On Fri, Jan 31, 2025 at 02:01:48PM +1300, Chris Packham wrote: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + reg: > + maxItems: 1 > + > +patternProperties: > + '^mdio-bus@[0-4]$': 4 or 5 buses? > + $ref: mdio.yaml# > + > + properties: > + reg: > + maxItems: 1 > + > + required: > + - reg > + > + patternProperties: > + '^ethernet-phy@[a-f0-9]+$': > + type: object > + $ref: ethernet-phy.yaml# > + > + properties: > + realtek,port: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + The MDIO communication on the RTL9300 is abstracted by the switch. At > + the software level communication uses the switch port to address the > + PHY with the actual MDIO bus and address having been setup via the > + parent mdio-bus and reg property. maximum: 8 ? also property should be required or you miss here default. Best regards, Krzysztof
