Hi Joe,
Thanks for getting back to me about this, it was helpful, and I really appreciate it.
I am, however, still (slightly) confused - *how* does the client "know" the addresses of the other servers in the cluster (for read or write purposes), when all the client has is the line in the fstab file: "gfs1:gv1 /data/gv1 glusterfs defaults 0 2"? I'm missing something, somewhere, in all of this, and I can't work out what that "something" is. :-)
Your help truely is appreciated
Cheers
Dulux-Oz
With a replica volume the client connects and writes to all the replicas directly. For reads, when a filename is looked up the client checks with all the replicas and, if the file is healthy, opens a read connection to the first replica to respond (by default).
If a server is shut down, the client receives the tcp messages that close the connection. For read operations, it chooses the next server. Writes will just continue to the remaining replicas (metadata is stored in extended attributes to inform future lookups and the self-healer of file health).
If a server crashes (no tcp finalization) the volume will pause for ping-timeout seconds (42 by default). Then continue as above. BTW, that 42 second timeout shouldn't be a big deal. The MTBF should be sufficiently far apart that this should still easily get you five or six nines.
On 8/30/22 11:55 PM, duluxoz wrote:
Hi Guys & Gals,
A Gluster newbie question for sure, but something I just don't "get" (or I've missed in the doco, mailing lists, etc):
What happens to a Gluster Client when a Gluster Cluster Node goes off-line / fails-over?
How does the Client "know" to use (connect to) another Gluster Node in the Gluster Cluster?
Let me elaborate.
I've got four hosts: gfs1, gfs2, gfs3, and client4 sitting on 192.168.1.1/24, .2, .3, and .4 respectively.
DNS is set up and working correctly.
gfs1, gs2, and gfs3 form a "Gluster Cluster" with a Gluster Volume (gv1) replicated across all three nodes. This is all working correctly (ie a file (file1) created/modified on gfs1:/gv1 is replicated correctly to gfs2:/gv1 and gfs3:/gv1).
client4 has an entry in its /etc/fstab file which reads: "gfs1:gv1 /data/gv1 glusterfs defaults 0 2". This is also all working correctly (ie client4:/data/gv1/file1 is accessible and replicated).
So, (and I haven't tested this yet) what happens to client4:/data/gv1/file1 when gfs1 fails (ie is turned off, crashes, etc)?
Does client4 "automatically" switch to using one of the other two Gluster Nodes, or do I have something wrong in clients4's /etc/fstab file, or an error/mis-configuration somewhere else?
I thought about setting some DNS entries along the lines of:
~~~
glustercluster IN A 192.168.0.1
glustercluster IN A 192.168.0.2
glustercluster IN A 192.168.0.3
~~~
and having clients4's /etc/fstab file read: "glustercluster:gv1 /data/gv1 glusterfs defaults 0 2", but this is a Round-Robin DNS config and I'm not sure how Gluster treats this situation.
So, if people could comment / point me in the correct direction I would really appreciate it - thanks.
Dulux-Oz
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
