This series adds a driver for the MDIO controller on the RTL9300 family of devices. The controller is a little unique in that we can't access the SMI interfaces directly. This means we need to use the hardware description from the DTS to compute a mapping of switch port to mdio bus/address. Note that the dt-bindings: mfd patch is dependent on the dt-bindings: net patch. Gmail seems to have decided to throttle mail coming from our domain so there has been some things I've responded to that have hit lore.kernel.org but may not have been delivered directly. So sorry if it looks like I've ignored something. That's also why I haven't send this round out earlier as hopefully we've done enough to get of Google's naughty list. Chris Packham (4): dt-bindings: net: Add Realtek MDIO controller dt-bindings: mfd: Add MDIO interface to rtl9301-switch mips: dts: realtek: Add MDIO controller net: mdio: Add RTL9300 MDIO driver .../bindings/mfd/realtek,rtl9301-switch.yaml | 29 ++ .../bindings/net/realtek,rtl9301-mdio.yaml | 98 ++++ arch/mips/boot/dts/realtek/rtl930x.dtsi | 33 ++ drivers/net/mdio/Kconfig | 7 + drivers/net/mdio/Makefile | 1 + drivers/net/mdio/mdio-realtek-rtl9300.c | 436 ++++++++++++++++++ 6 files changed, 604 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml create mode 100644 drivers/net/mdio/mdio-realtek-rtl9300.c -- 2.48.1
