While adding interconnect support for the QCM2290 platform some of them
got the c&p error, rogue MASTER_APPSS_PROC for the config_noc
interconnect. Turn that into SLAVE_QUP_0 as expected.
Fixes: 5b970ff0193d ("arm64: dts: qcom: qcm2290: Hook up interconnects")
Reported-by: Konrad Dybcio <konradybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594d5ce5cc314c956eaca11556a9211..6e3e57dd02612f3568f07f1e198028413f463c69 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1073,7 +1073,7 @@ spi0: spi@4a80000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
@@ -1092,7 +1092,7 @@ uart0: serial@4a80000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
@@ -1137,7 +1137,7 @@ spi1: spi@4a84000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
@@ -1184,7 +1184,7 @@ spi2: spi@4a88000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
@@ -1231,7 +1231,7 @@ spi3: spi@4a8c000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
@@ -1278,7 +1278,7 @@ spi4: spi@4a90000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
@@ -1297,7 +1297,7 @@ uart4: serial@4a90000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
status = "disabled";
@@ -1342,7 +1342,7 @@ spi5: spi@4a94000 {
interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
&qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
- &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
interconnect-names = "qup-core",
"qup-config";
#address-cells = <1>;
--
2.39.5
