Gluster Users - Date Index
[Prev Page][Next Page]
- Creating a large pre-allocated qemu-img raw image takes too long and fails on fuse
- From: "Jacobson, Erik" <erik.jacobson@xxxxxxx>
- Re: Confusion supreme
- From: Zenon Panoussis <oracle@xxxxxxxxxxxxxxx>
- Re: Confusion supreme
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Glusterfs community status
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Glusterfs community status
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Glusterfs community status
- From: Kyle Maas <kyle@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: Glusterfs community status
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: Glusterfs community status
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Glusterfs community status
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Problems creating or renaming directories and files in gluster volume, via SAMBA
- From: Carlo Rodrigues <carlo.rodrigues@xxxxxxxxxxxx>
- Re: Confusion supreme
- From: Zenon Panoussis <oracle@xxxxxxxxxxxxxxx>
- Confusion supreme
- From: Zenon Panoussis <oracle@xxxxxxxxxxxxxxx>
- Trouble with data size in a Distributed-Replicated 2 x 3 = 6 volume
- From: ARDOUIN OLIVIER <o-ardouin@xxxxxxxxxxxxxxxxxx>
- After restoring the failed host and synchronizing the data, it prompts that there are unsynchronized items
- From: ZiYi Liu <lzy19930211@xxxxxxxxx>
- Re: [EXT] Replace broken host, keeping the existing bricks
- Re: [EXT] Replace broken host, keeping the existing bricks
- From: Stefan Solbrig <stefan.solbrig@xxxxx>
- Replace broken host, keeping the existing bricks
- Re: Gluster 11.1 - heal hangs (again)
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Gluster 11.1 - heal hangs (again)
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Gluster 11.1 - heal hangs (again)
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Glusterfs 10.5-1 healing issues
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Glusterfs 10.5-1 healing issues
- From: Darrell Budic <budic@xxxxxxxxxxxxxxxx>
- Re: Glusterfs 10.5-1 healing issues
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Glusterfs 10.5-1 healing issues
- From: Darrell Budic <budic@xxxxxxxxxxxxxxxx>
- Glusterfs 10.5-1 healing issues
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Theodore Buchwald <buchwald@xxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Theodore Buchwald <buchwald@xxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster Rebalance question
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Adding storage capacity to a production disperse volume
- From: Thomas Pries <thomas-pries@xxxxxx>
- Adding storage capacity to a production disperse volume
- From: Theodore Buchwald <buchwald@xxxxxxxx>
- Gluster Rebalance question
- From: "Patrick Dijkgraaf" <bolderbast@xxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- for crypto-currency - monero
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Re: gluster volume tier option missing
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- gluster volume tier option missing
- From: garcetto <garcetto@xxxxxxxxx>
- How to replace a brick in a dispersed volume?
- From: Thomas Pries <thomas-pries@xxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: geo-replication {error=12} on one primary node
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: geo-replication {error=12} on one primary node
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: geo-replication {error=12} on one primary node
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- geo-replication {error=12} on one primary node
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: __Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Canceled event: Gluster Community Meeting @ Tue Apr 9, 2024 14:30 - 15:30 (GMT+5:30) (gluster-users@xxxxxxxxxxx)
- From: Nikhil Ladha <nladha@xxxxxxxxxx>
- Canceled event: Gluster Community Meeting @ (GMT+5:30) (gluster-users@xxxxxxxxxxx)
- From: Nikhil Ladha <nladha@xxxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Graceful shutdown doesn't stop all Gluster processes
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Graceful shutdown doesn't stop all Gluster processes
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Challenges with Replicated Gluster volume after stopping Gluster on any node.
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- to heal gfid which is not there
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Premium Gluster packages
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Heal failure
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Gluster communication via TLS client problem
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Gluster communication via TLS client problem
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Questions about snapshots
- From: Varun <vrn.shastry@xxxxxxxxx>
- Re: Questions about snapshots
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Questions about snapshots
- From: Varun <vrn.shastry@xxxxxxxxx>
- Geo-replication status is getting Faulty after few seconds
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Questions about snapshots
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Heal failure
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Upgrade 10.4 -> 11.1 making problems
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Filled up file system and glusterd not working anymore. To probe or not to probe?
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Filled up file system and glusterd not working anymore. To probe or not to probe?
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Files exist, but sometimes are not seen by the clients: "No such file or directory"
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Files exist, but sometimes are not seen by the clients: "No such file or directory"
- From: Carlo Rodrigues <carlo.rodrigues@xxxxxxxxxxxx>
- Pre Validation failed on 192.168.3.31. Volume gv1 does not exist
- From: Paul Watson <paul@xxxxxxxxxx>
- Re: Replacing Failed Server Failing
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Replacing Failed Server Failing
- From: duluxoz <duluxoz@xxxxxxxxx>
- Re: Gluster 11 OP version
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster 11 OP version
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster -> Ceph
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Gluster -> Ceph
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: Gluster -> Ceph
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- unable to mount at boot but fine later
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Re: Gluster -> Ceph
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster -> Ceph
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: Gluster -> Ceph
- From: Alvin Starr <alvin@xxxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster -> Ceph
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster -> Ceph
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Danny <dbray925+gluster@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Danny <dbray925+gluster@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Ramon Selga <ramon.selga@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Ramon Selga <ramon.selga@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Danny <dbray925+gluster@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Danny <dbray925+gluster@xxxxxxxxx>
- Re: Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster Performance - 12 Gbps SSDs and 10 Gbps NIC
- From: Danny <dbray925+gluster@xxxxxxxxx>
- Re: Gluster 9.3 not distributing data evenly across bricks
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Gluster 9.3 not distributing data evenly across bricks
- From: Shreyansh Shah <shreyansh.shah@xxxxxxxxxxxxxx>
- Re: Rebuilding a failed cluster
- From: Richard Betel <emteeoh@xxxxxxxxx>
- Re: Rebuilding a failed cluster
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Rebuilding a failed cluster
- From: Richard Betel <emteeoh@xxxxxxxxx>
- Is there a way to short circuit the georeplication process?
- From: Alvin Starr <alvin@xxxxxxxxxx>
- Gluster project maintenance - State of Gluster project
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: [Gluster-devel] Announcing Gluster release 11.1
- From: Michael Scherer <mscherer@xxxxxxxxxx>
- Re: Announcing Gluster release 11.1
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Announcing Gluster release 11.1
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Announcing Gluster release 11.1
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Announcing Gluster release 11.1
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Announcing Gluster release 10.5
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Re: Announcing Gluster release 11.1
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Apt doesn't work.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Verify limit-objects from clients in Gluster9 ?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Verify limit-objects from clients in Gluster9 ?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: strange link files
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Announcing Gluster release 11.1
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Dispersed Volume Errors after failed expansion
- From: edrock200 <edrock200@xxxxxxxxxxxxxx>
- Verify limit-objects from clients in Gluster9 ?
- From: "difa.csi" <difa.csi@xxxxxxxx>
- strange link files
- From: Stefan Solbrig <stefan.solbrig@xxxxx>
- Re: Gluster Geo replication
- From: Alvin Starr <alvin@xxxxxxxxxx>
- Re: Gluster Geo replication
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: Gluster Geo replication
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Gluster Geo replication
- From: dev devops <dev.devops12@xxxxxxxxx>
- Future of GlusteFS
- From: JHI Star <jhistarlink@xxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] State of the gluster project
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] State of the gluster project
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] State of the gluster project
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] State of the gluster project
- From: W Kern <wkmail@xxxxxxxxx>
- Gluster heal script?
- From: "difa.csi" <difa.csi@xxxxxxxx>
- Re: State of the gluster project
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] State of the gluster project
- From: wk <wkmail@xxxxxxxxx>
- Re: State of the gluster project
- From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
- Re: State of the gluster project
- From: Zakhar Kirpichenko <zakhar@xxxxxxxxx>
- Re: State of the gluster project
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: State of the gluster project
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: State of the gluster project
- From: Aravinda <aravinda@xxxxxxxxxxx>
- Re: State of the gluster project
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: State of the gluster project
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: State of the gluster project
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: State of the gluster project
- From: Zakhar Kirpichenko <zakhar@xxxxxxxxx>
- State of the gluster project
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Replace faulty host
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Replace faulty host
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Replace faulty host
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Oct 10, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Stale file content
- From: Norbert Hartl <norbert@xxxxxxxxxx>
- gluster volume status shows -> Online "N" after node reboot.
- From: Martin Decker <martin.decker@xxxxxxxxxxxxxxxxx>
- Re: Full docementation of available volume setting
- From: Omri Sarig <omri.sarig@xxxxxxxxx>
- mount volumes ON the arbiter?
- From: W Kern <wkmail@xxxxxxxxx>
- Re: Full docementation of available volume setting
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- GlusterFS, move files, Samba ACL...
- From: Marco Gaiarin <gaio@xxxxxxxxxxxxxxxxx>
- Full docementation of available volume setting
- From: Omri Sarig <omri.sarig@xxxxxxxxx>
- Recovering files "lost" during a rebalance on a Dispersed 3+1
- From: Jeremy Davis-Turak <jeremy@xxxxxxxxxxxx>
- GlusterFS, move files, Samba ACL...
- From: Marco Gaiarin <gaio@xxxxxxxxxxxxxxxxx>
- Re: Stale file content
- From: Norbert Hartl <norbert@xxxxxxxxxx>
- Re: orphaned snapshots
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster client version vs gluster server
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Stale file content
- From: Norbert Hartl <norbert@xxxxxxxxxx>
- Re: orphaned snapshots
- From: Sebastian Neustein <sebastian.neustein@xxxxxxxxxxxxx>
- Gluster client version vs gluster server
- From: Roy Sigurd Karlsbakk <roy@xxxxxxxxxxxxx>
- Re: .glusterfs is over 900GB
- From: Alexander Schreiber <als@xxxxxxxxxxxxxxx>
- .glusterfs is over 900GB
- From: Tim King-Kehl <twking-k@xxxxxx>
- Re: Rebuilding a failed cluster
- From: Arno Karner <arnokarner@xxxxxxxxx>
- Re: Rebuilding a failed cluster
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Rebuilding a failed cluster
- From: Richard Betel <emteeoh@xxxxxxxxx>
- Re: orphaned snapshots
- From: Sebastian Neustein <sebastian.neustein@xxxxxxxxxxxxx>
- Re: orphaned snapshots
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- orphaned snapshots
- From: Sebastian Neustein <sebastian.neustein@xxxxxxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] log file spewing on one node but not the
- From: W Kern <wkmail@xxxxxxxxx>
- Re: log file spewing on one node, but not the others
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster CLI problem during oVirt Installation
- From: "Thyen, Niko" <niko.thyen@xxxxxxxxxxx>
- Re: [EXT] [Glusterusers] RESOLVED log file spewing on one node but not the othe
- From: wk <wkmail@xxxxxxxxx>
- log file spewing on one node, but not the others
- From: W Kern <wkmail@xxxxxxxxx>
- Re: Proper command for replace-brick on distribute–replicate?
- From: Alan Orth <alan.orth@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Jul 11, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: remove_me files building up
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- need qemu + gfapi for alma 9
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: Core file right on the root partition?!?!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Core file right on the root partition?!?!
- From: Anoop C S <anoopcs@xxxxxxxxxxxxx>
- Core file right on the root partition?!?!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: remove_me files building up
- From: Liam Smith <liam.smith@xxxxx>
- Convert replica 2 volume to volume with thin-arbiter
- From: Son Goku <zakonuzemunu@xxxxxxxxx>
- Re: Simple quota in GlusterFS 11
- From: Alan Orth <alan.orth@xxxxxxxxx>
- Re: remove_me files building up
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: remove_me files building up
- From: Liam Smith <liam.smith@xxxxx>
- Re: remove_me files building up
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: remove_me files building up
- From: Liam Smith <liam.smith@xxxxx>
- Re: remove_me files building up
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: remove_me files building up
- From: Liam Smith <liam.smith@xxxxx>
- Re: remove_me files building up
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- remove_me files building up
- From: Liam Smith <liam.smith@xxxxx>
- Re: remove snapshot when one peer is dead
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: remove snapshot when one peer is dead
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- remove snapshot when one peer is dead
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: How to find out data alignment for LVM thin volume brick
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Geo replication procedure for DR
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Using glusterfs for virtual machines with qcow2 images
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to find out data alignment for LVM thin volume brick
- From: mabi <mabi@xxxxxxxxxxxxx>
- Re: Geo replication procedure for DR
- From: mabi <mabi@xxxxxxxxxxxxx>
- Re: Using glusterfs for virtual machines with qcow2 images
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: How to find out data alignment for LVM thin volume brick
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Qustionmark in permission and Owner
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Geo replication procedure for DR
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Using glusterfs for virtual machines with qcow2 images
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- How to find out data alignment for LVM thin volume brick
- From: mabi <mabi@xxxxxxxxxxxxx>
- Re: [EXT] [Glusterusers] Using glusterfs for virtual machines with qco
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Geo replication procedure for DR
- From: mabi <mabi@xxxxxxxxxxxxx>
- Re: [EXT] [Glusterusers] Using glusterfs for virtual machines with qco
- From: Christian Schoepplein <christian.schoepplein@xxxxxxxxx>
- Re: Qustionmark in permission and Owner
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Qustionmark in permission and Owner
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- EOL gluster9.x
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Re: [EXT] [Glusterusers] Using glusterfs for virtual machines with qco
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [EXT] [Glusterusers] Using glusterfs for virtual machines with qco
- From: Guillaume Pavese <guillaume.pavese@xxxxxxxxxxxxxxxxxxxx>
- Re: Using glusterfs for virtual machines with qcow2 images
- From: Ingo Fischer <ingo@xxxxxxxxxxxxx>
- Re: [EXT] [Glusterusers] Using glusterfs for virtual machines with qco
- From: W Kern <wkmail@xxxxxxxxx>
- Re: Using glusterfs for virtual machines with qcow2 images
- From: Ewen Chan <alpha754293@xxxxxxxxxxx>
- Using glusterfs for virtual machines with qcow2 images
- From: Christian Schoepplein <christian.schoepplein@xxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [Gluster-devel] Error in gluster v11
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Error in gluster v11
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: writing to fuse device yielded ENOENT
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: gluster, arbiter, thin-arbiter questions
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Error in gluster v11
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: 'error=No space left on device' but, there is plenty of space all nodes
- From: <brandon@xxxxxxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue May 9, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: [Gluster-devel] gluster 10.3: task glfs_fusenoti blocked for more than 120 seconds
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: 'error=No space left on device' but, there is plenty of space all nodes
- From: <brandon@xxxxxxxxxxxxx>
- Re: 'error=No space left on device' but, there is plenty of space all nodes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Simple quota in GlusterFS 11
- From: Alan Orth <alan.orth@xxxxxxxxx>
- Re: [Gluster-devel] gluster 10.3: task glfs_fusenoti blocked for more than 120 seconds
- From: Mohit Agrawal <moagrawa@xxxxxxxxxx>
- 'error=No space left on device' but, there is plenty of space all nodes
- From: <brandon@xxxxxxxxxxxxx>
- Cannot finish heal
- From: Innostus - Arnold Boer <arnold@xxxxxxxxxxxx>
- Re: Performance: lots of small files, hdd, nvme etc.
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- gluster 10.3: task glfs_fusenoti blocked for more than 120 seconds
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Announcing Gluster release 10.4
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Re: gluster csi driver
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- gluster, arbiter, thin-arbiter questions
- From: Peter P <peter.a.pfeiffer@xxxxxxxxx>
- is 10.4 released?
- From: Eli V <eliventer@xxxxxxxxx>
- writing to fuse device yielded ENOENT
- From: David Cunningham <dcunningham@xxxxxxxxxxxxx>
- mount @boot fails but only on arbiter
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Kernels different than default - problems ?
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Convert replica volume to volume with thin arbiter
- From: Son Goku <zakonuzemunu@xxxxxxxxx>
- Re: Gluster 10 used ports
- From: Alan Orth <alan.orth@xxxxxxxxx>
- Re: Rename volume?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: bind glusterd to specified interface
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Rename volume?
- From: "Ruediger Kupper" <kup@xxxxxxxxx>
- Re: Rename volume?
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Rename volume?
- From: "Ruediger Kupper" <kup@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Apr 11, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Performance: lots of small files, hdd, nvme etc.
- From: gluster-users@xxxxxxx
- bind glusterd to specified interface
- From: Gregor Burck <gregor@xxxxxxxxxxxxx>
- Re: Performance: lots of small files, hdd, nvme etc.
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: Performance: lots of small files, hdd, nvme etc.
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Performance: lots of small files, hdd, nvme etc.
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: gluster csi driver
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: gluster csi driver
- From: Joe Julian <me@xxxxxxxxxxxxxx>
- Re: gluster csi driver
- From: Amar Tumballi <amar@xxxxxxxxx>
- gluster csi driver
- From: Joe Julian <me@xxxxxxxxxxxxxx>
- Re: hardware issues and new server advice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: hardware issues and new server advice
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Re: hardware issues and new server advice
- From: Martin Bähr <mbaehr+gluster@xxxxxxxxxx>
- Re: hardware issues and new server advice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: hardware issues and new server advice
- From: Martin Bähr <mbaehr+gluster@xxxxxxxxxx>
- Re: hardware issues and new server advice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: hardware issues and new server advice
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- subnets other than bricks' - volume availability ?
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Re: hardware issues and new server advice
- From: Martin Bähr <mbaehr+gluster@xxxxxxxxxx>
- Re: can't set up geo-replication: can't fetch slave details
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: can't set up geo-replication: can't fetch slave details
- From: Kingsley Tart <gluster@xxxxxxxxxxxxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: hardware issues and new server advice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- hardware issues and new server advice
- From: Martin Bähr <mbaehr+gluster@xxxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: How to configure?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- can't set up geo-replication: can't fetch slave details
- From: Kingsley Tart <gluster@xxxxxxxxxxxxxxxxxxx>
- How to configure?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Mar 14, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Gluster 11 upgrade, glusterd crash
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Big problems after update to 9.6
- From: David Cunningham <dcunningham@xxxxxxxxxxxxx>
- Re: [EXTERNAL] Re: New Gluster volume (10.3) not healing symlinks after brick offline
- From: Matt Rubright <mrubrigh@xxxxxxxx>
- Re: New Gluster volume (10.3) not healing symlinks after brick offline
- From: Eli V <eliventer@xxxxxxxxx>
- Gluster 11.0 upgrade report
- From: Eli V <eliventer@xxxxxxxxx>
- Re: Big problems after update to 9.6
- From: Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
- Re: Big problems after update to 9.6
- From: David Cunningham <dcunningham@xxxxxxxxxxxxx>
- Re: Big problems after update to 9.6
- From: David Cunningham <dcunningham@xxxxxxxxxxxxx>
- Big problems after update to 9.6
- From: David Cunningham <dcunningham@xxxxxxxxxxxxx>
- Re: File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Re: File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Re: File\Directory not healing
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Re: Gluster 11.0 upgrade
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: Gluster 11.0 upgrade
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Gluster 11.0 upgrade
- From: Marcus Pedersén <marcus.pedersen@xxxxxx>
- Re: File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Re: failed to close Bad file descriptor on file creation after using setfattr to test latency?
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: File\Directory not healing
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- failed to close Bad file descriptor on file creation after using setfattr to test latency?
- From: Brad Clemmons Jr <brad.clemmons@xxxxxxxxx>
- Re: File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Announcing Gluster release 11.0
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Feb 14, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Quick way to fix stale gfids?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: File\Directory not healing
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- GlusterFS 11 is out!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: GlusterFS 11 is out!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: GlusterFS 11 is out!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- GlusterFS 11 is out!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- File\Directory not healing
- From: David Dolan <daithidolan@xxxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: [Gluster-devel] Regarding Glusterfs file locking
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: [Gluster-devel] Regarding Glusterfs file locking
- From: Maaz Sheikh <maaz.sheikh@xxxxxxxxxxx>
- Re: [Gluster-devel] Regarding Glusterfs file locking
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Quick way to fix stale gfids?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Regarding Glusterfs file locking
- From: Maaz Sheikh <maaz.sheikh@xxxxxxxxxxx>
- Regarding Glusterfs file locking
- From: Maaz Sheikh <maaz.sheikh@xxxxxxxxxxx>
- Re: change OS on one node
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- Corrupted object's [GFID], despite md5sum matches everywhere
- From: cYuSeDfZfb cYuSeDfZfb <cyusedfzfb@xxxxxxxxx>
- Quick way to fix stale gfids?
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: change OS on one node
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- change OS on one node
- From: Stefan Kania <stefan@xxxxxxxxxxxxxxx>
- New Gluster volume (10.3) not healing symlinks after brick offline
- From: Matt Rubright <mrubrigh@xxxxxxxx>
- output gluster volume bitrot gv0 scrub status
- From: cYuSeDfZfb cYuSeDfZfb <cyusedfzfb@xxxxxxxxx>
- Re: really large number of skipped files after a scrub
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: really large number of skipped files after a scrub
- From: cYuSeDfZfb cYuSeDfZfb <cyusedfzfb@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Wed Jan 11, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Wed Jan 11, 2023 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Arbiter node in slow network
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: [EXT] Re: [Glusterusers] Arbiter node in slow network
- From: WK <wkmail@xxxxxxxxx>
- Re: Arbiter node in slow network
- From: Alan Orth <alan.orth@xxxxxxxxx>
- Re: poor performance
- From: Jaco Kroon <jaco@xxxxxxxxx>
- Re: poor performance
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: poor performance
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: poor performance
- From: Jaco Kroon <jaco@xxxxxxxxx>
- Re: GlusterFS and sysctl tweaks.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: GlusterFS and sysctl tweaks.
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: GlusterFS and sysctl tweaks.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: GlusterFS and sysctl tweaks.
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- GlusterFS and sysctl tweaks.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: poor performance
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: poor performance
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: poor performance
- From: Jaco Kroon <jaco@xxxxxxxxx>
- Re: poor performance
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: poor performance
- From: Jaco Kroon <jaco@xxxxxxxxx>
- Re: poor performance
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- poor performance
- From: Jaco Kroon <jaco@xxxxxxxxx>
- Re: Fwd: really large number of skipped files after a scrub
- From: cYuSeDfZfb cYuSeDfZfb <cyusedfzfb@xxxxxxxxx>
- Re: Fwd: really large number of skipped files after a scrub
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Fwd: really large number of skipped files after a scrub
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Fwd: really large number of skipped files after a scrub
- From: cYuSeDfZfb cYuSeDfZfb <cyusedfzfb@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Dec 13, 2022 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- glusterfs v10.3 crashing
- From: Eli V <eliventer@xxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- [Community Announcement] Kadalu Storage 1.0 released
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: Arbiter node in slow network
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Arbiter node in slow network
- From: Filipe Alvarez <filipealvarez@xxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Doubts re: remove-brick
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Ville-Pekka Vainio <ville-pekka.vainio@xxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday from Tue Nov 8 to Mon Dec 12 (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: GlusterFS mount crash
- From: Angel Docampo <angel.docampo@xxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Ville-Pekka Vainio <ville-pekka.vainio@xxxxxx>
- Re: Doubts re: remove-brick
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Doubts re: remove-brick
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: replica performance and brick size best practice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Doubts re: remove-brick
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: replica performance and brick size best practice
- From: beer Ll <llcfhllml@xxxxxxxxx>
- Re: replica performance and brick size best practice
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Question on stale shards with distribute-replicate volume
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: Question on stale shards with distribute-replicate volume
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Nov 8, 2022 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- replica performance and brick size best practice
- From: beer Ll <llcfhllml@xxxxxxxxx>
- Question on stale shards with distribute-replicate volume
- From: Ronny Adsetts <ronny.adsetts@xxxxxxxxxxxxxxxxxxx>
- Re: Gluster 5.10 rebalance stuck
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday (IST) (gluster-users@xxxxxxxxxxx)
- From: sacharya@xxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday from Tue Oct 11 to Mon Nov 7 (IST) (gluster-users@xxxxxxxxxxx)
- From: sacharya@xxxxxxxxxx
- Re: gluster volume not healing - remote operation failed
- From: Eli V <eliventer@xxxxxxxxx>
- Re: Gluster 5.10 rebalance stuck
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: Gluster 5.10 rebalance stuck
- From: Shreyansh Shah <shreyansh.shah@xxxxxxxxxxxxxx>
- Gluster issues rebalancing
- From: Marcin Zieba <mzieba@xxxxxxxxxxxxxxx>
- Gluster 5.10 rebalance stuck
- From: Shreyansh Shah <shreyansh.shah@xxxxxxxxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: glusterfs on ovirt 4.3 problem after multiple power outages.
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: [EXT] link files not being created
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: glusterfs on ovirt 4.3 problem after multiple power outages.
- From: Γιώργος Βασιλόπουλος <g.vasilopoulos@xxxxxx>
- Re: glusterfs on ovirt 4.3 problem after multiple power outages.
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- glusterfs on ovirt 4.3 problem after multiple power outages.
- From: Γιώργος Βασιλόπουλος <g.vasilopoulos@xxxxxx>
- Re: [EXT] link files not being created
- From: Stefan Solbrig <stefan.solbrig@xxxxx>
- Re: [EXT] link files not being created
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- Re: [EXT] link files not being created
- From: Stefan Solbrig <stefan.solbrig@xxxxx>
- Re: link files not being created
- From: Xavi Hernandez <jahernan@xxxxxxxxxx>
- link files not being created
- From: Stefan Solbrig <stefan.solbrig@xxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Oct 11, 2022 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Monthly from 05:00 to 06:00 on the second Tuesday (EDT) (gluster-users@xxxxxxxxxxx)
- Updated invitation: Gluster Community Meeting @ Monthly from 05:00 to 06:00 on the second Tuesday from Tue Jul 12 to Mon Oct 10 (EDT) (gluster-users@xxxxxxxxxxx)
- Issue with disk import and disk upload - ovirt 4.5.2
- From: Proniakin Marcin <Marcin.Proniakin@xxxxxxxxxx>
- ODP: Issue with disk import and disk upload - ovirt 4.5.2
- From: Proniakin Marcin <Marcin.Proniakin@xxxxxxxxxx>
- MoM for community meeting held on 27-09-2022
- From: Nikhil Ladha <nladha@xxxxxxxxxx>
- Announcing Gluster release 10.3
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Re: Debian repository problem
- From: Emmanuel BENOIT <emmanuel.benoit@xxxxxxxxxxxxxxxxxxx>
- Re: Debian repository problem
- From: Hu Bert <revirii@xxxxxxxxxxxxxx>
- Debian repository problem
- From: Emmanuel BENOIT <emmanuel.benoit@xxxxxxxxxxxxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Sep 13, 2022 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Re: random disconnects of peers
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: random disconnects of peers
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: random disconnects of peers
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: random disconnects of peers
- From: Gionatan Danti <g.danti@xxxxxxxxxx>
- Re: random disconnects of peers
- From: dpgluster@xxxxxxxxx
- Re: Upgrading while still having heal pending entries experiences
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: gluster volume not healing - remote operation failed
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- gluster volume not healing - remote operation failed
- From: dpgluster@xxxxxxxxx
- Weird Issue / Gluster not really synced
- From: Christian Reiss <email@xxxxxxxxxxxxxxxxxx>
- Upgrading while still having heal pending entries experiences
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Gluster performance tuning for heavy small file read/writes
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster performance tuning for heavy small file read/writes
- From: Shreyansh Shah <shreyansh.shah@xxxxxxxxxxxxxx>
- Re: Load balancing
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster client getting disconnected frequently
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: How Does Gluster Failover
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: How Does Gluster Failover
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: How Does Gluster Failover
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: How Does Gluster Failover
- From: Matthew J Black <duluxoz@xxxxxxxxx>
- Re: How Does Gluster Failover
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: How Does Gluster Failover
- From: Matthew J Black <duluxoz@xxxxxxxxx>
- Re: How Does Gluster Failover
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: How Does Gluster Failover
- From: Karl Kleinpaste <karl@xxxxxxxxxxxxxx>
- How Does Gluster Failover
- From: duluxoz <duluxoz@xxxxxxxxx>
- Load balancing
- From: Nguetchouang Ngongang Kevin <kevin.nguetchouang@xxxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: need input on configuration
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: need input on configuration
- From: Robert Sander <r.sander@xxxxxxxxxxxxxxxxxxx>
- Re: need input on configuration
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- need input on configuration
- From: Karl Kleinpaste <karl@xxxxxxxxxxxxxx>
- need input on configuration
- From: Karl Kleinpaste <karl@xxxxxxxxxxxxxx>
- Gluster client getting disconnected frequently
- From: Rohit Ranjan <rohit.ranjan@xxxxxxxxxxxxxx>
- Re: Gluster usage scenarios in HPC cluster management
- From: Zeeshan Ali Shah <javaclinic@xxxxxxxxx>
- Announcing Gluster release 9.6
- From: Shwetha Acharya <sacharya@xxxxxxxxxx>
- Re: random disconnects of peers
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: random disconnects of peers
- From: dpgluster@xxxxxxxxx
- Re: random disconnects of peers
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Linking Error
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: random disconnects of peers
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: random disconnects of peers
- From: dpgluster@xxxxxxxxx
- Linking Error
- From: Rahul Thakre <rahul.thakre@xxxxxxxxxx>
- Re: random disconnects of peers
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- random disconnects of peers
- From: dpgluster@xxxxxxxxx
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Thomas Bätzler <t.baetzler@xxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Thomas Bätzler <t.baetzler@xxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: RPi (or something similar) cluster and GlusterFS - feedback?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Nico van Royen <nico@xxxxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
- Re: Directory in split brain does not heal - Gfs 9.2
- From: Thomas Bätzler <t.baetzler@xxxxxxxxxx>
- Directory in split brain does not heal - Gfs 9.2
- From: Ilias Chasapakis forumZFD <chasapakis@xxxxxxxxxxx>
- RPi (or something similar) cluster and GlusterFS - feedback?
- From: Philip Rhoades <phil@xxxxxxxxxxxxx>
- Re: GlusterFS storage driver deprecation in Kubernetes.
- From: Amar Tumballi <amarts@xxxxxxxxx>
- GlusterFS storage driver deprecation in Kubernetes.
- From: Humble Chirammal <hchiramm@xxxxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Tue Aug 9, 2022 2:30pm - 3:30pm (IST) (gluster-users@xxxxxxxxxxx)
- From: niryadav@xxxxxxxxxx
- Failures during Rebalance operation
- From: Ram N <ram_1726@xxxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: bitd.log and quotad.log flooding /var
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- Re: [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- [Community Announcement] Announcing Kadalu Storage 1.0 Beta
- From: Aravinda Vishwanathapura <aravinda@xxxxxxxxxxx>
- bitd.log and quotad.log flooding /var
- From: Diego Zuccato <diego.zuccato@xxxxxxxx>
- Re: heal failure after bricks go down
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- heal failure after bricks go down
- From: Eli V <eliventer@xxxxxxxxx>
- Re: replica2 issue - can't view, heal or delete directory
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- 2node gluster server with replica 2 and no split-brain!
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- replica2 issue - can't view, heal or delete directory
- From: David Simpson <SimpsonD4@xxxxxxxxxxxxx>
- Re: Gluster web gui
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Gluster web gui
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Gluster web gui
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Gluster web gui
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Yaniv Kaul <ykaul@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- Re: Right way to use community Gluster on genuine RHEL?
- From: Péter Károly JUHÁSZ <juhasz.peter.karoly@xxxxxxxxx>
- Right way to use community Gluster on genuine RHEL?
- From: Thomas Cameron <thomas.cameron@xxxxxxxxxxxxxxx>
- healing but not really, no split-brain - ?
- From: lejeczek <peljasz@xxxxxxxxxxx>
- Geo replicated VM disks corrupted
- Re: Apt doesn't work.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Apt doesn't work.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Re: Apt doesn't work.
- From: J B <jforums@xxxxxxxxxxx>
- Apt doesn't work.
- From: Gilberto Ferreira <gilberto.nunes32@xxxxxxxxx>
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday (IST) (gluster-users@xxxxxxxxxxx)
- From: pranith.karampuri@xxxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Monthly from 2:30pm to 3:30pm on the second Tuesday from Tue May 10 to Mon Jul 11 (IST) (gluster-users@xxxxxxxxxxx)
- From: pranith.karampuri@xxxxxxxxxxx
- Updated invitation: Gluster Community Meeting @ Tue Jul 12, 2022 14:30 - 15:30 (IST) (gluster-users@xxxxxxxxxxx)
- Updated invitation: Gluster Community Meeting @ Monthly from 14:30 to 15:30 on the second Tuesday (IST) (gluster-users@xxxxxxxxxxx)
- Re: Directory Healing not possible
- From: Diego Ercolani <diego.ercolani@xxxxxxx>
- Re: Directory Healing not possible
- From: Strahil Nikolov <hunter86_bg@xxxxxxxxx>
- MOM for the community meeting held on 28/06/2022
- From: Nikhil Ladha <nladha@xxxxxxxxxx>
[Index of Archives]
[Gluster Development]
[Linux Filesytems Development]
[Linux Kernel Development]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]