Adhere naming to DT schema. And remove the unneeded #*-cells. Found by
'make dtbs_check'.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/usb_a9260_common.dtsi | 4 +---
arch/arm/boot/dts/microchip/usb_a9263.dts | 4 +---
arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi | 10 ++++------
3 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 19084ba75883..ae369ff04267 100644
--- a/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -128,10 +128,8 @@ user_led {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- user_pb {
+ button-user-pb {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
index e1f6dd7ed2d4..bc85d8aaf378 100644
--- a/arch/arm/boot/dts/microchip/usb_a9263.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -156,10 +156,8 @@ user_led {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- user_pb {
+ button-user-pb {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
index 08d58081201a..5b1d80c0ab26 100644
--- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -65,28 +65,26 @@ green {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- user_pb1 {
+ button-user-pb1 {
label = "user_pb1";
gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
};
- user_pb2 {
+ button-user-pb2 {
label = "user_pb2";
gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
};
- user_pb3 {
+ button-user-pb3 {
label = "user_pb3";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
};
- user_pb4 {
+ button-user-pb4 {
label = "user_pb4";
gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
--
2.45.2
