Re: [PATCH] Remove omap_sram_idle()

[Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>]

Vivek Kutal wrote:
> 	This patch removes omap_sram_idle().
>
> Signed-off-by: Vivek Kutal <vivek.kutal@xxxxxxxxxxxx>
> ---

Please switch over to new ML:

http://vger.kernel.org/vger-lists.html#linux-omap

Dirk

>  arch/arm/mach-omap1/pm.c    |    8 +--
>  arch/arm/mach-omap1/sleep.S |  161 -------------------------------------------
>  2 files changed, 1 insertions(+), 168 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
> index 647c58e..c5a89cd 100644
> --- a/arch/arm/mach-omap1/pm.c
> +++ b/arch/arm/mach-omap1/pm.c
> @@ -676,23 +676,17 @@ static int __init omap_pm_init(void)
>  	 * memory the MPU can see when it wakes up.
>  	 */
>  	if (cpu_is_omap730()) {
> -		omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
> -						omap730_idle_loop_suspend_sz);
>  		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
>  						   omap730_cpu_suspend_sz);
>  	} else if (cpu_is_omap15xx()) {
> -		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
> -						omap1510_idle_loop_suspend_sz);
>  		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
>  						   omap1510_cpu_suspend_sz);
>  	} else if (cpu_is_omap16xx()) {
> -		omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
> -						omap1610_idle_loop_suspend_sz);
>  		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
>  						   omap1610_cpu_suspend_sz);
>  	}
>  
> -	if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
> +	if (omap_sram_suspend == NULL) {
>  		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
>  		return -ENODEV;
>  	}
> diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
> index abef33d..68f5b39 100644
> --- a/arch/arm/mach-omap1/sleep.S
> +++ b/arch/arm/mach-omap1/sleep.S
> @@ -39,167 +39,6 @@
>  
>  		.text
>  
> -/*
> - * Forces OMAP into idle state
> - *
> - * omapXXXX_idle_loop_suspend()
> - *
> - * Note: This code get's copied to internal SRAM at boot. When the OMAP
> - *	 wakes up it continues execution at the point it went to sleep.
> - *
> - * Note: Because of slightly different configuration values we have
> - *       processor specific functions here.
> - */
> -
> -#if defined(CONFIG_ARCH_OMAP730)
> -ENTRY(omap730_idle_loop_suspend)
> -
> -	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
> -
> -	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
> -	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
> -
> -	@ turn off clock domains
> -	@ get ARM_IDLECT2 into r2
> -	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
> -	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
> -	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -
> -	@ request ARM idle
> -	@ get ARM_IDLECT1 into r1
> -	ldrh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -	orr	r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff
> -	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	mov	r5, #IDLE_WAIT_CYCLES & 0xff
> -	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
> -l_730:	subs	r5, r5, #1
> -	bne	l_730
> -/*
> - * Let's wait for the next clock tick to wake us up.
> - */
> -	mov	r0, #0
> -	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
> -/*
> - * omap730_idle_loop_suspend()'s resume point.
> - *
> - * It will just start executing here, so we'll restore stuff from the
> - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
> - */
> -
> -	@ restore ARM_IDLECT1 and ARM_IDLECT2 and return
> -	@ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
> -	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
> -
> -ENTRY(omap730_idle_loop_suspend_sz)
> -	.word	. - omap730_idle_loop_suspend
> -#endif /* CONFIG_ARCH_OMAP730 */
> -
> -#ifdef CONFIG_ARCH_OMAP15XX
> -ENTRY(omap1510_idle_loop_suspend)
> -
> -	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
> -
> -	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
> -	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
> -
> -	@ turn off clock domains
> -	@ get ARM_IDLECT2 into r2
> -	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
> -	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
> -	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -
> -	@ request ARM idle
> -	@ get ARM_IDLECT1 into r1
> -	ldrh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -	orr	r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff
> -	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	mov	r5, #IDLE_WAIT_CYCLES & 0xff
> -	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
> -l_1510:	subs	r5, r5, #1
> -	bne	l_1510
> -/*
> - * Let's wait for the next clock tick to wake us up.
> - */
> -	mov	r0, #0
> -	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
> -/*
> - * omap1510_idle_loop_suspend()'s resume point.
> - *
> - * It will just start executing here, so we'll restore stuff from the
> - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
> - */
> -
> -	@ restore ARM_IDLECT1 and ARM_IDLECT2 and return
> -	@ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
> -	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
> -
> -ENTRY(omap1510_idle_loop_suspend_sz)
> -	.word	. - omap1510_idle_loop_suspend
> -#endif /* CONFIG_ARCH_OMAP15XX */
> -
> -#if defined(CONFIG_ARCH_OMAP16XX)
> -ENTRY(omap1610_idle_loop_suspend)
> -
> -	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
> -
> -	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
> -	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
> -	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
> -
> -	@ turn off clock domains
> -	@ get ARM_IDLECT2 into r2
> -	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
> -	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
> -	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -
> -	@ request ARM idle
> -	@ get ARM_IDLECT1 into r1
> -	ldrh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -	orr	r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff
> -	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	mov	r5, #IDLE_WAIT_CYCLES & 0xff
> -	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
> -l_1610:	subs	r5, r5, #1
> -	bne	l_1610
> -/*
> - * Let's wait for the next clock tick to wake us up.
> - */
> -	mov	r0, #0
> -	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
> -/*
> - * omap1610_idle_loop_suspend()'s resume point.
> - *
> - * It will just start executing here, so we'll restore stuff from the
> - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
> - */
> -
> -	@ restore ARM_IDLECT1 and ARM_IDLECT2 and return
> -	@ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2
> -	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
> -	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
> -
> -	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
> -
> -ENTRY(omap1610_idle_loop_suspend_sz)
> -	.word	. - omap1610_idle_loop_suspend
> -#endif /* CONFIG_ARCH_OMAP16XX */
>  
>  /*
>   * Forces OMAP into deep sleep state

-
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html