On 1.02.2025 10:18 AM, Dmitry Baryshkov wrote:
> Add support for the onboard WCN3950 BT/WiFi chip. Corresponding firmware
> has been merged to linux-firmware and should be available in the next
> release.
>
> Bluetooth: hci0: setting up wcn399x
> Bluetooth: hci0: QCA Product ID :0x0000000f
> Bluetooth: hci0: QCA SOC Version :0x40070120
> Bluetooth: hci0: QCA ROM Version :0x00000102
> Bluetooth: hci0: QCA Patch Version:0x00000001
> Bluetooth: hci0: QCA controller version 0x01200102
> Bluetooth: hci0: QCA Downloading qca/cmbtfw12.tlv
> Bluetooth: hci0: QCA Downloading qca/cmnv12.bin
> Bluetooth: hci0: QCA setup on UART is completed
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
[...]
> +&uart3 {
> + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
You need to either /delete-property/ interrupts, or define
interrupts-extended in the base dt
Though thinking about it years after, I'm not super impresesed that
we have to hardcode what always is the UART_RX gpio manually, every time
> + pinctrl-0 = <&uart3_default>;
> + pinctrl-1 = <&uart3_sleep>;
> + pinctrl-names = "default", "sleep";
> + status = "okay";
Please add a newline before status
Konrad
