Add the two eDMA nodes in the device tree in order to enable the probing
of the S32G2/S32G3 eDMA driver.
Signed-off-by: Larisa Grigore <larisa.grigore@xxxxxxxxxxx>
---
v2: Moved #dma-cells before dma-channels and clock-names after clocks.
arch/arm64/boot/dts/freescale/s32g2.dtsi | 34 ++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/s32g3.dtsi | 34 ++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 7be430b78c83..64eac1dde05b 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -317,6 +317,23 @@ usdhc0-200mhz-grp4 {
};
};
+ edma0: dma-controller@40144000 {
+ compatible = "nxp,s32g2-edma";
+ reg = <0x40144000 0x24000>,
+ <0x4012c000 0x3000>,
+ <0x40130000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g2-linflexuart",
"fsl,s32v234-linflexuart";
@@ -333,6 +350,23 @@ uart1: serial@401cc000 {
status = "disabled";
};
+ edma1: dma-controller@40244000 {
+ compatible = "nxp,s32g2-edma";
+ reg = <0x40244000 0x24000>,
+ <0x4022c000 0x3000>,
+ <0x40230000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
uart2: serial@402bc000 {
compatible = "nxp,s32g2-linflexuart",
"fsl,s32v234-linflexuart";
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index 6c572ffe37ca..4f6201d6c08a 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -374,6 +374,23 @@ usdhc0-200mhz-grp4 {
};
};
+ edma0: dma-controller@40144000 {
+ compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+ reg = <0x40144000 0x24000>,
+ <0x4012c000 0x3000>,
+ <0x40130000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
uart0: serial@401c8000 {
compatible = "nxp,s32g3-linflexuart",
"fsl,s32v234-linflexuart";
@@ -390,6 +407,23 @@ uart1: serial@401cc000 {
status = "disabled";
};
+ edma1: dma-controller@40244000 {
+ compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
+ reg = <0x40244000 0x24000>,
+ <0x4022c000 0x3000>,
+ <0x40230000 0x3000>;
+ #dma-cells = <2>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx-0-15",
+ "tx-16-31",
+ "err";
+ clocks = <&clks 63>, <&clks 64>;
+ clock-names = "dmamux0", "dmamux1";
+ };
+
uart2: serial@402bc000 {
compatible = "nxp,s32g3-linflexuart",
"fsl,s32v234-linflexuart";
--
2.47.0
