[PATCH v2 2/6] dt-bindings: phy: qcom,qmp-pcie: Drop reset number constraints

[Konrad Dybcio <konradybcio@xxxxxxxxxx>]

From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

(Almost?) all QMP PHYs come with both a "full reset" ("phy") and a
"retain certain registers" one ("phy_nocsr").

Drop the maxItems=1 constraint for resets and reset_names as we go
ahead and straighten out the DT usage. After that's done (which
will involve modifying some clock drivers etc.), we may set
*min*Items to 2, bar some possible exceptions.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml         | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 51eaffa45c18df15f93f7a3c7382415a59982793..af8c4aa4f43dfb8268c31d64ccdd5c4be7a4def5 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -220,12 +220,6 @@ allOf:
           minItems: 2
         reset-names:
           minItems: 2
-    else:
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          maxItems: 1
 
   - if:
       properties:

-- 
2.48.1