From: David Cohen <david.cohen@xxxxxxxxxxx>
Change the comments to C style
Signed-off-by: David Cohen <david.cohen@xxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap1/board-ams-delta.c | 6 +++---
arch/arm/mach-omap1/board-h2.c | 22 +++++++++++-----------
arch/arm/mach-omap1/board-h3.c | 14 +++++++-------
arch/arm/mach-omap1/board-innovator.c | 18 +++++++++---------
arch/arm/mach-omap1/board-osk.c | 18 +++++++++---------
arch/arm/mach-omap1/board-palmtt.c | 12 ++++++------
arch/arm/mach-omap1/clock.c | 7 +++----
arch/arm/mach-omap1/leds-osk.c | 4 ++--
8 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c73ca61..6aac72d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void)
}
static struct map_desc ams_delta_io_desc[] __initdata = {
- // AMS_DELTA_LATCH1
+ /* AMS_DELTA_LATCH1 */
{
.virtual = AMS_DELTA_LATCH1_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
- // AMS_DELTA_LATCH2
+ /* AMS_DELTA_LATCH2 */
{
.virtual = AMS_DELTA_LATCH2_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
- // AMS_DELTA_MODEM
+ /* AMS_DELTA_MODEM */
{
.virtual = AMS_DELTA_MODEM_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f79c0ed..4f34ef5 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -309,18 +309,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H2 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // tsc2101_configure,
- .codec_set_samplerate = NULL, // tsc2101_set_samplerate,
- .codec_clock_setup = NULL, // tsc2101_clock_setup,
- .codec_clock_on = NULL, // tsc2101_clock_on,
- .codec_clock_off = NULL, // tsc2101_clock_off,
- .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+ .codec_configure_dev = NULL, /* tsc2101_configure, */
+ .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
+ .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
+ .codec_clock_on = NULL, /* tsc2101_clock_on, */
+ .codec_clock_off = NULL, /* tsc2101_clock_off, */
+ .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h2_mcbsp1_device = {
@@ -378,11 +378,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
- .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
- // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+ .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
+ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
- .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
@@ -443,7 +443,7 @@ static void __init h2_init(void)
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
/* MMC: card detect and WP */
- // omap_cfg_reg(U19_ARMIO1); /* CD */
+ /* omap_cfg_reg(U19_ARMIO1); */ /* CD */
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
/* Irda */
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7ec7e0e..cab8516 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -388,18 +388,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
- //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
+ /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H3 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // tsc2101_configure,
- .codec_set_samplerate = NULL, // tsc2101_set_samplerate,
- .codec_clock_setup = NULL, // tsc2101_clock_setup,
- .codec_clock_on = NULL, // tsc2101_clock_on,
- .codec_clock_off = NULL, // tsc2101_clock_off,
- .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+ .codec_configure_dev = NULL, /* tsc2101_configure, */
+ .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
+ .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
+ .codec_clock_on = NULL, /* tsc2101_clock_on, */
+ .codec_clock_off = NULL, /* tsc2101_clock_off, */
+ .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h3_mcbsp1_device = {
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 7e63a41..a6a919a 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "OMAP Innovator AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+ .codec_configure_dev = NULL, /* aic23_configure, */
+ .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
+ .codec_clock_setup = NULL, /* aic23_clock_setup, */
+ .codec_clock_on = NULL, /* aic23_clock_on, */
+ .codec_clock_off = NULL, /* aic23_clock_off, */
+ .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device innovator_mcbsp1_device = {
@@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
- .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
- // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+ .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
+ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
- .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5db182d..119ae67 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "OSK AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+ .codec_configure_dev = NULL, /* aic23_configure, */
+ .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
+ .codec_clock_setup = NULL, /* aic23_clock_setup, */
+ .codec_clock_on = NULL, /* aic23_clock_on, */
+ .codec_clock_off = NULL, /* aic23_clock_off, */
+ .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device osk5912_mcbsp1_device = {
@@ -392,7 +392,7 @@ static void __init osk_mistral_init(void)
omap_cfg_reg(W13_1610_CCP_CLKM);
omap_cfg_reg(Y12_1610_CCP_CLKP);
/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
- // omap_cfg_reg(Y14_1610_CCP_DATAM);
+ /* omap_cfg_reg(Y14_1610_CCP_DATAM); */
omap_cfg_reg(W14_1610_CCP_DATAP);
/* CAM_PWDN */
@@ -404,8 +404,8 @@ static void __init osk_mistral_init(void)
pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
- // omap_cfg_reg(P19_1610_GPIO6); // BUSY
- omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
+ /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */
+ omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */
set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e47010f..0e1d318 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -145,12 +145,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmTT AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+ .codec_configure_dev = NULL, /* aic23_configure, */
+ .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
+ .codec_clock_setup = NULL, /* aic23_clock_setup, */
+ .codec_clock_on = NULL, /* aic23_clock_on, */
+ .codec_clock_off = NULL, /* aic23_clock_off, */
+ .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device palmtt_mcbsp1_device = {
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 5d9faa6..4ea2933 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,4 +1,3 @@
-//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
/*
* linux/arch/arm/mach-omap1/clock.c
*
@@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
/* FIXME: This clock seems to be necessary but no-one
* has asked for its activation. */
- if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera
- || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR
- || clk == &arm_gpio_ck // FIX: GPIO code for 1510
+ if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */
+ || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */
+ || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */
) {
printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
clk->name);
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 86de303..c94cefd 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -82,7 +82,7 @@ static void mistral_setled(void)
red = 1;
else if (hw_led_state & IDLE_LED)
green = 1;
- // else both sides are disabled
+ /* else both sides are disabled */
omap_set_gpio_dataout(GPIO_LED_GREEN, green);
omap_set_gpio_dataout(GPIO_LED_RED, red);
@@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt)
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
- // NOTE: work may still be pending!!
+ /* NOTE: work may still be pending!! */
break;
case led_claim:
--
1.5.3.6
-
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
