On Sat, Feb 01, 2025 at 04:19:01PM +0100, Konrad Dybcio wrote:
> On 1.02.2025 10:18 AM, Dmitry Baryshkov wrote:
> > On QCM2290-based devices the SE3 is used for the Bluetooth chips. Add
> > corresponding device node.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/qcm2290.dtsi | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> > index f0746123e594d5ce5cc314c956eaca11556a9211..5f92eb16482a0ea5f8436cfa7e55849f171ebd24 100644
> > --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> > @@ -1239,6 +1239,21 @@ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
> > status = "disabled";
> > };
> >
> > + uart3: serial@4a8c000 {
> > + compatible = "qcom,geni-uart";
> > + reg = <0x0 0x04a8c000 0x0 0x4000>;
> > + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> > + clock-names = "se";
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
> > + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
> > + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
> > + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
>
> This path doesn't look quite right.. there'MASTER_APPSS_PROC is only
> on one of these.
Hmm. I should check my c&p source then.
>
> + RPM_ACTIVE_TAG
>
> Konrad
--
With best wishes
Dmitry
