Re: GlusterFS mount crash

[Angel Docampo <angel.docampo@xxxxxxxxxxxxx>]

Well, just happened again, the same server, the same mountpoint.

I'm unable to get the core dumps, coredumpctl says there are no core dumps, it would be funny if I wasn't the one suffering it, but systemd-coredump service crashed as well

● systemd-coredump@0-3199871-0.service - Process Core Dump (PID 3199871/UID 0)
    Loaded: loaded (/lib/systemd/system/systemd-coredump@.service; static)
    Active: failed (Result: timeout) since Fri 2022-11-25 10:54:59 CET; 39min ago
TriggeredBy: ● systemd-coredump.socket
      Docs: man:systemd-coredump(8)
   Process: 3199873 ExecStart=/lib/systemd/systemd-coredump (code=killed, signal=TERM)
  Main PID: 3199873 (code=killed, signal=TERM)
       CPU: 15ms

Nov 25 10:49:59 pve02 systemd[1]: Started Process Core Dump (PID 3199871/UID 0).
Nov 25 10:54:59 pve02 systemd[1]: systemd-coredump@0-3199871-0.service: Service reached runtime time limit. Stopping.
Nov 25 10:54:59 pve02 systemd[1]: systemd-coredump@0-3199871-0.service: Failed with result 'timeout'.

I just saw the exception on dmesg, 

[2022-11-25 10:50:08]  INFO: task kmmpd-loop0:681644 blocked for more than 120 seconds.
[2022-11-25 10:50:08]        Tainted: P          IO      5.15.60-2-pve #1
[2022-11-25 10:50:08]  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[2022-11-25 10:50:08]  task:kmmpd-loop0     state:D stack:    0 pid:681644 ppid:     2 flags:0x00004000
[2022-11-25 10:50:08]  Call Trace:
[2022-11-25 10:50:08]   <TASK>
[2022-11-25 10:50:08]   __schedule+0x33d/0x1750
[2022-11-25 10:50:08]   ? bit_wait+0x70/0x70
[2022-11-25 10:50:08]   schedule+0x4e/0xc0
[2022-11-25 10:50:08]   io_schedule+0x46/0x80
[2022-11-25 10:50:08]   bit_wait_io+0x11/0x70
[2022-11-25 10:50:08]   __wait_on_bit+0x31/0xa0
[2022-11-25 10:50:08]   out_of_line_wait_on_bit+0x8d/0xb0
[2022-11-25 10:50:08]   ? var_wake_function+0x30/0x30
[2022-11-25 10:50:08]   __wait_on_buffer+0x34/0x40
[2022-11-25 10:50:08]   write_mmp_block+0x127/0x180
[2022-11-25 10:50:08]   kmmpd+0x1b9/0x430
[2022-11-25 10:50:08]   ? write_mmp_block+0x180/0x180
[2022-11-25 10:50:08]   kthread+0x127/0x150
[2022-11-25 10:50:08]   ? set_kthread_struct+0x50/0x50
[2022-11-25 10:50:08]   ret_from_fork+0x1f/0x30
[2022-11-25 10:50:08]   </TASK>
[2022-11-25 10:50:08]  INFO: task iou-wrk-1511979:3200401 blocked for more than 120 seconds.
[2022-11-25 10:50:08]        Tainted: P          IO      5.15.60-2-pve #1
[2022-11-25 10:50:08]  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[2022-11-25 10:50:08]  task:iou-wrk-1511979 state:D stack:    0 pid:3200401 ppid:     1 flags:0x00004000
[2022-11-25 10:50:08]  Call Trace:
[2022-11-25 10:50:08]   <TASK>
[2022-11-25 10:50:08]   __schedule+0x33d/0x1750
[2022-11-25 10:50:08]   schedule+0x4e/0xc0
[2022-11-25 10:50:08]   rwsem_down_write_slowpath+0x231/0x4f0
[2022-11-25 10:50:08]   down_write+0x47/0x60
[2022-11-25 10:50:08]   fuse_file_write_iter+0x1a3/0x430
[2022-11-25 10:50:08]   ? apparmor_file_permission+0x70/0x170
[2022-11-25 10:50:08]   io_write+0xfb/0x320
[2022-11-25 10:50:08]   ? put_dec+0x1c/0xa0
[2022-11-25 10:50:08]   io_issue_sqe+0x401/0x1fc0
[2022-11-25 10:50:08]   io_wq_submit_work+0x76/0xd0
[2022-11-25 10:50:08]   io_worker_handle_work+0x1a7/0x5f0
[2022-11-25 10:50:08]   io_wqe_worker+0x2c0/0x360
[2022-11-25 10:50:08]   ? finish_task_switch.isra.0+0x7e/0x2b0
[2022-11-25 10:50:08]   ? io_worker_handle_work+0x5f0/0x5f0
[2022-11-25 10:50:08]   ? io_worker_handle_work+0x5f0/0x5f0
[2022-11-25 10:50:08]   ret_from_fork+0x1f/0x30
[2022-11-25 10:50:08]  RIP: 0033:0x0
[2022-11-25 10:50:08]  RSP: 002b:0000000000000000 EFLAGS: 00000216 ORIG_RAX: 00000000000001aa
[2022-11-25 10:50:08]  RAX: 0000000000000000 RBX: 00007fdb1efef640 RCX: 00007fdd59f872e9
[2022-11-25 10:50:08]  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000011
[2022-11-25 10:50:08]  RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000008
[2022-11-25 10:50:08]  R10: 0000000000000000 R11: 0000000000000216 R12: 000055662e5bd268
[2022-11-25 10:50:08]  R13: 000055662e5bd320 R14: 000055662e5bd260 R15: 0000000000000000
[2022-11-25 10:50:08]   </TASK>
[2022-11-25 10:52:08]  INFO: task kmmpd-loop0:681644 blocked for more than 241 seconds.
[2022-11-25 10:52:08]        Tainted: P          IO      5.15.60-2-pve #1
[2022-11-25 10:52:08]  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[2022-11-25 10:52:08]  task:kmmpd-loop0     state:D stack:    0 pid:681644 ppid:     2 flags:0x00004000
[2022-11-25 10:52:08]  Call Trace:
[2022-11-25 10:52:08]   <TASK>
[2022-11-25 10:52:08]   __schedule+0x33d/0x1750
[2022-11-25 10:52:08]   ? bit_wait+0x70/0x70
[2022-11-25 10:52:08]   schedule+0x4e/0xc0
[2022-11-25 10:52:08]   io_schedule+0x46/0x80
[2022-11-25 10:52:08]   bit_wait_io+0x11/0x70
[2022-11-25 10:52:08]   __wait_on_bit+0x31/0xa0
[2022-11-25 10:52:08]   out_of_line_wait_on_bit+0x8d/0xb0
[2022-11-25 10:52:08]   ? var_wake_function+0x30/0x30
[2022-11-25 10:52:08]   __wait_on_buffer+0x34/0x40
[2022-11-25 10:52:08]   write_mmp_block+0x127/0x180
[2022-11-25 10:52:08]   kmmpd+0x1b9/0x430
[2022-11-25 10:52:08]   ? write_mmp_block+0x180/0x180
[2022-11-25 10:52:08]   kthread+0x127/0x150
[2022-11-25 10:52:08]   ? set_kthread_struct+0x50/0x50
[2022-11-25 10:52:08]   ret_from_fork+0x1f/0x30
[2022-11-25 10:52:08]   </TASK>
[2022-11-25 10:52:08]  INFO: task iou-wrk-1511979:3200401 blocked for more than 241 seconds.
[2022-11-25 10:52:08]        Tainted: P          IO      5.15.60-2-pve #1
[2022-11-25 10:52:08]  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[2022-11-25 10:52:08]  task:iou-wrk-1511979 state:D stack:    0 pid:3200401 ppid:     1 flags:0x00004000
[2022-11-25 10:52:08]  Call Trace:
[2022-11-25 10:52:08]   <TASK>
[2022-11-25 10:52:08]   __schedule+0x33d/0x1750
[2022-11-25 10:52:08]   schedule+0x4e/0xc0
[2022-11-25 10:52:08]   rwsem_down_write_slowpath+0x231/0x4f0
[2022-11-25 10:52:08]   down_write+0x47/0x60
[2022-11-25 10:52:08]   fuse_file_write_iter+0x1a3/0x430
[2022-11-25 10:52:08]   ? apparmor_file_permission+0x70/0x170
[2022-11-25 10:52:08]   io_write+0xfb/0x320
[2022-11-25 10:52:08]   ? put_dec+0x1c/0xa0
[2022-11-25 10:52:08]   io_issue_sqe+0x401/0x1fc0
[2022-11-25 10:52:08]   io_wq_submit_work+0x76/0xd0
[2022-11-25 10:52:08]   io_worker_handle_work+0x1a7/0x5f0
[2022-11-25 10:52:08]   io_wqe_worker+0x2c0/0x360
[2022-11-25 10:52:08]   ? finish_task_switch.isra.0+0x7e/0x2b0
[2022-11-25 10:52:08]   ? io_worker_handle_work+0x5f0/0x5f0
[2022-11-25 10:52:08]   ? io_worker_handle_work+0x5f0/0x5f0
[2022-11-25 10:52:08]   ret_from_fork+0x1f/0x30
[2022-11-25 10:52:08]  RIP: 0033:0x0
[2022-11-25 10:52:08]  RSP: 002b:0000000000000000 EFLAGS: 00000216 ORIG_RAX: 00000000000001aa
[2022-11-25 10:52:08]  RAX: 0000000000000000 RBX: 00007fdb1efef640 RCX: 00007fdd59f872e9
[2022-11-25 10:52:08]  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000011
[2022-11-25 10:52:08]  RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000008
[2022-11-25 10:52:08]  R10: 0000000000000000 R11: 0000000000000216 R12: 000055662e5bd268
[2022-11-25 10:52:08]  R13: 000055662e5bd320 R14: 000055662e5bd260 R15: 0000000000000000
[2022-11-25 10:52:08]   </TASK>
[2022-11-25 10:52:12]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:12]  print_req_error: 7 callbacks suppressed
[2022-11-25 10:52:12]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:12]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:12]  EXT4-fs error (device loop0): kmmpd:179: comm kmmpd-loop0: Error writing to MMP block
[2022-11-25 10:52:12]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:12]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:12]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:18]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:18]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:18]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:18]  loop: Write error at byte offset 4490452992, length 4096.
[2022-11-25 10:52:18]  loop: Write error at byte offset 4490457088, length 4096.
[2022-11-25 10:52:18]  blk_update_request: I/O error, dev loop0, sector 8770416 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[2022-11-25 10:52:18]  blk_update_request: I/O error, dev loop0, sector 8770424 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[2022-11-25 10:52:18]  Aborting journal on device loop0-8.
[2022-11-25 10:52:18]  loop: Write error at byte offset 4429185024, length 4096.
[2022-11-25 10:52:18]  blk_update_request: I/O error, dev loop0, sector 8650752 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[2022-11-25 10:52:18]  blk_update_request: I/O error, dev loop0, sector 8650752 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[2022-11-25 10:52:18]  Buffer I/O error on dev loop0, logical block 1081344, lost sync page write
[2022-11-25 10:52:18]  JBD2: Error -5 detected when updating journal superblock for loop0-8.
[2022-11-25 10:52:23]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:23]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:23]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:28]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:28]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:28]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:33]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:33]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:33]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:38]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:38]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:38]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:43]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:43]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:43]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:48]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:48]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:48]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:53]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:53]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:53]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:52:59]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:52:59]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:52:59]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:04]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:04]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:04]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:09]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:09]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:09]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:14]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:14]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:14]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:19]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:19]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:19]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:24]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:24]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:24]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:29]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:29]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:29]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:34]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:34]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:34]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:40]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:40]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:40]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:45]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:45]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:45]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:50]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:50]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:50]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:53:55]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:53:55]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:53:55]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:00]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:00]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:00]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:05]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:05]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:05]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:10]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:10]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:10]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:15]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:15]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:15]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:21]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:21]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:21]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:26]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:26]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:26]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:31]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:31]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:31]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:36]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:36]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:36]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:41]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:41]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:41]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:46]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:46]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:46]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:51]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:51]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:51]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:54:56]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:54:56]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:54:56]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:55:01]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:55:01]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:55:01]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:55:04]  EXT4-fs error (device loop0): ext4_journal_check_start:83: comm burp: Detected aborted journal
[2022-11-25 10:55:04]  loop: Write error at byte offset 0, length 4096.
[2022-11-25 10:55:04]  blk_update_request: I/O error, dev loop0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:55:04]  blk_update_request: I/O error, dev loop0, sector 0 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:55:04]  Buffer I/O error on dev loop0, logical block 0, lost sync page write
[2022-11-25 10:55:04]  EXT4-fs (loop0): I/O error while writing superblock
[2022-11-25 10:55:04]  EXT4-fs (loop0): Remounting filesystem read-only
[2022-11-25 10:55:07]  loop: Write error at byte offset 37908480, length 4096.
[2022-11-25 10:55:07]  blk_update_request: I/O error, dev loop0, sector 74040 op 0x1:(WRITE) flags 0x3800 phys_seg 1 prio class 0
[2022-11-25 10:55:07]  Buffer I/O error on dev loop0, logical block 9255, lost sync page write
[2022-11-25 10:57:14]  blk_update_request: I/O error, dev loop0, sector 16390368 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 0
[2022-11-25 11:03:45]  device tap136i0 entered promiscuous mode

I don't know if it is relevant somehow or it is unrelated to glusterfs, but the consequences are the mountpoint crashes, I'm forced to lazy unmount it and remount it back. Then restart all the VMs on there, unfortunately, this time several have the hard disk corrupted and now I'm restoring them from the backup.

Any tip?

Angel Docampo

  

El mar, 22 nov 2022 a las 12:31, Angel Docampo (<angel.docampo@xxxxxxxxxxxxx>) escribió:

I've taken a look into all possible places they should be, and I couldn't find it anywhere. Some people say the dump file is generated where the application is running... well, I don't know where to look then, and I hope they hadn't been generated on the failed mountpoint.

As Debian 11 has systemd, I've installed systemd-coredump, so in the case a new crash happens, at least I will have the exact location and tool (coredumpctl) to find them and will install then the debug symbols, which is particularly tricky on debian. But I need to wait to happen again, now the tool says there isn't any core dump on the system.

Thank you, Xavi, if this happens again (let's hope it won't), I will report back.

Best regards!

Angel Docampo

  

El mar, 22 nov 2022 a las 10:45, Xavi Hernandez (<jahernan@xxxxxxxxxx>) escribió:

The crash seems related to some problem in ec xlator, but I don't have enough information to determine what it is. The crash should have generated a core dump somewhere in the system (I don't know where Debian keeps the core dumps). If you find it, you should be able to open it using this command (make sure debug symbols package is also installed before running it):

    # gdb /usr/sbin/glusterfs <path to core dump>

And then run this command:

    # bt -full

Regards,

Xavi

On Tue, Nov 22, 2022 at 9:41 AM Angel Docampo <angel.docampo@xxxxxxxxxxxxx> wrote:

Hi Xavi, 

The OS is Debian 11 with the proxmox kernel. Gluster packages are the official from gluster.org (https://download.gluster.org/pub/gluster/glusterfs/10/10.3/Debian/bullseye/)

The system logs showed no other issues by the time of the crash, no OOM kill or whatsoever, and no other process was interacting with the gluster mountpoint besides proxmox.

I wasn't running gdb when it crashed, so I don't really know if I can obtain a more detailed trace from logs or if there is a simple way to let it running in the background to see if it happens again (or there is a flag to start the systemd daemon in debug mode).

Best, 

Angel Docampo

  

El lun, 21 nov 2022 a las 15:16, Xavi Hernandez (<jahernan@xxxxxxxxxx>) escribió:

Hi Angel,

On Mon, Nov 21, 2022 at 2:33 PM Angel Docampo <angel.docampo@xxxxxxxxxxxxx> wrote:

Sorry for necrobumping this, but this morning I've suffered this on my Proxmox  + GlusterFS cluster. In the log I can see this

[2022-11-21 07:38:00.213620 +0000] I [MSGID: 133017] [shard.c:7275:shard_seek] 11-vmdata-shard: seek called on fbc063cb-874e-475d-b585-f89
f7518acdd. [Operation not supported]
pending frames:
frame : type(1) op(WRITE)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
frame : type(0) op(0)
...

frame : type(1) op(FSYNC)

frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)
frame : type(1) op(FSYNC)

patchset: git://git.gluster.org/glusterfs.git
signal received: 11
time of crash:  
2022-11-21 07:38:00 +0000
configuration details:
argp 1
backtrace 1
dlfcn 1
libpthread 1
llistxattr 1
setfsid 1
epoll.h 1
xattr.h 1
st_atim.tv_nsec 1
package-string: glusterfs 10.3
/lib/x86_64-linux-gnu/libglusterfs.so.0(+0x28a54)[0x7f74f286ba54]
/lib/x86_64-linux-gnu/libglusterfs.so.0(gf_print_trace+0x700)[0x7f74f2873fc0]
/lib/x86_64-linux-gnu/libc.so.6(+0x38d60)[0x7f74f262ed60]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x37a14)[0x7f74ecfcea14]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x19414)[0x7f74ecfb0414]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x16373)[0x7f74ecfad373]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x21d59)[0x7f74ecfb8d59]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x22815)[0x7f74ecfb9815]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x377d9)[0x7f74ecfce7d9]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x19414)[0x7f74ecfb0414]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x16373)[0x7f74ecfad373]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x170f9)[0x7f74ecfae0f9]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/cluster/disperse.so(+0x313bb)[0x7f74ecfc83bb]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/xlator/protocol/client.so(+0x48e3a)[0x7f74ed06ce3a]
/lib/x86_64-linux-gnu/libgfrpc.so.0(+0xfccb)[0x7f74f2816ccb]
/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_transport_notify+0x26)[0x7f74f2812646]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/rpc-transport/socket.so(+0x64c8)[0x7f74ee15f4c8]
/usr/lib/x86_64-linux-gnu/glusterfs/10.3/rpc-transport/socket.so(+0xd38c)[0x7f74ee16638c]
/lib/x86_64-linux-gnu/libglusterfs.so.0(+0x7971d)[0x7f74f28bc71d]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x7ea7)[0x7f74f27d2ea7]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x3f)[0x7f74f26f2aef]
---------
The mount point wasn't accessible with the "Transport endpoint is not connected" message and it was shown like this.

d?????????   ? ?    ?            ?            ? vmdata

I had to stop all the VMs on that proxmox node, then stop the gluster daemon to ummount de directory, and after starting the daemon and re-mounting, all was working again.

My gluster volume info returns this

 
Volume Name: vmdata
Type: Distributed-Disperse
Volume ID: cace5aa4-b13a-4750-8736-aa179c2485e1
Status: Started
Snapshot Count: 0
Number of Bricks: 2 x (2 + 1) = 6
Transport-type: tcp
Bricks:
Brick1: g01:/data/brick1/brick
Brick2: g02:/data/brick2/brick
Brick3: g03:/data/brick1/brick
Brick4: g01:/data/brick2/brick
Brick5: g02:/data/brick1/brick
Brick6: g03:/data/brick2/brick
Options Reconfigured:
nfs.disable: on
transport.address-family: inet
storage.fips-mode-rchecksum: on
features.shard: enable
features.shard-block-size: 256MB
performance.read-ahead: off
performance.quick-read: off
performance.io-cache: off
server.event-threads: 2
client.event-threads: 3
performance.client-io-threads: on
performance.stat-prefetch: off
dht.force-readdirp: off
performance.force-readdirp: off
network.remote-dio: on
features.cache-invalidation: on
performance.parallel-readdir: on
performance.readdir-ahead: on

Xavi, do you think the open-behind off setting can help somehow? I did try to understand what it does (with no luck), and if it could impact the performance of my VMs (I've the setup you know so well ;))

I would like to avoid more crashings like this, version 10.3 of gluster was working since two weeks ago, quite well until this morning.

I don't think disabling open-behind will have any visible effect on performance. Open-behind is only useful for small files when the workload is mostly open + read + close, and quick-read is also enabled (which is not your case). The only effect it will have is that the latency "saved" during open is "paid" on the next operation sent to the file, so the total overall latency should be the same. Additionally, VM workload doesn't open files frequently, so it shouldn't matter much in any case.

That said, I'm not sure if the problem is the same in your case. Based on the stack of the crash, it seems an issue inside the disperse module.

What OS are you using ? are you using official packages ?  if so, which ones ?

Is it possible to provide a backtrace from gdb ?

Regards,

Xavi

Angel Docampo

  

El vie, 19 mar 2021 a las 2:10, David Cunningham (<dcunningham@xxxxxxxxxxxxx>) escribió:

Hi Xavi,

Thank you for that information. We'll look at upgrading it.

On Fri, 12 Mar 2021 at 05:20, Xavi Hernandez <jahernan@xxxxxxxxxx> wrote:

Hi David,

with so little information it's hard to tell, but given that there are several OPEN and UNLINK operations, it could be related to an already fixed bug (in recent versions) in open-behind.

You can try disabling open-behind with this command:

    # gluster volume set <volname> open-behind off

But given the version you are using is very old and unmaintained, I would recommend you to upgrade to 8.x at least.

Regards,

Xavi

On Wed, Mar 10, 2021 at 5:10 AM David Cunningham <dcunningham@xxxxxxxxxxxxx> wrote:

Hello,

We have a GlusterFS 5.13 server which also mounts itself with the native FUSE client. Recently the FUSE mount crashed and we found the following in the syslog. There isn't anything logged in mnt-glusterfs.log for that time. After killing all processes with a file handle open on the filesystem we were able to unmount and then remount the filesystem successfully.

Would anyone have advice on how to debug this crash? Thank you in advance!

Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: pending frames:
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(0) op(0)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(0) op(0)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(1) op(UNLINK)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(1) op(UNLINK)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(1) op(OPEN)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: message repeated 3355 times: [ frame : type(1) op(OPEN)]
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(1) op(OPEN)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: message repeated 6965 times: [ frame : type(1) op(OPEN)]
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(1) op(OPEN)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: message repeated 4095 times: [ frame : type(1) op(OPEN)]
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: frame : type(0) op(0)
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: patchset: git://git.gluster.org/glusterfs.git
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: signal received: 11
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: time of crash:
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: 2021-03-09 03:12:31
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: configuration details:
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: argp 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: backtrace 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: dlfcn 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: libpthread 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: llistxattr 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: setfsid 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: spinlock 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: epoll.h 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: xattr.h 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: st_atim.tv_nsec 1
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: package-string: glusterfs 5.13
Mar 9 05:12:31 voip1 mnt-glusterfs[2932]: ---------
...
Mar 9 05:13:50 voip1 systemd[1]: glusterfssharedstorage.service: Main process exited, code=killed, status=11/SEGV
Mar 9 05:13:50 voip1 systemd[1]: glusterfssharedstorage.service: Failed with result 'signal'.
...
Mar 9 05:13:54 voip1 systemd[1]: glusterfssharedstorage.service: Service hold-off time over, scheduling restart.
Mar 9 05:13:54 voip1 systemd[1]: glusterfssharedstorage.service: Scheduled restart job, restart counter is at 2.
Mar 9 05:13:54 voip1 systemd[1]: Stopped Mount glusterfs sharedstorage.
Mar 9 05:13:54 voip1 systemd[1]: Starting Mount glusterfs sharedstorage...
Mar 9 05:13:54 voip1 mount-shared-storage.sh[20520]: ERROR: Mount point does not exist
Mar 9 05:13:54 voip1 mount-shared-storage.sh[20520]: Please specify a mount point
Mar 9 05:13:54 voip1 mount-shared-storage.sh[20520]: Usage:
Mar 9 05:13:54 voip1 mount-shared-storage.sh[20520]: man 8 /sbin/mount.glusterfs

--

David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782

________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

--

David Cunningham, Voisonics Limited
http://voisonics.com/
USA: +1 213 221 1092
New Zealand: +64 (0)28 2558 3782

________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users

________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users