Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 3/3] 3430ES2 clock: Add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] 3430ES2 clock: separate 3430ES1/3430ES2 rates in clock code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: The Current status of DSS drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Mistral's OMAP2EVM support
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Mistral's OMAP2EVM support
  • From: "S.Rajeev" <srajeev@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] patch adds the EHCI glue layer to 34xx platform and menu config items
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 1/2] patch adds EHCI platform specific data to OMAP34xx board file
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 0/2] RESUBMIT: patch set adds USBHOST EHCI support for OMAP34xx
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH] ARM: OMAP2: Add pinmux support for OMAP3430 (refreshed)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] ARM: OMAP2: Add omap_ctrl_readb et al
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Clean-up mux code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2: Add pinmux support for OMAP3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Split omap_cfg_reg() into omap processor specific functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Allow registering pin mux function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] ARM: OMAP: Pin mux for 3430 and omap_ctrl_read/write
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Add pinmux support for OMAP3430 (refreshed)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Add pinmux support for OMAP3430 (refreshed)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: Add pinmux support for OMAP3430 (refreshed)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: The Current status of DSS drivers
  • From: Arun C <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Re: upstream merge schedule
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Split omap_cfg_reg() into omap processor specific functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: Allow registering pin mux function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Make OMAP dspgateway driver play nice with others
  • From: "George G. Davis" <gdavis@xxxxxxxxxx>
• Re: [PATCH 1/2] Add pin-mux support for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [no subject]
  • From: Klaus Pedersen <klaus.k.pedersen@xxxxxxxxx>
• [PATCH 2/2] Add OMAP3 mux configuration.
  • From: Klaus Pedersen <klaus.k.pedersen@xxxxxxxxx>
• [PATCH 1/2] Add pin-mux support for OMAP3
  • From: Klaus Pedersen <klaus.k.pedersen@xxxxxxxxx>
• Re: [PATCH] Make OMAP dspgateway driver play nice with others
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• x-loader in JTAG and flash
  • From: "Tim Chen" <qq1980@xxxxxxxxx>
• [PATCH] Make OMAP dspgateway driver play nice with others
  • From: "George G. Davis" <gdavis@xxxxxxxxxx>
• [PATCH] USB: OTG: Make otg_tpl come from platform_data
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [Resending PATCH 5/5] Make otg tpl come from platform_data
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] USB: OTG: Start using new otg tpl.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [Resending PATCH 3/5] Start using new otg tpl
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 5/5] USB: OTG: Make otg_tpl come from platform_data
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 4/5] USB: OTG: Add check for roothub initialization
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 3/5] USB: OTG: Start using new otg tpl.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 2/5] USB: OTG: Make otg_get_transceiver() and otg_set_transceiver() generic
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 1/5] USB: OTG: Introduce new otg.c code
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 0/5] USB OTG Targeted Peripheral List changes
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: upstream merge schedule
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH] arm: omap1: nokia770 semaphore to mutex
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] T2 RTC IRQ handler should only clear it's own IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] T2: Remove redundant clear and restore of the COR flag
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] Add defines needed by audio driver
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fixed Cortex A8 revision 1 CPU identification.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: sram: remove SCM read from plat-omap/sram.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] T2: Remove redundant clear and restore of the COR flag
  • From: Klaus Pedersen <klaus.k.pedersen@xxxxxxxxx>
• [PATCH] T2 RTC IRQ handler should only clear it's own IRQ
  • From: Klaus Pedersen <klaus.k.pedersen@xxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: upstream merge schedule
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• Re: upstream merge schedule
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Fixed Cortex A8 revision 1 CPU identification.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• RE: [PATCH 0/4] This patch set adds USBHOST EHCI support for OMAP34xx
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] arm: omap1: nokia770 semaphore to mutex
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 5/4] Clarification on ALSA patches
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• [PATCH 4/4] Enable ALSA TWL4030 codec for OMAP3430
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• [PATCH 3/4] omap_3430sdp_defconfig update to kernel version 2.6.24-rc3
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• [PATCH 1/4] Add defines needed by audio driver
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• [PATCH 0/4] OMAP3430 ALSA - TWL4030 codec support
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• Re: [PATCH] arm: omap1: nokia770 semaphore to mutex
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• Re: [PATCH] arm: omap1: nokia770 semaphore to mutex
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• sram: remove SCM read from plat-omap/sram.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• upstream merge schedule
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• [PATCH] arm: omap1: nokia770 semaphore to mutex
  • From: Daniel Walker <dwalker@xxxxxxxxxx>
• Re: The Current status of DSS drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: The Current status of DSS drivers
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] This patch set adds USBHOST EHCI support for OMAP34xx
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: issue with TWL3040 audio driver
  • From: "Chandra shekhar" <x0044955@xxxxxx>
• [PATCH 4/4] This patch adds the EHCI glue layer to OMAP34xx platform
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 3/4] This patch adds EHCI platform specific data to OMAP34xx board file
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 2/4] This patch adds EHCI TLL mux entries in mux.c and mux.h
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 0/4] This patch set adds USBHOST EHCI support for OMAP34xx
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 1/4] This patch adds EHCI menu config item for OMAP34xx
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: The Current status of DSS drivers
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [PATCH] ARM: OMAP: Add pinmux support for OMAP3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: The Current status of DSS drivers
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: The Current status of DSS drivers
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• The Current status of DSS drivers
  • From: Arun C <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: use edge/level handlers from generic IRQ framework
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 0/3] GPIO IRQ rework for generic IRQs
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: Fix GPIO IRQ unmask
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: Clear level-triggered GPIO interrupts in unmask hook
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• issue with TWL3040 audio driver
  • From: Arun K S <arunks@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Defines back the ifdef that fix compiling error in GPIO code.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap2_mcspi: fix PIO RX_ONLY transfer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM:OMAP2: updating OMAP SHA1/MD5 driver to support OMAP2430.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]TS: Fix for the TS event issue on OMAP3 ES2.0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: OMAP: Passing h2_i2c_board_info via omap_register_i2c_bus instead of i2c_register_board_info.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARCH: OMAP: Removes unnecessary __init at some extern'ed prototypes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]Fix omap2430 compilation error
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/1] ARM: OMAP: Defines back the ifdef that fix compiling error in GPIO code.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 1/1] ARM: OMAP: Defines back the ifdef that fix compiling error in GPIO code.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• RE: OMAP3430 spurious interrupts
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: OMAP3430 spurious interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3430 spurious interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: OMAP3430 spurious interrupts
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: OMAP3430 spurious interrupts
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 1/1] ARCH: OMAP: Rename i2c functions on MMC multislot support code for Siemens SX1.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/12] ARM: OMAP1: Palm Tungsten E board clean-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/12] ARM: OMAP1: PM fixes for OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3430 spurious interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: OMAP3430 spurious interrupts
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH] OMAP3: ack spurious IRQs in get_irqnr_and_base
  • From: Lauri Leukkunen <lauri.leukkunen@xxxxxxxxx>
• OMAP3430 spurious interrupts
  • From: Lauri Leukkunen <lauri.leukkunen@xxxxxxxxx>
• [PATCH 2/2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 1/2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 0/2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] omap2_mcspi: fix PIO RX_ONLY transfer
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• Re: UART1 through CSST
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH Resend] OMAP3: FLASH: Move Flash specific device info in aseparate board file
  • From: "Choraria, Rohit" <rohitkc@xxxxxx>
• Re: Watchdog driver issue on OMAP3
  • From: "nishanth menon" <menon.nishanth@xxxxxxxxx>
• RE: Watchdog driver issue on OMAP3
  • From: "Iqbal" <iqbal@xxxxxx>
• Re: [PATCH Resend] OMAP3: FLASH: Move Flash specific device info in aseparate board file
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: Passing h2_i2c_board_info via omap_register_i2c_bus instead of i2c_register_board_info on H2 board file.
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: Watchdog driver issue on OMAP3
  • From: "nishanth menon" <menon.nishanth@xxxxxxxxx>
• [PATCH 0/2] ARM: OMAP: Passing h2_i2c_board_info via omap_register_i2c_bus instead of i2c_register_board_info.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP: Passing h2_i2c_board_info via omap_register_i2c_bus instead of i2c_register_board_info on H2 board file.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP: Passing h2_i2c_board_info via omap_register_i2c_bus instead of i2c_register_board_info on H3 board file.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 1/12] ARM: OMAP1: Keymap fix for f-sample and p2-sample
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Watchdog driver issue on OMAP3
  • From: "Iqbal" <iqbal@xxxxxx>
• RE: Watchdog driver issue on OMAP3
  • From: "Iqbal" <iqbal@xxxxxx>
• Re: [PATCH] ARCH: OMAP: Fix compile error with OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Watchdog driver issue on OMAP3
  • From: Dmitry Krivoschekov <dmitry.krivoschekov@xxxxxxxxx>
• Re: Watchdog driver issue on OMAP3
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• RE: Watchdog driver issue on OMAP3
  • From: "Iqbal" <iqbal@xxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH] ARM:OMAP2: updating OMAP SHA1/MD5 driver to support OMAP2430.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH]TS: Fix for the TS event issue on OMAP3 ES2.0
  • From: "Reddy, Teerth" <teerth@xxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/12] ARM: OMAP1: PM fixes for OMAP1
  • From: Vivek Kutal <vivek.kutal@xxxxxxxxxxxx>
• [PATCH 1/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 0/1] ARM: OMAP: Fix kernel panic on I2C when booting TI H2 boards
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 11/12] ARM: OMAP1: Palm Tungsten E board clean-up
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 7/12] ARM: OMAP1: PM fixes for OMAP1
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/12] ARM: OMAP1: Keymap fix for f-sample and p2-sample
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Nokia 770 MMC multislot support
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 1/5] MMC: OMAP: Use tasklet instead of workqueue for cover switch notification
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 5/5] MMC: OMAP: Do not busy wait for end of command for ever
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 4/5] MMC: OMAP: Start new commands from work queue instead of irq
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 3/5] MMC: OMAP: Lazy clock shutdown
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 2/5] MMC: OMAP: Move failing command abortion to workqueue
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 0/5] MMC: OMAP: Fixes for N800 multislot implementation
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• RE: Regarding Best Combination for OMAP 2430
  • From: <adapa.ajith@xxxxxxxxx>
• Re: Regarding Best Combination for OMAP 2430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: [Resending: PATCH 2/6] MMC/SD board specific update for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: socket programme gives "operation not permitted"
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [Resending: PATCH 3/6]Device file update to support MMC/SD on OMAP2430/3430
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: [PATCH] Nokia 770 MMC multislot support
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: [PATCH] Fix OMAP H3 touchscreen.
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: [PATCH 1/1] ARCH: OMAP: Removes unnecessary __init at some extern'ed prototypes
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• [PATCH] Fix OMAP H3 touchscreen.
  • From: Lauro Ramos Venancio <lauro.venancio@xxxxxxxxx>
• Re: [PATCH] Fix OMAP H3 touchscreen.
  • From: "Lauro Ramos Venancio" <lauro.venancio@xxxxxxxxx>
• [PATCH] Fix OMAP H3 touchscreen.
  • From: Lauro Ramos Venancio <lauro.venancio@xxxxxxxxx>
• Re: [PATCH] Fix OMAP H3 touchscreen.
  • From: "Lauro Ramos Venancio" <lauro.venancio@xxxxxxxxx>
• Re: [PATCH] Fix OMAP H3 touchscreen.
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• Re: [PATCH] Fix OMAP H3 touchscreen.
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• [PATCH 0/1] ARCH: OMAP: Removes unnecessary __init at some extern'ed prototypes
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 1/1] ARCH: OMAP: Removes unnecessary __init at some extern'ed prototypes
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH] Fix OMAP H3 touchscreen.
  • From: Lauro Ramos Venancio <lauro.venancio@xxxxxxxxx>
• Re: PATCH MMC: OMAP: Fixes for N800 multislot implementation
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• Re: problems creating new cross-compiler
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• kexec and OMAP 2430 kernel
  • From: "Meng Hu" <meng.hu@xxxxxxxxx>
• Re: problems creating new cross-compiler
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• Re: problems creating new cross-compiler
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• Re: problems creating new cross-compiler
  • From: "Felipe Balbi" <felipebalbi@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• [RFC/PATCH 1/1] McBSP support for 2430/34XX
  • From: "Chandra shekhar" <x0044955@xxxxxx>
• [PATCH 1/1] ARCH: OMAP: Rename i2c functions on MMC multislot support code for Siemens SX1.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH 0/1] ARCH: OMAP: Rename i2c functions on MMC multislot support code for Siemens SX1.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• Re: [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: "Arnaud Patard" <arnaud.patard@xxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH]Fix omap2430 compilation error
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header filesin arch/arm/mach-omap2
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [Resending: PATCH 1/6] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 6/6]Enable HSMMC support in OMAP3430 default configuration
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [PATCH 5/6]Enable HSMMC support in OMAP2430 default configuration
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 4/6]Update OMAP2430/3430 MMC clk structures to use ID field
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 3/6]Device file update to support MMC/SD on OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 2/6] MMC/SD board specific update for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [Resending: PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARCH: OMAP: Fix compile error with OMAP1
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• PATCH MMC: OMAP: Fixes for N800 multislot implementation
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Felipe Balbi <ext-felipe.lima@xxxxxxxxx>
• Re: [RFC] [PATCH 0/2] High Speed uart support on 3430
  • From: Ville Tervo <ville.tervo@xxxxxxxxx>
• RE: [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• [PATCH 3/3] 3430 clock: Add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] 3430 clock: separate 3430ES1/3430ES2 rates in clock code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] 3430 clock: separate 3430ES1/3430ES2 clocks in clock code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] 3430 clock: add several 3430ES2-only clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [Resending: PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [PATCH] compile fix h3_mmc_init prototype definition
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• [RFC PATCH] Revert "ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X"
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• [PATCH FYI] move <asm-arm/arch-omap/tps65010.h>
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• [PATCH] ARCH: OMAP: Move board-nokia.h to hardware.h where it belongs
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP: Move board-nokia.h to hardware.h where it belongs
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• RE: [RFC] [PATCH 0/2] High Speed uart support on 3430
  • From: "Girish" <girishsg@xxxxxx>
• Re: [PATCH 0/12] OMAP1 updates for post 2.6.24
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Vacation & patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP: Move board-nokia.h to hardware.h where it belongs
  • From: arnaud.patard@xxxxxxxxxxx
• [PATCH] N800: Re-enable USB on n800_defconfig
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] ARCH: OMAP: Move board-nokia.h to hardware.h where it belongs
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] Nokia 770 MMC multislot support
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [Resending: PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: Pierre Ossman <drzeus-list@xxxxxxxxx>
• [Resending: PATCH 4/4]Update OMAP2430/3430 MMC clk structures to use ID field
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 3/4]Device file update to support MMC/SD on OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 2/4] MMC/SD board specific update for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 3/5]BQ27000 battery moniter HDQ/1-wire slave driver
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 2/5] HDQ/1-wire driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 1/5] omap2 device file update to support HDQ/1-wire for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [Resending: PATCH 1/5] omap2 device file update to supportHDQ/1-wire for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• OSK5912 audio hangup
  • From: imran erguler <imranerguler@xxxxxxxxx>
• [Resending PATCH 2/2] ARM: OMAP2: rtc board specific code
  • From: "Girish" <girishsg@xxxxxx>
• [Resending PATCH 1/1] RTC: twl4030-rtc specific code
  • From: "Girish" <girishsg@xxxxxx>
• [PATCH Resend] OMAP3: FLASH: Move Flash specific device info in aseparate board file
  • From: "Choraria, Rohit" <rohitkc@xxxxxx>
• RE: [PATCH] OMAP: FLASH: Move Flash specific device info in aseparate board file
  • From: "Choraria, Rohit" <rohitkc@xxxxxx>
• RE: OMAP2430 SDP5.0 TV Out problem
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• [PATCH 12/12] ARM: OMAP1: Update defconfigs for omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] ARM: OMAP1: Palm Tungsten E board clean-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] ARM: OMAP1: Misc clean-up
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/12] ARM: OMAP1: Use I2C bus registration helper for omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/12] ARM: OMAP1: Remove omap_sram_idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/12] ARM: OMAP1: PM fixes for OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/12] ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/12] ARM: OMAP1: Make omap1 use MMC multislot structures
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/12] ARM: OMAP1: Remove duplicate headers in OMAP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/12] ARM: OMAP1: Change the comments to C style
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/12] ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/12] ARM: OMAP1: Keymap fix for f-sample and p2-sample
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/12] OMAP1 updates for post 2.6.24
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resending PATCH 1/2] driver:twl4030-rtc specific code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 9/9] ARM: OMAP: Add MMU framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [Resending PATCH 1/2] driver:twl4030-rtc specific code
  • From: "Girish" <girishsg@xxxxxx>
• Re: [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header files in arch/arm/mach-omap2
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header files in arch/arm/mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header files in arch/arm/mach-omap2
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header files in arch/arm/mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP1: Move extern'ed prototypes to header files in arch/arm/mach-omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Remove undefined CONFIG_ARCH_OMAP242X
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH] I2C: TWL4030: Avoid declaring 1-use-only variables
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP: Section mismatch fix on board-3430sdp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP SHA1/MD5 hw accel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] I2C: TWL4030: Misc cleanups in twl4030_core.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Watchdog driver issue on OMAP3
  • From: "Hunter, Jon" <jon-hunter@xxxxxx>
• [PATCH] I2C: TWL4030: Avoid declaring 1-use-only variables
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] ARCH: OMAP: Section mismatch fix on board-3430sdp.c
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH] ARCH: OMAP2: Move extern'ed prototypes to header files in arch/arm/mach-omap2
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] ARCH: OMAP1: Move extern'ed prototypes to header files in arch/arm/mach-omap1
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] I2C: TWL4030: Misc cleanups in twl4030_gpio.c
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] I2C: TWL4030: Misc cleanups in twl4030_core.c
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH 0/2] OMAP SHA1/MD5 hw accel
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH] OMAP: FLASH: Move Flash specific device info in a separate board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH Resend] ARM: OMAP: Replace spaces with tab in drivers/i2c/chips/Makefile
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Replace spaces with tab in drivers/i2c/chips/Makefile
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH Resend v2 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resending: PATCH 1/5] omap2 device file update to support HDQ/1-wire for OMAP2430/3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resending PATCH 2/2] arch:omap2:rtc board specific code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resending PATCH 1/2] driver:twl4030-rtc specific code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 framebuffer support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Remove omap_sram_idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] [PATCH 0/2] High Speed uart support on 3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC] [PATCH 2/2] high speed uart driver: supporting header files
  • From: "Girish" <girishsg@xxxxxx>
• [RFC] [PATCH 1/2] high speed uart driver
  • From: "Girish" <girishsg@xxxxxx>
• [RFC] [PATCH 0/2] High Speed uart support on 3430
  • From: "Girish" <girishsg@xxxxxx>
• Re: [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• [PATCH] OMAP: FLASH: Move Flash specific device info in a separate board file
  • From: "Choraria, Rohit" <rohitkc@xxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name andstate_string
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Watchdog driver issue on OMAP3
  • From: "Reddy, Teerth" <teerth@xxxxxx>
• Re: [PATCH]HDQ/1-Wire document for omap2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• [PATCH]HDQ/1-Wire document for omap2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH 1/2] OMAP Security HW accel: Adding base address and interruption on header files.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH 0/2] Add support for OMAP SHA1/MD5 hw accel
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• RE: [Resending: PATCH 2/5] HDQ/1-wire driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [Resending: PATCH 2/5] HDQ/1-wire driver for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• [PATCH Resend] ARM: OMAP: Replace spaces with tab in drivers/i2c/chips/Makefile
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] ARM: OMAP: Replace spaces with tab in drivers/i2c/chips/Makefile
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend v2 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend v2 2/3] ARM: OMAP: Add support for TWL4030 USBTransceiver on OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend v2 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] Remove omap_sram_idle()
  • From: Vivek Kutal <vivek.kutal@xxxxxxxxxxxx>
• [Resending: PATCH 5/5]Update 3430 defconfig file to support HDQ/1-Wire module
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 3/5]BQ27000 battery moniter HDQ/1-wire slave driver
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 4/5]Update 2430 defconfig file to support HDQ/1-Wire module
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 2/5] HDQ/1-wire driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending: PATCH 1/5] omap2 device file update to support HDQ/1-wire for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [Resending PATCH 2/2] arch:omap2:rtc board specific code
  • From: "Girish" <girishsg@xxxxxx>
• [Resending PATCH 1/2] driver:twl4030-rtc specific code
  • From: "Girish" <girishsg@xxxxxx>
• RE: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP3: Use a single clock for both L3 and L4 DSS interface clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP3: update clk_wait_ready() for OMAP3 DSS clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: RFC: 3430 USB support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix MUSB DMA for inbound ISO endpoints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use the correct CONFIG_ARCH_OMAP24XX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Remove redundant gpio request at apollon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARCH:ARM: Fixing OMAP_GPIO_IRQ call on H2 and H4 board files.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARCH:ARM: Fixing OMAP_GPIO_IRQ call on H2 and H4 board files.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Remove omap_sram_idle()
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] I2C: ISP1301_OMAP: New-style i2c driver updates, part 1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Changing the comments on arch/arm/mach-omap*/* files to C style.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clean-up: remove duplicate headers in OMAP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MMC/H3: Removing unused variable and useless comment.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARCH:ARM: Updating omap_h3_1710_defconfig.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resending: PATCH 1/2] driver:twl4030-rtc specific
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: Remove unused cycles-to-nsec conversions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Switching over to vger mailing list
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Change mailing list for OMAP in MAINTAINERS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Re: [PATCH Resend 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix chain_a_transfer return value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] tahvo-usb: compile fix usb/gadget.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MMC/H3: Removing unused variable and useless comment.
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Change mailing list for OMAP in MAINTAINERS
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARCH:ARM: Updating omap_h3_1710_defconfig.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH 2/2] ARCH:ARM: Updating omap_h2_1610_defconfig.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: compile error: SEGMENT_SIZE undeclared
  • From: "David Cohen" <dacohen@xxxxxxxxx>
• [PATCH] MMC/H3: Removing unused variable and useless comment.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: compile error: SEGMENT_SIZE undeclared
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• compile error: SEGMENT_SIZE undeclared
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• Re: [PATCH Resend 0/3] ARM: OMAP: Patches adding TWL4030 USB support and MUSB support on 34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH Resend 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH Resend 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: Re: [PATCH Resend 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PATCH Resend 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: Regarding Java ME application programming on OMAP
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: NETDEV WATCHDOG: eth0: transmit timed out
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH Resend 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH Resend 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] clean-up: remove duplicate headers in OMAP
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• Re: [PATCH Resend 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH Resend 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH Resend 0/3] ARM: OMAP: Patches adding TWL4030 USB support and MUSB support on 34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] ARM: OMAP: Fix chain_a_transfer return value
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] Changing the comments on arch/arm/mach-omap*/* files to C style.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH 9/9] ARM: OMAP: Add MMU framework
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [Resending: PATCH 1/2] driver:twl4030-rtc specific
  • From: "Girish" <girishsg@xxxxxx>
• [Resending: PATCH 2/2] arch:omap2:rtc board specific code
  • From: "Girish" <girishsg@xxxxxx>
• [Resending: PATCH 1/2] driver:twl4030-rtc specific
  • From: "Girish" <girishsg@xxxxxx>
• [Resending: PATCH 0/2] twl4030-rtc support on 3430
  • From: "Girish" <girishsg@xxxxxx>
• Re: [PATCH] tahvo-usb: compile fix usb/gadget.h
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] tahvo-usb: compile fix usb/gadget.h
  • From: Francisco Alecrim <francisco.alecrim@xxxxxxxxxxx>
• [PATCH 1/2] I2C: ISP1301: Get rid of cpp style comments
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 2/2] I2C: ISP1301: Define better names for state_name and state_string
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: omap build problems upstream
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP1: Remove unused cycles-to-nsec conversions
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: omap build problems upstream
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• Re: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• RE: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH] ARM: OMAP2: Make control reg read/write methods inline
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• RE: [PATCH 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: Vivek Kutal <vivek.kutal@xxxxxxxxxxxx>
• [RFC/PATCH 2/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• omap build problems upstream
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 2/2] I2C: ISP1301_OMAP: New-style i2c driver updates, part 2
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• [PATCH] USB: GADGET: Compile fix for omap_udc.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 1/2] I2C: ISP1301_OMAP: New-style i2c driver updates, part 1
  • From: Felipe Balbi <felipe.lima@xxxxxxxxxxx>
• OMAP3 framebuffer support
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 4/4] ARM: OMAP3: framebuffer support for 3430SDP
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP3: Use a single clock for both L3 and L4 DSS interface clocks
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP3: update clk_wait_ready() for OMAP3 DSS clocks
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP3: add display contoller (dispc) support for 3430
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: Anderson Briglia <anderson.briglia@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP Security HW accel: Adding base address and interruption on header files.
  • From: Anderson Briglia <anderson.briglia@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Felipe Balbi <ext-felipe.lima@xxxxxxxxx>
• RE: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PATCH 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Felipe Balbi <ext-felipe.lima@xxxxxxxxx>
• Re: [RFC/PATCH 2/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [RFC/PATCH 1/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 3/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [PATCH] OMAP System Control fix for OMAP2420
  • From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
• RFC: DMA support for OMAP SHA1/MD5
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH] OMAP System Control fix for OMAP2420
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• Re: [RFC/PATCH 1/5] HDQ/1-wire support for OMAP2430/3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RFC] OMAP: DMA: Cleanup of DMA Request Lines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC/PATCH 3/4] MMC/SD Controller driver for OMAP2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• [RFC/PATCH 4/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 5/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 0/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 1/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 2/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 3/5] HDQ/1-wire support for OMAP2430/3430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: HDQ/1-wire module
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [PATCH 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH RFC Option 3] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH RFC Option 2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH RESEND v2] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH RFC] OMAP: DMA: Cleanup of DMA Request Lines
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• [PATCH] Fix MUSB DMA for inbound ISO endpoints
  • From: Hunyue Yau <hyau@xxxxxxxxxx>
• Re: MISTRAL QVGA LCD FOR OSK5912
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• [RFC/PATCH 4/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 3/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 1/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [RFC/PATCH 2/4] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• RE: [RFC 1/2] MMC/SD Controller driver for OMAP2430
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: [PATCH 9/9] ARM: OMAP: Add MMU framework
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 2/2] OMAP SHA1/MD5 module: Add suppor for SHA1/MD5 algorithm on OMAP.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH 0/2] OMAP SHA1/MD5 HW module accel
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• [PATCH 1/2] OMAP Security HW accel: Adding base address and interruption on header files.
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use the correct CONFIG_ARCH_OMAP24XX
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 9/9] ARM: OMAP: Add MMU framework
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RFC: 3430 USB support
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use the correct CONFIG_ARCH_OMAP24XX
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Use the correct CONFIG_ARCH_OMAP24XX
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Remove redundant gpio request at apollon
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• [PATCH] OMAP System Control fix for OMAP2420
  • From: David Cohen <david.cohen@xxxxxxxxxxx>
• Re: [PATCH] improve System Control Module defines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix cpu_is_omap343x()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP System Control fix for OMAP2420
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP 2: Camera: Fix device release
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] 3430 clock: minor cleanup patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] 24xx clock fixes: DSP, 54MHz APLL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/9] ARM: OMAP: Add MMU framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/9] ARM: OMAP: Add helper module for board specific I2C bus registration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/9] Add dmtimer support for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/9] ARM: OMAP: Pre-3430 clean-up for dmtimer.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/9] ARM: OMAP: Add DMA support for chaining and 3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/9] ARM: OMAP: Add 24xx GPIO debounce support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/9] ARM: OMAP: Add 3430 gpio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/9] ARM: OMAP: Add 3430 CPU identification macros
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/9] ARM: OMAP: Request DSP memory for McBSP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/9] Common omap updates for post 2.6.24
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: Patches adding TWL4030 USB support and MUSB support on 34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 1/1] OMAP System Control fix for OMAP2420
  • From: david.cohen@xxxxxxxxxxx
• [PATCH 0/1] OMAP System Control fix for OMAP2420
  • From: david.cohen@xxxxxxxxxxx
• Re: [PATCH 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: Add MUSB support for OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 2/3] ARM: OMAP: Add support for TWL4030 USB Transceiver on OMAP34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 0/3] ARM: OMAP: Patches adding TWL4030 USB support and MUSB support on 34xx
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 1/3] ARM: OMAP: Add support for USB on OMAP34XX
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] ARM: OMAP: use edge/level handlers from generic IRQ framework
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] Generic IRQ: Add unlocked version of set_irq_handler()
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: OMAP: Clear level-triggered GPIO interrupts in unmask hook
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: OMAP: Fix GPIO IRQ unmask
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH/RFC] OMAP GPIO IRQ rework for generic IRQ subsystem
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: Generic IRQs: proper edge/level via irq_chip->set_type hook
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH]TS: Fix for the TS event issue on OMAP3 ES2.0
  • From: "Reddy, Teerth" <teerth@xxxxxx>
• Re: Generic IRQs: proper edge/level via irq_chip->set_type hook
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Generic IRQs: proper edge/level via irq_chip->set_type hook
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH] ARM: OMAP 2: Camera: Fix device release
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH 4/4] 3430 clock: Fix missing enable warnings from various clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/4] 3430 clock: Add missing ICR clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/4] 3430 clock: 3430 clock: combine div2_rates
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/4] 3430 clock: 3430 clock: enable SCM clock at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/4] 3430 clock: minor cleanup patches
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: User GPLv2 for MMU, make checkpatch.pl happier
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: User GPLv2 for MMU, make checkpatch.pl happier
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP: User GPLv2 for MMU, make checkpatch.pl happier
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: OMAP3 dual-mode timer: data aborts after fclk re-enable
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: OMAP3 dual-mode timer: data aborts after fclk re-enable
  • From: Paul Walmsley <paul@xxxxxxxxx>
• OMAP3 dual-mode timer: data aborts after fclk re-enable
  • From: Kevin Hilman <kevin@xxxxxxxxxx>
• [PATCH 3/3] 24xx clock: Fix 54MHz APLL readiness test
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] 24xx clock: clarify clock structure; correct parent clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] 2430 clock: remove redundant iva2_1_fck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] 24xx clock fixes: DSP, 54MHz APLL
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: Add MMU framework
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Change MMU to use sysdev_class?
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Change MMU to use sysdev_class?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Change MMU to use sysdev_class?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: OMAP: Change MMU to use sysdev_class?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: Add MMU framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: Change MMU to use sysdev_class?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: User GPLv2 for MMU, make checkpatch.pl happier
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Adds MMC multislot for apollon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Clean up cpu.h for 24xx, 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• omap850 datasheet for independent developer
  • From: Steve Mueller <steve@xxxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] ARM: OMAP: Adds MMC multislot for apollon
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• [PATCH] Clean up cpu.h for 24xx, 34xx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] OMAP Security HW accel: Adding base address and interruption on header files.
  • From: david.cohen@xxxxxxxxxxx
• [PATCH 0/3] OMAP SHA1/MD5 HW module accel
  • From: david.cohen@xxxxxxxxxxx
• [PATCH 3/3] OMAP SHA1/MD5 module: Add suppor for SHA1 algorithm on OMAP.
  • From: david.cohen@xxxxxxxxxxx
• [PATCH 2/3] Crypto API: Add support for private data on crypto_alg struct.
  • From: david.cohen@xxxxxxxxxxx
• Re: Switching to vger mailing list
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Switching to vger mailing list, was: [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Switching to vger mailing list, was: [PATCH] ARM: OMAP: MACH-OMAP1: Fix compilation issues for OMAP1
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATH 0/3] ARM: OMAP1: Camera: Updates API usage and removes unused files
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• [PATCH] Fix cpu_is_omap343x()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: Update n800_defconfig
  • From: Carlos Aguiar <carlos.aguiar@xxxxxxxxxxx>
• Re: [PATCH] OMAP: Update n800_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] improve System Control Module defines
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] DSP: Move code to use only one dsp_common.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>