Linux Device Tree
[Prev Page][Next Page]
- Re: (subset) [PATCH v3 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M3
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH v3 07/10] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: (subset) [PATCH v3 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 4/4] docs: iio: ad7380: add adaq4370-4 and adaq4380-4
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 4/4] iio: imu: bmi270: Add support for BMI260
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- [PATCH v4 3/4] dt-bindings: iio: imu: bmi270: Add Bosch BMI260
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- [PATCH v4 2/4] iio: imu: bmi270: Add scale and sampling frequency to BMI270 IMU
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- [PATCH v4 1/4] iio: imu: bmi270: Add triggered buffer for Bosch BMI270 IMU
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- [PATCH v4 0/4] Add i2c driver for Bosch BMI260 IMU
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 5/5] riscv: dts: starfive: add DeepComputing FML13V01 board device tree
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
- Re: [PATCH v6 2/5] riscv: dts: starfive: jh7110-common: move usb0 config to board dts
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
- Re: [PATCH v6 1/5] riscv: dts: starfive: jh7110-common: revised device node
- From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: display: bridge: sn65dsi83: Add interrupt
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v6 5/5] riscv: dts: starfive: add DeepComputing FML13V01 board device tree
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v6 4/5] dt-bindings: riscv: starfive: add deepcomputing,fml13v01
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v6 3/5] dt-bindings: vendor: add deepcomputing
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v6 2/5] riscv: dts: starfive: jh7110-common: move usb0 config to board dts
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v6 1/5] riscv: dts: starfive: jh7110-common: revised device node
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCH v6 0/5] Add DeepComputing FML13V01 board dts
- From: Guodong Xu <guodong@xxxxxxxxxxxx>
- [PATCHv3 22/22] ARM: dts: socfpga: add Enclustra SoM dts files
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 21/22] dt-bindings: altera: removal of generic PE1 dts
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 20/22] ARM: dts: socfpga: removal of generic PE1 dts
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 19/22] dt-bindings: altera: add Mercury AA1 combinations
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 18/22] ARM: dts: socfpga: add Mercury AA1 combinations
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 17/22] dt-bindings: altera: add binding for Mercury+ SA2
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 16/22] ARM: dts: socfpga: add Enclustra Mercury+ SA2
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 15/22] dt-bindings: altera: add Enclustra Mercury SA1
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 14/22] ARM: dts: socfpga: add Enclustra Mercury SA1
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 13/22] ARM: dts: socfpga: add Enclustra base-board dtsi
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 12/22] ARM: dts: socfpga: add Enclustra boot-mode dtsi
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 11/22] dt-bindings: net: snps,dwmac: add support for Arria10
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 10/22] ARM: dts: socfpga: remove arria10 reset-names
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 09/22] ARM: dts: socfpga: add ranges property to sram
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 08/22] ARM: dts: socfpga: add clock-frequency property
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 07/22] ARM: dts: socfpga: fix missing ranges
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 06/22] ARM: dts: socfpga: add missing cells properties
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 05/22] ARM: dts: socfpga: add label to clock manager
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 04/22] ARM: dts: socfpga: align fpga-region name
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 03/22] ARM: dts: socfpga: align dma name with binding
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 02/22] ARM: dts: socfpga: align bus name with bindings
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 01/22] ARM: dts: socfpga: fix typo
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCHv3 00/22] Add Enclustra Arria10 and Cyclone5 SoMs
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
- Re: [PATCH v2 10/14] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [PATCH v4 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: arm: qcom: Add Microsoft Windows Dev Kit 2023
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v4 0/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for Windows Dev Kit 2023
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- [PATCH v4 2/3] firmware: qcom: scm: Allow QSEECOM for Windows Dev Kit 2023
- From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: light: add support for veml3235
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- [PATCH v3 2/2] mtd: spi-nor: support vcc-supply regulator
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: mtd: jedec,spi-nor: add optional vcc-supply
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v3 0/2] spi-nor: add optional vcc-supply and enable it for i.MX93
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- Re: [PATCH 2/3] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: adc: adi,ad7124: Allow specifications of a gpio for irq line
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: adc: ad7124: Disable all channels at probe time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- Re: [PATCH 1/2] hwmon: pmbus: Add support for ltc2971
- From: Patryk <pbiel7@xxxxxxxxx>
- Re: [PATCH v2 13/13] iio: chemical: bme680: add power management
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 09/13] iio: chemical: bme680: Add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 08/13] iio: chemical: bme680: Add SCALE and RAW channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 07/13] iio: chemical: bme680: generalize read_*() functions
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 05/13] iio: chemical: bme680: move to fsleep()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/13] iio: chemical: bme680: refactorize set_mode() mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/13] iio: chemical: bme680: refactorize set_mode() mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/13] iio: chemical: bme680: avoid using camel case
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/13] iio: chemical: bme680: optimize startup time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/13] iio: chemical: bme680: Fix missing header
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: power/supply: Add ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- Re: [PATCH v3 4/4] docs: iio: ad7380: add adaq4370-4 and adaq4380-4
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 2/2] power/supply: Add support for ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- Re: [PATCH v3 3/4] iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/4] iio: adc: ad7380: fix oversampling formula
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 10/10] ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v2 09/10] ARM: dts: suniv: f1c100s: Add support for Audio Codec
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v2 07/10] dt-bindings: sound: Add Allwinner suniv F1C100s Audio Codec
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v2 05/10] ARM: dts: suniv: f1c100s: Add support for DMA
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- [PATCH v2 03/10] dt-bindings: dmaengine: Add Allwinner suniv F1C100s DMA
- From: Csókás, Bence <csokas.bence@xxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/3] iio: magnetometer: add support for the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 0/2] Add support for ltc4162-f/s and ltc4015
- From: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
- Re: [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] hwmon: (pwm-fan) add option to leave fan on shutdown
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH v3 14/16] rust: of: add `of::DeviceId` abstraction
- From: Fabien Parent <fabien.parent@xxxxxxxxxx>
- Re: [PATCH 3/3] mailbox: mediatek: Add mtk-apu-mailbox driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 15/16] rust: platform: add basic platform device / driver abstractions
- From: Fabien Parent <fabien.parent@xxxxxxxxxx>
- [PATCH v5 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 08/11] clk: qcom: add support for GCC on SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v5 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/3] arm64: dts: qcom: sar2130p: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 3/3] arm64: dts: qcom: sar2130p: add QAR2130P board file
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/3] dt-bindings: arm: qcom: add QAR2130P board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/3] arm64: dts: qcom: add QAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH RFC v4 05/15] spi: dt-bindings: add PWM SPI offload trigger
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 1/2] nvmem: qfprom: Ensure access to qfprom is word aligned
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 0/2] nvmem: qfprom: add Qualcomm SAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v4 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 3/3] remoteproc: qcom: pas: enable SAR2130P audio DSP support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/3] remoteproc: qcom: pas: add minidump_id to SM8350 resources
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/3] remoteproc: qcom: pas: enable ADSP support on Qualcomm SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH] dt-bindings: thermal: qcom-tsens: add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: magnetometer: add Allegro MicroSystems ALS31300 3-D Linear Hall Effect driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v3] dt-bindings: power: Convert raspberrypi,bcm2835-power to Dt schema
- From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
- [PATCH v3 10/10] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 09/10] arm64: dts: exynos: Add Exynos9810 SoC support
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 08/10] pinctrl: samsung: Add Exynos9810 SoC specific data
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 07/10] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 06/10] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 05/10] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 04/10] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 03/10] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 02/10] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 01/10] dt-bindings: arm: cpus: Add Samsung Mongoose M3
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v3 00/10] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH 2/2] perf: arm_pmuv3: Add support for Samsung Mongoose PMU
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH 0/2] arm_pmuv3: Add support for Samsung Mongoose PMU
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: hwmon: Add ltc2971 bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V4 4/5] soc: qcom: Introduce SCMI based Memlat (Memory Latency) governor
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 2/2] dt-bindings: mtd: davinci: convert to yaml
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/4] ASoC: dt-bindings: document the adau1373 Codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [RFC PATCH 2/6] dt-bindings: net: wireless: ath12k: describe WSI property for QCN9274
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: light: add support for veml3235
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: sm8650: correct MDSS interconnects
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 0/2] arm64: dts: qcom: sm8[56]50: correct MDSS interconnects
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 4/8] iio: dac: adi-axi-dac: extend features
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/3] iio: magnetometer: add support for the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
- From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
- Re: [PATCH v2 0/2] hwmon: (pwm-fan) add option to leave fan on shutdown
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: pmbus: Add support for ltc2971
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 15/15] iio: adc: ad4695: Add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH RFC v4 13/15] iio: adc: ad7944: add support for SPI offload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v4 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 08/11] clk: qcom: add support for GCC on SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v4 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 2/3] soc: qcom: llcc: use deciman integers for bit shift values
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 0/3] soc: qcom: llcc: add support for SAR2130P and SAR1130P platforms
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH V2 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH RFC v4 10/15] iio: buffer-dmaengine: document iio_dmaengine_buffer_setup_ext
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v4 05/15] spi: dt-bindings: add PWM SPI offload trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v4 03/15] spi: offload: add support for hardware triggers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: leds: Add LED1202 LED Controller
- From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
- Re: [PATCH V2 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v7 3/7] mfd: Add new driver for MAX77705 PMIC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Himanshu Bhavani <himanshu.bhavani@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH V2 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V2 2/3] arm64: dts: qcom: sa8775p: add EPSS l3 interconnect provider
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V2 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- [PATCH V2 0/3] Add EPSS L3 provider support on SA8775P SoC
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: display: panel: add YAML schema for LXD M9189A
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add lxd
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: sa8775p: Add LMH interrupts support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: light: veml6075: document rset-ohms
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 5/6] dt-bindings: clock: qcom: Add QCS8300 video clock controller
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: pinctrl: convert pinctrl-mcp23s08.txt to yaml format
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1
- From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
- Re: [PATCH v4 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: (subset) [PATCH v2 0/3] clk: samsung: Introduce Exynos8895 clock driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1
- From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
- Re: [PATCH v2 0/5] arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v12 3/8] mtd: rawnand: qcom: Add qcom prefix to common api
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/5] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v5 5/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: soc: bcm: Convert raspberrypi,bcm2835-power to Dt schema
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 4/5] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: qcom: add base QCS615 RIDE dts
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: nvmem: sprd,sc2731-efuse: convert to YAML
- From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
- Re: [PATCH v2 2/2] iio: light: veml6070: add support for integration time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/5] iio: adc: ad7606: add support for AD760{7,8,9} parts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 03/12] arm64: dts: qcom: sdm845-starqltechn: fix usb regulator mistake
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 06/12] arm64: dts: qcom: sdm845-starqltechn: add gpio keys
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 07/12] arm64: dts: qcom: sdm845-starqltechn: add max77705 PMIC
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 10/12] arm64: dts: qcom: sdm845-starqltechn: add initial sound support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 12/12] arm64: dts: qcom: sdm845-starqltechn: add modem support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] Add Xiaomi Poco F1 touchscreen support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 05/12] arm64: dts: qcom: sdm845-starqltechn: remove excess reserved gpios
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 01/12] arm64: dts: qcom: sdm845: enable gmu
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v12 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH 2/2] dt-bindings: hwmon: Add ltc2971 bindings
- From: Patryk Biel <pbiel7@xxxxxxxxx>
- [PATCH 1/2] hwmon: pmbus: Add support for ltc2971
- From: Patryk Biel <pbiel7@xxxxxxxxx>
- [PATCH 0/2] Add support for LTC2971 power manager
- From: Patryk Biel <pbiel7@xxxxxxxxx>
- Re: [PATCH v3 3/5] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] dt-bindings: hwmon: pwm-fan: add retain-state-shutdown property
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v2 1/2] hwmon: (pwm-fan) add option to leave fan on shutdown
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v2 0/2] hwmon: (pwm-fan) add option to leave fan on shutdown
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH V1 1/2] dt-bindings: crypto: qcom-qce: document the SA8775P crypto engine
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: rng: add support for Airoha EN7581 TRNG
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/4] Add support for stm32mp25x RNG
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: rng: Add Marvell Armada RNG support
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- [PATCH net-next v1 5/5] net: dsa: microchip: add support for side MDIO interface in LAN937x
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH net-next v1 3/5] net: dsa: microchip: Refactor MDIO handling for side MDIO access
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH net-next v1 1/5] dt-bindings: net: dsa: ksz: add internal MDIO bus description
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH net-next v1 2/5] dt-bindings: net: dsa: ksz: add mdio-parent-bus property for internal MDIO
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH net-next v1 4/5] net: dsa: microchip: cleanup error handling in ksz_mdio_register
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH net-next v1 0/5] Side MDIO Support for LAN937x Switches
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] drm: bridge: ti-sn65dsi83: Add error recovery mechanism
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
- From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
- RE: [PATCH v5 net-next 02/13] dt-bindings: net: add i.MX95 ENETC support
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 06/13] net: enetc: build enetc_pf_common.c as a separate module
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Frank Li <Frank.li@xxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 04/13] net: enetc: add initial netc-blk-ctrl driver support
- From: Wei Fang <wei.fang@xxxxxxx>
- RE: [PATCH v5 net-next 11/13] net: enetc: optimize the allocation of tx_bdr
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH 07/13] arm64: dts: allwinner: a100: add usb related nodes
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v5 net-next 05/13] net: enetc: extract common ENETC PF parts for LS1028A and i.MX95 platforms
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 07/13] arm64: dts: allwinner: a100: add usb related nodes
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v2 3/4] net: stmmac: platform: Add snps,dwmac-5.30a IP compatible string
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH v2 0/4] riscv: sophgo: Add ethernet support for SG2044
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH v29 04/33] xhci: sideband: add initial api to register a sideband entity
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH v4 4/4] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v4 1/4] PCI: dwc: ep: Add bus_addr_base for outbound window
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v7 0/2] Improve VM CPUfreq and task placement behavior
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH v2] of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 3/3] arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/3] arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodes
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/3] arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v4 08/10] PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
- From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
- Re: [PATCH v6 07/33] dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml)
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 02/10] dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: qcom: sm8550: correct MDSS interconnects
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH RFC 2/3] rust: Add bindings for device properties
- From: Alex Gaynor <alex.gaynor@xxxxxxxxx>
- [PATCH RFC 3/3] samples: rust: platform: Add property read examples
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH RFC 2/3] rust: Add bindings for device properties
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH RFC 1/3] of: unittest: Add a platform device node for rust platform driver sample
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH RFC 0/3] Initial rust bindings for device property reads
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v12 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 4/7] remoteproc: Introduce release_fw optional operation
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 2/7] remoteproc: Add TEE support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 5/7] dt-bindings: remoteproc: Add compatibility for TEE support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 1/7] remoteproc: core: Introduce rproc_pa_to_va helper
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 3/7] remoteproc: core: Refactor resource table cleanup into rproc_release_fw
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- [PATCH v12 0/7] Introduction of a remoteproc tee to load signed firmware
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
- Re: [PATCH v4 0/4] PCI: ep: dwc/imx6: Add bus address support for PCI endpoint devices
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2] media: dt-bindings: Remove assigned-clock-* from various schema
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v5] arm64: dts: qcom: Add coresight nodes for x1e80100
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 4/4] arm64: dts: qcom: qcs615-ride: Enable UFS node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 5/5] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 4/5] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v1 3/4] arm64: dts: qcom: qcs615: add UFS node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: net: renesas,ether: Add iommus property
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH v3 5/5] arm64: dts: qcom: qrb4210-rb2: add HDMI audio playback support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 5/6] remoteproc: qcom: Add support of SHM bridge to enable memory protection
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/4] soc: qcom: geni-se: Do not keep GPIOs to sleep state for shared SE usecase
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: Add coresight nodes for QCS615
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: qcom: x1e80100-qcp: Enable SD card support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] arm64: dts: qcom: x1e80100: Describe the SDHC controllers
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: accel: kxcjk-1013: Add support for KX022-1020
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v12 4/8] mtd: nand: Add qpic_common API file
- From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH v3 08/11] clk: qcom: add support for GCC on SAR2130P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: soc: bcm: Convert raspberrypi,bcm2835-power to Dt schema
- From: Karan Sanghavi <karansanghvi98@xxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e78100-t14s: add sound support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v12 5/8] mtd: rawnand: qcom: use FIELD_PREP and GENMASK
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
- From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 5/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
- From: Konrad Dybcio <konradybcio@xxxxxxxxx>
- Re: [PATCH 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: qcs8300: Add LLCC support for QCS8300
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: orangepi-5-plus: Enable USB 3.0 ports
- From: Chen-Yu Tsai <wens@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: orangepi-5-plus: Enable GPU
- From: Chen-Yu Tsai <wens@xxxxxxxxxx>
- Re: [PATCH v2 3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: qcs615: Add LLCC support for QCS615
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/6] firmware: ti_sci: Partial-IO support
- From: Nishanth Menon <nm@xxxxxx>
- [no subject]
- Re: [PATCH v2 2/3] soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH net-next v5 2/2] net: stmmac: Add glue layer for T-HEAD TH1520 SoC
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH net-next v5 1/2] dt-bindings: net: Add T-HEAD dwmac support
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- [PATCH net-next v5 0/2] Add the dwmac driver support for T-HEAD TH1520 SoC
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v5 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
- From: Grant Peltier <grantpeltier93@xxxxxxxxx>
- [PATCH v5 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout
- From: Grant Peltier <grantpeltier93@xxxxxxxxx>
- [PATCH v2 35/36] arm64: dts: broadcom: Add display pipeline support to BCM2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 36/36] arm64: dts: broadcom: Add DT for D-step version of BCM2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 34/36] arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 33/36] clk: bcm: rpi: Add disp clock
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 32/36] clk: bcm: rpi: Create helper to retrieve private data
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 30/36] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 31/36] clk: bcm: rpi: Enable minimize for all firmware clocks
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 29/36] clk: bcm: rpi: Add ISP to exported clocks
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 28/36] drm/vc4: Drop planes that are completely off-screen or 0 crtc size
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 27/36] drm/vc4: Enable bg_fill if there are no planes enabled
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 26/36] drm/vc4: Add additional warn_on for incorrect revisions
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 25/36] drm/vc4: hdmi: Support 2712 D-step register map
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 23/36] drm/vc4: hvs: Add in support for 2712 D-step.
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 24/36] drm/vc4: plane: Add support for 2712 D-step.
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 22/36] drm/vc4: drv: Add support for 2712 D-step
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 19/36] drm/vc4: txp: Add a new TXP encoder type
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 21/36] drm/vc4: txp: Add BCM2712 MOPLET support
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 20/36] drm/vc4: txp: Add support for BCM2712 MOP
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 10/36] drm/vc4: hvs: Add support for BCM2712 HVS
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 12/36] drm/vc4: hdmi: Add support for BCM2712 HDMI controllers
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 18/36] drm/vc4: txp: Move the encoder type in the variant structure
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 17/36] drm/vc4: txp: Handle 40-bits DMA Addresses
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 16/36] drm/vc4: txp: Add horizontal and vertical size offset toggle bit
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 15/36] drm/vc4: txp: Add byte enable toggle bit
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 13/36] drm/vc4: txp: Introduce structure to deal with revision differences
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 14/36] drm/vc4: txp: Rename TXP data structure
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 11/36] drm/vc4: crtc: Add support for BCM2712 PixelValves
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 09/36] drm/vc4: drv: Support BCM2712
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v5 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137
- From: Grant Peltier <grantpeltier93@xxxxxxxxx>
- [PATCH v2 08/36] dt-bindings: display: Add BCM2712 KMS driver bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 07/36] dt-bindings: display: Add BCM2712 MOPLET bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 06/36] dt-bindings: display: Add BCM2712 MOP bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 05/36] dt-bindings: display: Add BCM2712 PixelValve bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 04/36] dt-bindings: display: Add BCM2712 HVS bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 03/36] dt-bindings: display: Add BCM2712 HDMI bindings
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 02/36] drm/vc4: Fix reading of frame count on GEN5 / Pi4
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 00/36] drm/vc4: Add support for BCM2712 / Pi5 display hardware
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- [PATCH v2 01/36] drm/vc4: Use of_device_get_match_data to set generation
- From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v5 2/3] PCI: dwc: Using parent_bus_addr in of_range to eliminate cpu_addr_fixup()
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v2 5/5] dt-bindings: riscv: document vector crypto requirements
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/5] RISC-V: add vector crypto extension validation checks
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH] ARM: dts: ti/omap: dra7: fix redundant clock divider definition
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: (subset) [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: clock: axi-clkgen: include AXI clk
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v3 3/5] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH RFC v4 09/15] spi: axi-spi-engine: implement offload support
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC v4 06/15] spi: offload-trigger: add PWM trigger driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: display: panel: Move flip properties to panel-common
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 2/5] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] arm64: dts: allwinner: Add disable-wp for boards with micro SD card
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: sunxi: document RerVision A33-Vstar board
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v2] media: dt-bindings: Remove assigned-clock-* from various schema
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v12 6/8] spi: spi-qpic: add driver for QCOM SPI NAND flash Interface
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH 6/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 4/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 5/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 2/6] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 0/6] qcom: camss: dts: Prune and tidy x13s, rb5 and rb3 CAMSS dts
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- [PATCH 1/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v3 4/6] iio: imu: bmi270: Add support for BMI260
- From: Justin Weiss <justin@xxxxxxxxxxxxxxx>
- Re: [PATCH/RFC 0/2] arm64: dts: renesas: Re-add voltages to OPP tables
- From: Lukasz Luba <lukasz.luba@xxxxxxx>
- Re: [PATCH] dt-bindings: net: renesas,ether: Add iommus property
- From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
- [PATCH] arm64: dts: qcom: x1e78100-t14s: add sound support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: interconnect: Add EPSS L3 compatible for SA8775P
- From: Raviteja Laggyshetty <quic_rlaggysh@xxxxxxxxxxx>
- Re: (subset) [PATCH v3 0/7] ASoC: add Allwinner H616 audio codec support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH] ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v6 RESEND 00/20] Initial device trees for A7-A11 based Apple devices
- From: Hector Martin <marcan@xxxxxxxxx>
- [PATCH v2 0/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P platforms
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 2/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH] dt-bindings: net: renesas,ether: Add iommus property
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: (subset) [PATCH v3 0/7] ASoC: add Allwinner H616 audio codec support
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH] arm64: dts: x1e80100-crd: describe HID supplies
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2 0/5] iio: adc: ad7606: add support for AD760{7,8,9} parts
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v3 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 08/11] clk: qcom: add support for GCC on SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 04/11] dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: ltc4296-1: add driver support
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v6 3/3] clk: aspeed: add AST2700 clock driver.
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
- From: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
- Re: [PATCH v2 07/11] clk: qcom: rpmh: add support for SAR2130P
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 1/3] dt-bindings: mmc: Add sdhci compatible for QCS615
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2] mmc: pwrseq_simple: add support for one reset control
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 0/2] Add mmc support for mt7988
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 0/3] Add mtk-sd support for MT8196
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v2 3/4] net: stmmac: platform: Add snps,dwmac-5.30a IP compatible string
- From: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
- Re: [PATCH] ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v2 4/4] net: stmmac: Add glue layer for Sophgo SG2044 SoC
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: renesas: r7s72100: add dma entries for MMCIF
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: renesas: r7s72100: add DMAC node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: renesas: hihope: Drop #sound-dai-cells
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: ltc4296-1: add driver support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: display: panel: add YAML schema for LXD M9189A
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add lxd
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [PATCH V2 1/2] ASoC: dt-bindings: Add schema for "awinic,aw88081"
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 net-next 02/13] dt-bindings: net: add i.MX95 ENETC support
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 6/6] hwmon: (pmbus/tps25990): add initial support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/4] arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 0/2] Add device tree for MT8188-based Chromebook "Ciri"
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 00/13] sunxi: A100/A133 second stage support
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: dts: add Kobo Clara 2E
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 1/1] arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH RFC v4 11/15] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v5 net-next 06/13] net: enetc: build enetc_pf_common.c as a separate module
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: [PATCH v3 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
- From: Code Kipper <codekipper@xxxxxxxxx>
- [PATCH v2 11/11] scsi: ufs: exynos: gs101: enable clock gating with hibern8
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 10/11] scsi: ufs: exynos: fix hibern8 notify callbacks
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 09/11] scsi: ufs: exynos: set ACG to be controlled by UFS_ACG_DISABLE
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 08/11] scsi: ufs: exynos: enable write line unique transactions on gs101
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 07/11] scsi: ufs: exynos: add gs101_ufs_drv_init() hook and enable WriteBooster
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 06/11] scsi: ufs: exynos: remove tx_dif_p_nsec from exynosauto_ufs_drv_init()
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 05/11] scsi: ufs: exynos: gs101: remove unused phy attribute fields
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 04/11] scsi: ufs: exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR check
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 03/11] scsi: ufs: exynos: gs101: remove EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 02/11] scsi: ufs: exynos: add check inside exynos_ufs_config_smu()
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 01/11] scsi: ufs: exynos: Allow UFS Gear 4
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH v2 00/11] UFS cleanups and enhancements to ufs-exynos for gs101
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH RFC v4 09/15] spi: axi-spi-engine: implement offload support
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 0/4] riscv: sophgo: Add ethernet support for SG2044
- From: Simon Horman <horms@xxxxxxxxxx>
- Re: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- Re: RFC: Advice on adding support for Qualcomm IPQ9574 SoC Ethernet
- From: "Kiran Kumar C.S.K" <quic_kkumarcs@xxxxxxxxxxx>
- Re: [PATCH RFC v4 02/15] spi: add basic support for SPI offloading
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [net-next RFC PATCH v2 3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v2 10/12] pinctrl: samsung: Add Exynos9810 SoC specific data
- From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
- [PATCH v4 10/10] arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 09/10] arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 08/10] PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 07/10] PCI: brcmstb: Add bcm2712 support
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 06/10] PCI: brcmstb: Enable external MSI-X if available
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 04/10] PCI: brcmstb: Reuse config structure
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 05/10] PCI: brcmstb: Expand inbound window size up to 64GB
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 03/10] irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 02/10] dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 01/10] dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- [PATCH v4 00/10] Add PCIe support for bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- Re: [PATCH v2 11/12] arm64: dts: exynos: Add Exynos9810 SoC support
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v5 net-next 04/13] net: enetc: add initial netc-blk-ctrl driver support
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v4 00/10] Add PCIe support for bcm2712
- From: Stanimir Varbanov <svarbanov@xxxxxxx>
- Re: [PATCH v2 08/12] perf: arm_pmuv3: Add support for Samsung Mongoose PMU
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 04/12] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 01/12] dt-bindings: arm: cpus: Add Samsung Mongoose M3
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 0/3] Add Microchip IPC mailbox
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH V1 3/3] arm64: dts: qcom: x1e001de-devkit: Enable external DP support
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH v2 3/3] mailbox: add Microchip IPC support
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH V1 2/3] arm64: dts: qcom: x1e001de-devkit: Enable SD card support
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH v2 1/3] riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- [PATCH V1 1/3] arm64: dts: qcom: x1e001de-devkit: Add audio related nodes
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH V1 0/3] X1E001DE Devkit remaining features
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
- From: Valentina Fernandez <valentina.fernandezalanis@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: net: wireless: ath11k-pci: add firmware-name property
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 2/4] dt-bindings: arm-smmu: document QCS615 APPS SMMU
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH V3 3/3] arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH V3 2/3] firmware: qcom: uefisecapp: Allow X1E Devkit devices
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH V3 1/3] dt-bindings: arm: qcom: Add Snapdragon Devkit for Windows
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- [PATCH V3 0/3] X1E001DE Snapdragon Devkit for Windows
- From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
- RE: [EXT] Re: [PATCH v17 3/8] dt-bindings: display: bridge: Add Cadence MHDP8501
- From: Sandor Yu <sandor.yu@xxxxxxx>
- Re: [PATCH 13/13] arm64: dts: allwinner: a100: Add CPU Operating Performance Points table
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH RFC v4 08/15] spi: dt-bindings: axi-spi-engine: add SPI offload properties
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH RFC v4 07/15] spi: add offload TX/RX streaming APIs
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v4 6/7] arm64: dts: qcom: add base QCS615 RIDE dts
- From: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
- Re: [PATCH v5 1/3] dt-bindings: pwm: sophgo: add PWM controller for SG2042
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 22/37] drm/vc4: txp: Add BCM2712 MOPLET support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH RFC v4 06/15] spi: offload-trigger: add PWM trigger driver
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v2 12/12] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/2] hwmon: ltc4296-1: add driver support
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: hwmon: add ltc4296-1 support
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- [PATCH 0/2] Add Support for LTC4296-1
- From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
- Re: [PATCH v8 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v2 6/6] pinctrl: renesas: pinctrl-rzg2l: Override irq_request/release_resources
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 5/6] pinctrl: pinmux: Introduce API to check if a pin is requested
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 4/6] pinctrl: renesas: rzg2l: Drop calling rzg2l_gpio_request()
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 3/6] pinctrl: renesas: rzg2l: Reorder function call in rzg2l_gpio_free()
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 2/6] pinctrl: renesas: rzg2l: Release all the virq's in free callback
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 0/6] pinctrl: rzg2l: Fix releasing of IRQ and status reported in pinmux-pins
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH v2 1/6] arm64: dts: renesas: rzg3s-smarc: Drop hogging of GPIO pins
- From: Prabhakar <prabhakar.csengg@xxxxxxxxx>
- [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Charles Wang <charles.goodix@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 5/7] arm64: dts: qcom: add initial support for QCS615 DTSI
- From: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
- RE: [PATCH v3 6/6] iio: adc: ad4851: add ad485x driver
- From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
- Re: [PATCH] riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- Re: [PATCH] dt-bindings: input: Goodix SPI HID Touchscreen
- From: Charles Wang <charles.goodix@xxxxxxxxx>
- [PATCH 2/2] riscv: dts: sophgo: Add emmc support for Huashan Pi
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH 1/2] riscv: dts: sophgo: Add sdio configuration for Huashan Pi
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH 0/2] riscv: dts: sophgo: cv18xx: add emmc and sdio support
- From: Inochi Amaoto <inochiama@xxxxxxxxx>
- [PATCH v2 12/12] arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 11/12] arm64: dts: exynos: Add Exynos9810 SoC support
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 10/12] pinctrl: samsung: Add Exynos9810 SoC specific data
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 09/12] soc: samsung: exynos-chipid: Add support for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 08/12] perf: arm_pmuv3: Add support for Samsung Mongoose PMU
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 07/12] dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 06/12] dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 05/12] dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 04/12] dt-bindings: pinctrl: samsung: Add compatible for exynos9810-wakeup-eint
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 03/12] dt-bindings: pinctrl: samsung: Add compatible for Exynos9810 SoC
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 02/12] dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 01/12] dt-bindings: arm: cpus: Add Samsung Mongoose M3
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- [PATCH v2 00/12] Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F)
- From: Markuss Broks <markuss.broks@xxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: mediatek: mt8183: Disable DSI display output by default
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: mediatek: mt8183: Disable DPI display output by default
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH v4 0/7] Add initial support for QCS615 SoC and QCS615 RIDE board
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: Add performance hint for boost clock
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] arm64: dts: mediatek: Introduce MT8188 Geralt platform based Ciri
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: arm: mediatek: Add MT8188 Lenovo Chromebook Duet (11", 9)
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 0/2] Add device tree for MT8188-based Chromebook "Ciri"
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [net-next RFC PATCH v2 3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [net-next RFC PATCH v2 3/3] net: phy: Add Airoha AN8855 Internal Switch Gigabit PHY
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH v4 15/18] dt-bindings: usb: Add ports to google,cros-ec-typec for DP altmode
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 4/4] ASoC: dt-bindings: maxim,max98390: Document maxim,dsm_param_name property
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 3/4] ASoC: dt-bindings: maxim,max98390: Refernce common DAI properties
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 2/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Update DAI link node pattern
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 1/4] ASoC: dt-bindings: mediatek,mt8188-mt6359: Add adsp and dai-link properties
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH 0/4] Update properties in two ASoC DT bindings
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- [PATCH] dt-bindings: display: mediatek: dp: Add #sound-dai-cells property
- From: Fei Shao <fshao@xxxxxxxxxxxx>
- Re: [PATCH v3 16/16] samples: rust: add Rust platform sample driver
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: typec: mux: Add support for the TUSB1046 crosspoint switch
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v1 0/2] Enable WDT reload feature
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: soc: imx: fsl, imx-anatop: Fix the i.MX7 irq number
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: soc: imx: fsl, imx-anatop: Add additional regulators
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PATCH 04/13] dt-bindings: usb: Add A100 compatible string
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [RFC PATCH 2/6] dt-bindings: net: wireless: ath12k: describe WSI property for QCN9274
- From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
- Re: [RFC PATCH 2/6] dt-bindings: net: wireless: ath12k: describe WSI property for QCN9274
- From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
- Re: [PATCH v3 7/7] arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
- From: Andre Przywara <andre.przywara@xxxxxxx>
- [PATCH v3 2/2] wifi: ath11k: support board-specific firmware overrides
- From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: net: wireless: ath11k-pci: add firmware-name property
- From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
- [PATCH v3 0/2] wifi: ath11k: support board-specific firmware overrides
- From: Miaoqing Pan <quic_miaoqing@xxxxxxxxxxx>
- Re: [RFC PATCH 1/6] dt-bindings: net: wireless: update required properties for ath12k PCI module
- From: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx>
- [PATCH v2 5/5] iio: adc: ad7606: add support for AD760{7,8,9} parts
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v2 4/5] dt-bindings: iio: adc: adi,ad7606: document AD760{7,8,9} parts
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v2 3/5] iio: adc: ad7606: rework scale-available to be static
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v2 2/5] iio: adc: ad7606: use realbits for sign-extending in scan_direct
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v2 1/5] iio: adc: ad7606: fix/persist oversampling_ratio setting
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v2 0/5] iio: adc: ad7606: add support for AD760{7,8,9} parts
- From: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
- [PATCH v1 2/2] arm64: dts: imx8mp-verdin: add single-master property to all i2c nodes
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v1 1/2] arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v1 0/2] arm64: dts: imx8mm/imx8mp-verdin: add single-master property to all i2c nodes
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- Re: [PATCH v4 1/3] spinlock: extend guard with spinlock_bh variants
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH v5 net-next 11/13] net: enetc: optimize the allocation of tx_bdr
- From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
- [PATCH v8 7/8] iio: dac: ad3552r: add high-speed platform driver
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 8/8] iio: dac: adi-axi-dac: add registering of child fdt node
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 6/8] iio: dac: ad3552r: extract common code (no changes in behavior intended)
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 5/8] iio: dac: ad3552r: changes to use FIELD_PREP
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 4/8] iio: dac: adi-axi-dac: extend features
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 3/8] iio: backend: extend features
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 1/8] dt-bindings: iio: dac: ad3552r: add iio backend support
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- [PATCH v8 0/8] iio: add support for the ad3552r AXI DAC IP
- From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
- Re: [PATCH v1 0/2] Enable WDT reload feature
- From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
- [PATCH v4 3/3] crypto: Add Mediatek EIP-93 crypto engine support
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v4 2/3] dt-bindings: crypto: Add Inside Secure SafeXcel EIP-93 crypto engine
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- [PATCH v4 1/3] spinlock: extend guard with spinlock_bh variants
- From: Christian Marangi <ansuelsmth@xxxxxxxxx>
- Re: [PATCH 21/37] drm/vc4: txp: Add support for BCM2712 MOP
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH 3/4] memory: mtk-smi: mt8188: Add SMI clamp function
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: memory: mediatek: Add smi-sub-common property for reset
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: memory: mediatek: Add smi-sub-common property for reset
- From: Friday Yang (杨阳) <Friday.Yang@xxxxxxxxxxxx>
- Re: [PATCH v4 14/28] media: iris: implement iris v4l2_ctrl_ops
- From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
- Re: [PATCH v3 0/7] Fix RK3588 GPU domain
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v3 2/2] iio: light: add support for veml3235
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v2 0/4] arm64: dts: mt8183: Add i2c-scl-internal-delay-ns
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: light: add support for veml3235
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 3/7] mfd: Add new driver for MAX77705 PMIC
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v4 2/2] firmware: arm_scmi: Support 'reg-io-width' property for shared memory
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- RE: [PATCH v3 12/15] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] arm64: dts: qcom: sc8280xp-blackrock: dt definition for WDK2023
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- Re: [PATCH v6 7/7] leds: max77705: Add LEDs support
- From: Lee Jones <lee@xxxxxxxxxx>
- Re: [PATCH v3 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
- [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- [PATCH v6 1/2] arm64: dts: qcom: sa8775p: Update sleep_clk frequency
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- [PATCH v6 0/2] Add support for videocc, camcc, dispcc0 and dispcc1 on Qualcomm SA8775P platform.
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v5 8/8] arm64: dts: qcom: Add support for multimedia clock controllers
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- Re: [PATCH v3 7/7] arm64: dts: rockchip: Add GPU power domain regulator dependency for RK3588
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v5 7/8] arm64: dts: qcom: Update sleep_clk frequency to 32000 on SA8775P
- From: Taniya Das <quic_tdas@xxxxxxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- Re: [PATCH] dt-bindings: pinctrl: qcom,sm8650-lpass-lpi-pinctrl: Add SM8750
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] pinctrl: qcom: Add sm8750 pinctrl driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
- From: Andrea della Porta <andrea.porta@xxxxxxxx>
- [no subject]
- Re: [PATCH v3 12/15] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
- From: Liu Ying <victor.liu@xxxxxxx>
- RE: [PATCH v4 net-next 03/13] dt-bindings: net: add bindings for NETC blocks control
- From: Wei Fang <wei.fang@xxxxxxx>
- imx8mp: HDMI display blank/black problems
- From: mailinglist1@xxxxxxxxxxxxxxxxxxxx
- Re: [PATCH v5 2/3] pwm: sophgo: add driver for Sophgo SG2042 PWM
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- Re: [PATCH v5 1/3] dt-bindings: pwm: sophgo: add PWM controller for SG2042
- From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
- Re: [PATCH v4 0/7] Add initial support for QCS615 SoC and QCS615 RIDE board
- From: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
- Re: [PATCH v1 0/2] Enable WDT reload feature
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: qcom: x1e80100: Add performance hint for boost clock
- From: Jiajie Chen <c@xxxxxx>
- [PATCH v5 3/3] riscv: sophgo: dts: add pwm controller for SG2042 SoC
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v5 2/3] pwm: sophgo: add driver for Sophgo SG2042 PWM
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v5 1/3] dt-bindings: pwm: sophgo: add PWM controller for SG2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v5 0/3] pwm: Add pwm driver for Sophgo SG2042
- From: Chen Wang <unicornxw@xxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns
- From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns
- From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
- [PATCH v2 2/4] arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns
- From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
- [PATCH v2 1/4] arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns
- From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
- [PATCH v2 0/4] arm64: dts: mt8183: Add i2c-scl-internal-delay-ns
- From: Hsin-Te Yuan <yuanhsinte@xxxxxxxxxxxx>
- Re: [PATCHv2 12/23] ARM: socfpga: dts: add a10 clock binding yaml
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: (subset) [PATCH v6 0/6] arm64: dts: qcom: enable Bluetooth and WLAN on sc8280xp and sm8450 boards
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]