On Tue, Jan 28, 2025 at 01:07:36PM +0100, Christian Bruel wrote:
[...]
> + pcie@48400000 {
> + compatible = "st,stm32mp25-pcie-rc";
> + device_type = "pci";
> + reg = <0x48400000 0x400000>,
> + <0x10000000 0x10000>;
> + reg-names = "dbi", "config";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
> + <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
> + <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
> + dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
> + clocks = <&rcc CK_BUS_PCIE>;
> + resets = <&rcc PCIE_R>;
> + msi-parent = <&v2m0>;
> + wakeup-source;
Does this property really need to be present? If the WAKE# gpio is supported,
isn't it implied that the RC is a wakeup source?
- Mani
--
மணிவண்ணன் சதாசிவம்
