On QCM2290-based devices the SE3 is used for the Bluetooth chips. Add
corresponding device node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594d5ce5cc314c956eaca11556a9211..5f92eb16482a0ea5f8436cfa7e55849f171ebd24 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1239,6 +1239,21 @@ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
status = "disabled";
};
+ uart3: serial@4a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+ &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ status = "disabled";
+ };
+
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
reg = <0x0 0x04a90000 0x0 0x4000>;
--
2.39.5
