Re: [PATCH v5 -next 04/11] PCI: brcmstb: Reuse config structure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 20, 2025 at 8:01 AM Stanimir Varbanov <svarbanov@xxxxxxx> wrote:
>
> Instead of copying fields from pcie_cfg_data structure to
> brcm_pcie reference it directly.
>
> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxx>
> Reviewed-by: Florian Fainelil <florian.fainelli@xxxxxxxxxxxx>
> ---
> v4 -> v5:
>  - No changes.
>
>  drivers/pci/controller/pcie-brcmstb.c | 70 ++++++++++++---------------
>  1 file changed, 31 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index e733a27dc8df..48b2747d8c98 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -191,11 +191,11 @@
>  #define SSC_STATUS_PLL_LOCK_MASK       0x800
>  #define PCIE_BRCM_MAX_MEMC             3
>
> -#define IDX_ADDR(pcie)                 ((pcie)->reg_offsets[EXT_CFG_INDEX])
> -#define DATA_ADDR(pcie)                        ((pcie)->reg_offsets[EXT_CFG_DATA])
> -#define PCIE_RGR1_SW_INIT_1(pcie)      ((pcie)->reg_offsets[RGR1_SW_INIT_1])
> -#define HARD_DEBUG(pcie)               ((pcie)->reg_offsets[PCIE_HARD_DEBUG])
> -#define INTR2_CPU_BASE(pcie)           ((pcie)->reg_offsets[PCIE_INTR2_CPU_BASE])
> +#define IDX_ADDR(pcie)                 ((pcie)->cfg->offsets[EXT_CFG_INDEX])
> +#define DATA_ADDR(pcie)                        ((pcie)->cfg->offsets[EXT_CFG_DATA])
> +#define PCIE_RGR1_SW_INIT_1(pcie)      ((pcie)->cfg->offsets[RGR1_SW_INIT_1])
> +#define HARD_DEBUG(pcie)               ((pcie)->cfg->offsets[PCIE_HARD_DEBUG])
> +#define INTR2_CPU_BASE(pcie)           ((pcie)->cfg->offsets[PCIE_INTR2_CPU_BASE])
>
>  /* Rescal registers */
>  #define PCIE_DVT_PMU_PCIE_PHY_CTRL                             0xc700
> @@ -276,8 +276,6 @@ struct brcm_pcie {
>         int                     gen;
>         u64                     msi_target_addr;
>         struct brcm_msi         *msi;
> -       const int               *reg_offsets;
> -       enum pcie_soc_base      soc_base;
>         struct reset_control    *rescal;
>         struct reset_control    *perst_reset;
>         struct reset_control    *bridge_reset;
> @@ -285,17 +283,14 @@ struct brcm_pcie {
>         int                     num_memc;
>         u64                     memc_size[PCIE_BRCM_MAX_MEMC];
>         u32                     hw_rev;
> -       int                     (*perst_set)(struct brcm_pcie *pcie, u32 val);
> -       int                     (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
>         struct subdev_regulators *sr;
>         bool                    ep_wakeup_capable;
> -       bool                    has_phy;
> -       u8                      num_inbound_wins;
> +       const struct pcie_cfg_data      *cfg;
>  };
>
>  static inline bool is_bmips(const struct brcm_pcie *pcie)
>  {
> -       return pcie->soc_base == BCM7435 || pcie->soc_base == BCM7425;
> +       return pcie->cfg->soc_base == BCM7435 || pcie->cfg->soc_base == BCM7425;
>  }
>
>  /*
> @@ -855,7 +850,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
>          * security considerations, and is not implemented in our modern
>          * SoCs.
>          */
> -       if (pcie->soc_base != BCM7712)
> +       if (pcie->cfg->soc_base != BCM7712)
>                 add_inbound_win(b++, &n, 0, 0, 0);
>
>         resource_list_for_each_entry(entry, &bridge->dma_ranges) {
> @@ -872,10 +867,10 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
>                  * That being said, each BARs size must still be a power of
>                  * two.
>                  */
> -               if (pcie->soc_base == BCM7712)
> +               if (pcie->cfg->soc_base == BCM7712)
>                         add_inbound_win(b++, &n, size, cpu_start, pcie_start);
>
> -               if (n > pcie->num_inbound_wins)
> +               if (n > pcie->cfg->num_inbound_wins)
>                         break;
>         }
>
> @@ -889,7 +884,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
>          * that enables multiple memory controllers.  As such, it can return
>          * now w/o doing special configuration.
>          */
> -       if (pcie->soc_base == BCM7712)
> +       if (pcie->cfg->soc_base == BCM7712)
>                 return n;
>
>         ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
> @@ -1012,7 +1007,7 @@ static void set_inbound_win_registers(struct brcm_pcie *pcie,
>                  * 7712:
>                  *     All of their BARs need to be set.
>                  */
> -               if (pcie->soc_base == BCM7712) {
> +               if (pcie->cfg->soc_base == BCM7712) {
>                         /* BUS remap register settings */
>                         reg_offset = brcm_ubus_reg_offset(i);
>                         tmp = lower_32_bits(cpu_addr) & ~0xfff;
> @@ -1036,15 +1031,15 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
>         int memc, ret;
>
>         /* Reset the bridge */
> -       ret = pcie->bridge_sw_init_set(pcie, 1);
> +       ret = pcie->cfg->bridge_sw_init_set(pcie, 1);
>         if (ret)
>                 return ret;
>
>         /* Ensure that PERST# is asserted; some bootloaders may deassert it. */
> -       if (pcie->soc_base == BCM2711) {
> -               ret = pcie->perst_set(pcie, 1);
> +       if (pcie->cfg->soc_base == BCM2711) {
> +               ret = pcie->cfg->perst_set(pcie, 1);
>                 if (ret) {
> -                       pcie->bridge_sw_init_set(pcie, 0);
> +                       pcie->cfg->bridge_sw_init_set(pcie, 0);
>                         return ret;
>                 }
>         }
> @@ -1052,7 +1047,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
>         usleep_range(100, 200);
>
>         /* Take the bridge out of reset */
> -       ret = pcie->bridge_sw_init_set(pcie, 0);
> +       ret = pcie->cfg->bridge_sw_init_set(pcie, 0);
>         if (ret)
>                 return ret;
>
> @@ -1072,9 +1067,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
>          */
>         if (is_bmips(pcie))
>                 burst = 0x1; /* 256 bytes */
> -       else if (pcie->soc_base == BCM2711)
> +       else if (pcie->cfg->soc_base == BCM2711)
>                 burst = 0x0; /* 128 bytes */
> -       else if (pcie->soc_base == BCM7278)
> +       else if (pcie->cfg->soc_base == BCM7278)
>                 burst = 0x3; /* 512 bytes */
>         else
>                 burst = 0x2; /* 512 bytes */
> @@ -1199,7 +1194,7 @@ static void brcm_extend_rbus_timeout(struct brcm_pcie *pcie)
>         u32 timeout_us = 4000000; /* 4 seconds, our setting for L1SS */
>
>         /* 7712 does not have this (RGR1) timer */
> -       if (pcie->soc_base == BCM7712)
> +       if (pcie->cfg->soc_base == BCM7712)
>                 return;
>
>         /* Each unit in timeout register is 1/216,000,000 seconds */
> @@ -1277,7 +1272,7 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie)
>         int ret, i;
>
>         /* Unassert the fundamental reset */
> -       ret = pcie->perst_set(pcie, 0);
> +       ret = pcie->cfg->perst_set(pcie, 0);
>         if (ret)
>                 return ret;
>
> @@ -1463,12 +1458,12 @@ static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
>
>  static inline int brcm_phy_start(struct brcm_pcie *pcie)
>  {
> -       return pcie->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
> +       return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 1) : 0;
>  }
>
>  static inline int brcm_phy_stop(struct brcm_pcie *pcie)
>  {
> -       return pcie->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
> +       return pcie->cfg->has_phy ? brcm_phy_cntl(pcie, 0) : 0;
>  }
>
>  static int brcm_pcie_turn_off(struct brcm_pcie *pcie)
> @@ -1479,7 +1474,7 @@ static int brcm_pcie_turn_off(struct brcm_pcie *pcie)
>         if (brcm_pcie_link_up(pcie))
>                 brcm_pcie_enter_l23(pcie);
>         /* Assert fundamental reset */
> -       ret = pcie->perst_set(pcie, 1);
> +       ret = pcie->cfg->perst_set(pcie, 1);
>         if (ret)
>                 return ret;
>
> @@ -1582,7 +1577,7 @@ static int brcm_pcie_resume_noirq(struct device *dev)
>                 goto err_reset;
>
>         /* Take bridge out of reset so we can access the SERDES reg */
> -       pcie->bridge_sw_init_set(pcie, 0);
> +       pcie->cfg->bridge_sw_init_set(pcie, 0);
>
>         /* SERDES_IDDQ = 0 */
>         tmp = readl(base + HARD_DEBUG(pcie));
> @@ -1803,12 +1798,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>         pcie = pci_host_bridge_priv(bridge);
>         pcie->dev = &pdev->dev;
>         pcie->np = np;
> -       pcie->reg_offsets = data->offsets;
> -       pcie->soc_base = data->soc_base;
> -       pcie->perst_set = data->perst_set;
> -       pcie->bridge_sw_init_set = data->bridge_sw_init_set;
> -       pcie->has_phy = data->has_phy;
> -       pcie->num_inbound_wins = data->num_inbound_wins;
> +       pcie->cfg = data;
>
>         pcie->base = devm_platform_ioremap_resource(pdev, 0);
>         if (IS_ERR(pcie->base))
> @@ -1843,7 +1833,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>         if (ret)
>                 return dev_err_probe(&pdev->dev, ret, "could not enable clock\n");
>
> -       pcie->bridge_sw_init_set(pcie, 0);
> +       pcie->cfg->bridge_sw_init_set(pcie, 0);
>
>         if (pcie->swinit_reset) {
>                 ret = reset_control_assert(pcie->swinit_reset);
> @@ -1882,7 +1872,8 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>                 goto fail;
>
>         pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
> -       if (pcie->soc_base == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
> +       if (pcie->cfg->soc_base == BCM4908 &&
> +           pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
>                 dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
>                 ret = -ENODEV;
>                 goto fail;
> @@ -1897,7 +1888,8 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>                 }
>         }
>
> -       bridge->ops = pcie->soc_base == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
> +       bridge->ops = pcie->cfg->soc_base == BCM7425 ?
> +                               &brcm7425_pcie_ops : &brcm_pcie_ops;
>         bridge->sysdata = pcie;
>
>         platform_set_drvdata(pdev, pcie);

Reviewed-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> --
> 2.47.0
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux