Hi, On Fri Jan 31, 2025 at 8:03 PM UTC, Ferass El Hafidi wrote: > From: Ferass El Hafidi <funderscore@xxxxxxxxxxxxxxxx> > > This patch series aims to add initial support for the Xiaomi Mi TV > Stick. > > Xiaomi Mi TV Stick is a small Amlogic-based Android TV stick released in > 2020, and known as `xiaomi-aquaman` internally (in the downstream kernel, > u-boot, ...) > Its specifications are as follows: > * Amlogic S805Y SoC (believed to be mostly identical to S805X) > * 8 GB eMMC > * 1 GB of RAM > * Android TV 9, upgradable to Android TV 10 > > There are multiple variants: > * 1. Green PCB, manufactured in 2020, known UART pinout (helpfully > labeled on the board) > * 2. Blue PCB, not much documentation about it, presumably manufactured > between 2021 and 2023 > * 3. Green PCB, manufactured in 2023, known UART pinout, some layout > changes compared to the 2020 variant > > Among these variants, there are many boards using multiple different > Wi-Fi chips. Supporting all of them is out of scope for this patch > series. > > As of the time of writing this has only been tested on the 3rd variant. > It is believed that software-wise all three work mostly the same (if we > don't count Wi-Fi), but testing on the other variants would still be > appreciated. > > The devicetree is based on the Amlogic P241 DTS. > > Ferass El Hafidi (2): > dt-bindings: arm: amlogic: add Xiaomi Mi TV Stick > arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick > > .../devicetree/bindings/arm/amlogic.yaml | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../meson-gxl-s805y-xiaomi-aquaman.dts | 311 ++++++++++++++++++ > 3 files changed, 313 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s805y-xiaomi-aquaman.dts Superseded by v2: https://lore.kernel.org/all/20250201193044.28856-1-funderscore@xxxxxxxxxxxxxxxx/ Cheers.
