 40.172189] PCI: Using ACPI for IRQ routing [ 40.172195] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 40.172307] agpgart: Detected AGP bridge 0 [ 40.174261] agpgart: AGP aperture is 64M @ 0xdc000000 [ 40.174284] PCI-DMA: Disabling IOMMU. [ 40.175089] pnp: 00:07: ioport range 0xc00-0xc0f has been reserved [ 40.175096] pnp: 00:07: ioport range 0xd00-0xd0f has been reserved [ 40.175102] pnp: 00:07: ioport range 0xa20-0xa2f has been reserved [ 40.175107] pnp: 00:07: ioport range 0xa30-0xa3f has been reserved [ 40.175294] PCI: Bridge: 0000:00:01.0 [ 40.175299] IO window: disabled. [ 40.175306] MEM window: fc900000-fe9fffff [ 40.175312] PREFETCH window: cbf00000-dbefffff [ 40.175319] PCI: Bridge: 0000:02:00.0 [ 40.175323] IO window: disabled. [ 40.175327] MEM window: disabled. [ 40.175331] PREFETCH window: disabled. [ 40.175335] PCI: Bridge: 0000:02:00.1 [ 40.175339] IO window: disabled. [ 40.175343] MEM window: disabled. [ 40.175347] PREFETCH window: disabled. [ 40.175351] PCI: Bridge: 0000:00:13.0 [ 40.175355] IO window: disabled. [ 40.175361] MEM window: 50000000-500fffff [ 40.175367] PREFETCH window: disabled. [ 40.175373] PCI: Bridge: 0000:00:13.1 [ 40.175378] IO window: c000-cfff [ 40.175384] MEM window: fea00000-feafffff [ 40.175391] PREFETCH window: 50100000-501fffff [ 40.175407] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 40.175412] PCI: Enabling device 0000:00:13.0 (0104 -> 0106) [ 40.175419] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 40.175427] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.175434] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 40.175440] PCI: Setting latency timer of device 0000:00:13.1 to 64 [ 40.175458] NET: Registered protocol family 2 [ 40.244328] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 40.244570] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 40.245383] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 40.245789] TCP: Hash tables configured (established 131072 bind 65536) [ 40.245795] TCP reno registered [ 40.246616] Total HugeTLB memory allocated, 0 [ 40.246753] Initializing Cryptographic API [ 40.246760] io scheduler noop registered [ 40.246772] io scheduler cfq registered (default) [ 40.247236] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 40.247240] pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS [ 40.247268] assign_interrupt_mode Found MSI capability [ 40.247303] Allocate Port Service[0000:02:00.0:pcie00] [ 40.247332] Allocate Port Service[0000:02:00.0:pcie01] [ 40.247352] Allocate Port Service[0000:02:00.0:pcie03] [ 40.247375] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 40.247378] pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS [ 40.247401] assign_interrupt_mode Found MSI capability [ 40.247422] Allocate Port Service[0000:02:00.1:pcie00] [ 40.247445] Allocate Port Service[0000:02:00.1:pcie01] [ 40.247464] Allocate Port Service[0000:02:00.1:pcie03] [ 40.247535] GSI 16 sharing vector 0xC1 and IRQ 16 [ 40.247541] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 [ 40.247588] nvidiafb: Device ID: 10de0110 [ 40.279287] nvidiafb: Unable to detect display type... [ 40.279293] ...Using default of CRT [ 40.279297] nvidiafb: Unable to detect which CRTCNumber... [ 40.279301] ...Defaulting to CRTCNumber 0 [ 40.279305] nvidiafb: Using CRT on CRTC 0 [ 40.279521] nvidiafb: MTRR set to ON [ 40.280725] Console: switching to colour frame buffer device 80x30 [ 40.281669] nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0xD0000000) [ 40.281724] ACPI: Power Button (FF) [PWRF] [ 40.281768] ACPI: Sleep Button (CM) [SLPB] [ 40.281799] ACPI: Power Button (CM) [PWRB] [ 40.300134] Real Time Clock Driver v1.12ac [ 40.300382] Linux agpgart interface v0.101 (c) Dave Jones [ 40.300625] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 40.301297] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 40.302165] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 40.302721] RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize [ 40.303631] via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker [ 40.304216] GSI 17 sharing vector 0xC9 and IRQ 17 [ 40.304772] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201 [ 40.306330] eth0: VIA Rhine II at 0xfebff400, 00:17:31:b2:f0:12, IRQ 201. [ 40.307801] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. [ 40.309456] libata version 2.00 loaded. [ 40.309478] ahci 0000:00:0f.0: version 2.0 [ 40.309494] GSI 18 sharing vector 0xD1 and IRQ 18 [ 40.310315] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 209 [ 45.344584] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 45.346563] ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part [ 45.347752] ata1: SATA max UDMA/133 cmd 0xFFFFC20000006D00 ctl 0x0 bmdma 0x0 irq 217 [ 45.350089] ata2: SATA max UDMA/133 cmd 0xFFFFC20000006D80 ctl 0x0 bmdma 0x0 irq 217 [ 45.352576] ata3: SATA max UDMA/133 cmd 0xFFFFC20000006E00 ctl 0x0 bmdma 0x0 irq 217 [ 45.355126] ata4: SATA max UDMA/133 cmd 0xFFFFC20000006E80 ctl 0x0 bmdma 0x0 irq 217 [ 45.357715] scsi0 : ahci [ 45.893540] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 45.896108] ata1.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 NCQ (depth 0/32) [ 45.898764] ata1.00: ata1: dev 0 multi count 16 [ 45.902249] ata1.00: configured for UDMA/133 [ 45.903563] scsi1 : ahci [ 46.232882] ata2: SATA link down (SStatus 0 SControl 300) [ 46.234174] scsi2 : ahci [ 46.771864] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 46.774389] ata3.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 NCQ (depth 0/32) [ 46.776907] ata3.00: ata3: dev 0 multi count 16 [ 46.780334] ata3.00: configured for UDMA/133 [ 46.781575] scsi3 : ahci [ 47.111207] ata4: SATA link down (SStatus 0 SControl 300) [ 47.112495] Vendor: ATA Model: Maxtor 7V250F0 Rev: VA11 [ 47.113960] Type: Direct-Access ANSI SCSI revision: 05 [ 47.116381] Vendor: ATA Model: Maxtor 7V250F0 Rev: VA11 [ 47.117792] Type: Direct-Access ANSI SCSI revision: 05 [ 47.120173] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) [ 47.121314] sda: Write Protect is off [ 47.122419] sda: Mode Sense: 00 3a 00 00 [ 47.122429] SCSI device sda: drive cache: write back [ 47.123550] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) [ 47.124626] sda: Write Protect is off [ 47.125675] sda: Mode Sense: 00 3a 00 00 [ 47.125684] SCSI device sda: drive cache: write back [ 47.126715] sda: sda1 sda2 sda3 [ 47.148156] sd 0:0:0:0: Attached scsi disk sda [ 47.149202] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) [ 47.150226] sdb: Write Protect is off [ 47.151236] sdb: Mode Sense: 00 3a 00 00 [ 47.151246] SCSI device sdb: drive cache: write back [ 47.152259] SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) [ 47.153260] sdb: Write Protect is off [ 47.154263] sdb: Mode Sense: 00 3a 00 00 [ 47.154272] SCSI device sdb: drive cache: write back [ 47.155294] sdb: sdb1 sdb2 sdb3 [ 47.173070] sd 2:0:0:0: Attached scsi disk sdb [ 47.174116] GSI 19 sharing vector 0xE1 and IRQ 19 [ 47.175106] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 225 [ 47.177098] PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 1 [ 47.178285] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 47.179395] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 47.181488] ehci_hcd 0000:00:10.4: debug port 1 [ 47.182542] ehci_hcd 0000:00:10.4: irq 225, io mem 0xfebff800 [ 47.183579] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 47.185717] usb usb1: configuration #1 chosen from 1 choice [ 47.186784] hub 1-0:1.0: USB hub found [ 47.187829] hub 1-0:1.0: 4 ports detected [ 47.290925] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 47.290953] USB Universal Host Controller Interface driver v3.0 [ 47.291998] GSI 20 sharing vector 0xE9 and IRQ 20 [ 47.293012] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 233 [ 47.295079] PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9 [ 47.296161] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 47.297250] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 47.299395] uhci_hcd 0000:00:10.0: irq 233, io base 0x0000e080 [ 47.300571] usb usb2: configuration #1 chosen from 1 choice [ 47.301683] hub 2-0:1.0: USB hub found [ 47.302766] hub 2-0:1.0: 2 ports detected [ 47.410700] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 225 [ 47.412862] PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 1 [ 47.413995] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 47.415141] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 47.417346] uhci_hcd 0000:00:10.1: irq 225, io base 0x0000e000 [ 47.418543] usb usb3: configuration #1 chosen from 1 choice [ 47.419669] hub 3-0:1.0: USB hub found [ 47.420776] hub 3-0:1.0: 2 ports detected [ 47.949606] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 48.124979] usb 2-2: configuration #1 chosen from 1 choice [ 48.442349] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x300C [ 48.444533] usbcore: registered new driver usblp [ 48.445610] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 48.446699] Initializing USB Mass Storage driver... [ 48.447820] usbcore: registered new driver usb-storage [ 48.448925] USB Mass Storage support registered. [ 48.450034] usbcore: registered new driver usbhid [ 48.451117] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 48.452232] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 48.453286] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 48.454507] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 48.455570] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 48.456618] mice: PS/2 mouse device common for all mice [ 48.457619] md: raid1 personality registered for level 1 [ 48.458616] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 48.459614] md: bitmap version 4.39 [ 48.460698] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx [ 48.462756] TCP bic registered [ 48.463718] Initializing IPsec netlink socket [ 48.464685] NET: Registered protocol family 1 [ 48.465653] NET: Registered protocol family 10 [ 48.466651] IPv6 over IPv4 tunneling driver [ 48.467610] NET: Registered protocol family 17 [ 48.468502] NET: Registered protocol family 15 [ 48.469382] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx> [ 48.470273] All bugs added by David S. Miller <davem@xxxxxxxxxx> [ 48.471210] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 48.475435] powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 [ 48.476326] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 48.477207] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x6 [ 48.478118] ACPI: (supports S0 S1 S3 S4 S5) [ 48.479099] md: Autodetecting RAID arrays. [ 48.479933] md: autorun ... [ 48.480750] md: ... autorun DONE. [ 48.481614] RAMDISK: Compressed image found at block 0 [ 48.601865] VFS: Mounted root (ext2 filesystem). [ 48.633855] input: AT Translated Set 2 keyboard as /class/input/input0 [ 48.985690] md: bind<dm-0> [ 48.986975] md: bind<dm-1> [ 48.988621] raid1: raid set md0 active with 2 out of 2 mirrors [ 48.990328] md: bind<dm-3> [ 48.991593] md: bind<dm-4> [ 48.993143] raid1: raid set md2 active with 2 out of 2 mirrors [ 48.995626] md: bind<dm-13> [ 48.996846] md: bind<dm-14> [ 48.998412] raid1: raid set md1 active with 2 out of 2 mirrors [ 49.014294] kjournald starting. Commit interval 5 seconds [ 49.015370] EXT3-fs: mounted filesystem with ordered data mode. [ 49.227257] Freeing unused kernel memory: 176k freed [ 51.681391] EXT3 FS on dm-12, internal journal [ 52.786372] kjournald starting. Commit interval 5 seconds [ 52.790466] EXT3 FS on dm-6, internal journal [ 52.790470] EXT3-fs: mounted filesystem with ordered data mode. [ 52.803808] kjournald starting. Commit interval 5 seconds [ 52.810518] EXT3 FS on dm-17, internal journal [ 52.810522] EXT3-fs: mounted filesystem with ordered data mode. [ 52.834219] kjournald starting. Commit interval 5 seconds [ 52.840364] EXT3 FS on dm-19, internal journal [ 52.840367] EXT3-fs: mounted filesystem with ordered data mode. [ 52.855560] kjournald starting. Commit interval 5 seconds [ 52.860321] EXT3 FS on dm-21, internal journal [ 52.860325] EXT3-fs: mounted filesystem with ordered data mode. [ 52.982157] Adding 1052236k swap on /dev/evms/swap. Priority:-1 extents:1 across:1052236k [ 58.828005] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 8 Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] HyperTransport: Slave or Primary Interface !!! Possibly incomplete decoding Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit Revision ID: 1.02 Capabilities: [58] #00 [0000] 00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc900000-fe9fffff Prefetchable memory behind bridge: cbf00000-dbefffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 SATA controller: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller (prog-if 01 [AHCI 1.0]) Subsystem: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin B routed to IRQ 217 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [e0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+ Address: fee00000 Data: 40d9 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 233 Region 4: I/O ports at e080 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 225 Region 4: I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 225 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [88] Debug port 00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge Subsystem: VIA Technologies, Inc. VT8251 PCI to ISA Bridge Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller Subsystem: VIA Technologies, Inc. VT8251 Ultra VLINK Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) Subsystem: ASUSTeK Computer Inc. Unknown device 80ed Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 201 Region 0: I/O ports at d800 [size=256] Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: 50000000-500fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 50100000-501fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit Revision ID: 1.02 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA]) Subsystem: Guillemot Corporation Unknown device 7100 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 193 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fe9f0000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port 1 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 40b1 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [180] Unknown (5) 02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot-) IRQ 0 Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x0 Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee00000 Data: 40b9 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [180] Unknown (5) 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller Subsystem: ASUSTeK Computer Inc. Unknown device 818f Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at 50000000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [70] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 05:0d.0 SCSI storage controller: Adaptec AIC-7861 (rev 03) Subsystem: Adaptec AHA-2940AU Single Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at c800 [size=256] Region 1: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 50100000 [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Attachment:
signature.asc
Description: Digital signature
