On 02/02/2025 19:36, Kaustabh Chakraborty wrote: > Samsung Exynos 7870 (codename: Joshua) is an ARM-v8 system-on-chip that was > announced in 2016. The chipset was found in several popular mid-range to > low-end Samsung phones, released within 2016 to 2019. > > This patch series aims to add support for Exynos 7870, starting with the > most basic yet essential components such as CPU, GPU, clock controllers, > PMIC, pin controllers, etc. > > Moreover, the series also adds support for three Exynos 7870 devices via > devicetree. The devices are: > * Samsung Galaxy J7 Prime - released 2016, codename on7xelte > * Samsung Galaxy J6 - released 2018, codename j6lte > * Samsung Galaxy A2 Core - released 2019, codename a2corelte > > Additional features implemented in this series include: > * I2C - touchscreen, IIO sensors, etc. > * UART - bluetooth and serial debugging > * MMC - eMMC, Wi-Fi SDIO, SDCard > * USB - micro-USB 2.0 interface > > The series has commits from me and Sergey, who has given me permission > to upstream their patches with proper attribution. > > Signed-off-by: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx> > --- > Kaustabh Chakraborty (26): > dt-bindings: hwinfo: samsung,exynos-chipid: add exynos7870-chipid compatible > dt-bindings: clock: document exynos7870 clock driver CMU bindings > dt-bindings: soc: samsung: exynos-pmu: add exynos7870-pmu compatible > dt-bindings: pinctrl: samsung: add exynos7870-pinctrl compatible > dt-bindings: pinctrl: samsung: add exynos7870-wakeup-eint compatible > dt-bindings: serial: samsung: add exynos7870-uart compatible > dt-bindings: mfd: samsung,s2mps11: add compatible for s2mpu05-pmic This is not related at all to this patchset. > regulator: dt-bindings: add documentation for s2mpu05-pmic regulators Neither is this. > dt-bindings: phy: samsung,usb3-drd-phy: add exynos7870-usbdrd-phy compatible > dt-bindings: usb: samsung,exynos-dwc3: add exynos7870 support > dt-bindings: gpu: arm,mali-midgard: add exynos7870 mali compatible > dt-bindings: i2c: samsung,s3c2410: add exynos7870-i2c compatible > dt-bindings: i2c: exynos5: add exynos7870-hsi2c compatible > dt-bindings: mmc: samsung,exynos-dw-mshc: add exynos7870 support > dt-bindings: soc: samsung,boot-mode: add boot mode definitions for exynos7870 > dt-bindings: arm: samsung: add compatibles for exynos7870 devices > soc: samsung: exynos-chipid: add support for exynos7870 > clk: samsung: add exynos7870 CLKOUT support > tty: serial: samsung: add support for exynos7870 This goes to different patchset. Don't mix with SoC changes or pure bindings. Your CC list is too big. > phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk > phy: exynos5-usbdrd: use GENMASK and FIELD_PREP for Exynos5 PHY registers Different patchset. > usb: dwc3: exynos: add support for exynos7870 As well, with bindings. Please organize your patchset according to standard SoC upstream guidelines - don't mix SoC with non-Soc upstreaming or other subsystems. While putting entire SoC in one patchset is tempting, you added here totally unrelated changes like PMIC drivers. Result: 33 patches and huge cc-list bouncing from mailing lists. https://lore.kernel.org/linux-samsung-soc/CADrjBPq_0nUYRABKpskRF_dhHu+4K=duPVZX==0pr+cjSL_caQ@xxxxxxxxxxxxxx/T/#m2d9130a1342ab201ab49670fa6c858ee3724c83c https://lore.kernel.org/all/20231121-topic-sm8650-upstream-dt-v3-0-db9d0507ffd3@xxxxxxxxxx/ Best regards, Krzysztof
