|
Hi All,
I have run the following commands on master3, and that has added master3 to geo-replication.
gluster system:: execute gsec_create
gluster volume geo-replication tier1data drtier1data::drtier1data create push-pem force
gluster volume geo-replication tier1data drtier1data::drtier1data stop
gluster volume geo-replication tier1data drtier1data::drtier1data start
Now I am able to start the geo-replication, but I am getting the same error.
[2024-01-24 19:51:24.80892] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status
Change [{status=Initializing...}]
[2024-01-24 19:51:24.81020] I [monitor(monitor):160:monitor] Monitor: starting gsyncd worker [{brick=/opt/tier1data2019/brick},
{slave_node=drtier1data}]
[2024-01-24 19:51:24.158021] I [resource(worker /opt/tier1data2019/brick):1387:connect_remote] SSH: Initializing
SSH connection between master and slave...
[2024-01-24 19:51:25.951998] I [resource(worker /opt/tier1data2019/brick):1436:connect_remote] SSH: SSH
connection between master and slave established. [{duration=1.7938}]
[2024-01-24 19:51:25.952292] I [resource(worker /opt/tier1data2019/brick):1116:connect] GLUSTER: Mounting
gluster volume locally...
[2024-01-24 19:51:26.986974] I [resource(worker /opt/tier1data2019/brick):1139:connect] GLUSTER: Mounted
gluster volume [{duration=1.0346}]
[2024-01-24 19:51:26.987137] I [subcmds(worker /opt/tier1data2019/brick):84:subcmd_worker] <top>: Worker
spawn successful. Acknowledging back to monitor
[2024-01-24 19:51:29.139131] I [master(worker /opt/tier1data2019/brick):1662:register] _GMaster: Working
dir [{path=/var/lib/misc/gluster/gsyncd/tier1data_drtier1data_drtier1data/opt-tier1data2019-brick}]
[2024-01-24 19:51:29.139531] I [resource(worker /opt/tier1data2019/brick):1292:service_loop] GLUSTER: Register
time [{time=1706125889}]
[2024-01-24 19:51:29.173877] I [gsyncdstatus(worker /opt/tier1data2019/brick):281:set_active] GeorepStatus:
Worker Status Change [{status=Active}]
[2024-01-24 19:51:29.174407] I [gsyncdstatus(worker /opt/tier1data2019/brick):253:set_worker_crawl_status]
GeorepStatus: Crawl Status Change [{status=History Crawl}]
[2024-01-24 19:51:29.174558] I [master(worker /opt/tier1data2019/brick):1576:crawl] _GMaster: starting
history crawl [{turns=1}, {stime=(1705935991, 0)}, {etime=1706125889}, {entry_stime=(1705935991, 0)}]
[2024-01-24 19:51:30.251965] I [master(worker /opt/tier1data2019/brick):1605:crawl] _GMaster: slave's time
[{stime=(1705935991, 0)}]
[2024-01-24 19:51:30.376715] E [syncdutils(worker /opt/tier1data2019/brick):346:log_raise_exception] <top>:
Gluster Mount process exited [{error=ENOTCONN}]
[2024-01-24 19:51:30.991856] I [monitor(monitor):228:monitor] Monitor: worker died in startup phase [{brick=/opt/tier1data2019/brick}]
[2024-01-24 19:51:30.993608] I [gsyncdstatus(monitor):248:set_worker_status] GeorepStatus: Worker Status
Change [{status=Faulty}]
Any idea why it's stuck in this loop?
Thanks,
Anant
From: Gluster-users <gluster-users-bounces@xxxxxxxxxxx> on behalf of Anant Saraswat <anant.saraswat@xxxxxxxxxxxxxx>
Sent: 22 January 2024 9:00 PM To: gluster-users@xxxxxxxxxxx <gluster-users@xxxxxxxxxxx> Subject: [Gluster-users] Geo-replication status is getting Faulty after few seconds EXTERNAL: Do not click links or open attachments if you do not recognize the sender.
Hi There,
We have a Gluster setup with three master nodes in replicated mode and one slave node
with geo-replication.
# gluster volume info
Volume Name: tier1data
Type: Replicate
Volume ID: 93c45c14-f700-4d50-962b-7653be471e27
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x 3 = 3
Transport-type: tcp
Bricks:
Brick1: master1:/opt/tier1data2019/brick
Brick2: master2:/opt/tier1data2019/brick
Brick3: master3:/opt/tier1data2019/brick
master1 |
master2 | ------------------------------geo-replication----------------------------- | drtier1data master3 | We added the master3 node a few months back, the initial setup consisted of 2 master
nodes and one geo-replicated slave(drtier1data).
Our geo-replication was functioning well with the initial two master nodes (master1
and master2), where master1 was active and master2 was in passive mode. However, today, we started experiencing issues where geo-replication suddenly stopped and became stuck in a loop of Initializing..., Active.. Faulty on master1, while master2 remained
in passive mode.
Upon checking the gsyncd.log on the master1 node,
we observed the following error (please refer to the attached logs for more details):
# gluster volume geo-replication tier1data status MASTER
NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
master1
tier1data /opt/tier1data2019/brick root ssh://drtier1data::drtier1data N/A Faulty N/A N/A
master2
tier1data /opt/tier1data2019/brick root ssh://drtier1data::drtier1data Passive N/A N/A
Suspecting an issue on the drtier1data(slave), I attempted to restart Gluster on the
slave node, also tried to restart drtier1data server
without any luck.
After that I tried the following command to get the Primary-log-file for geo-replication
on master1, and got the following error.
# gluster volume geo-replication tier1data drtier1data::drtier1data config log-file
Staging failed on master3. Error: Geo-replication session between tier1data
and drtier1data::drtier1data does not exist.
geo-replication command failed
Master3 was the new node added a few months back,
but geo-replication was working until today, and we never added this node under geo-replication. After that, I forcefully stopped the geo-replication,
thinking that restarting geo-replication might fix the issue. However, now the geo-replication is not starting and is giving the same error. # gluster volume geo-replication tier1data drtier1data::drtier1data start force
Staging failed on master3. Error: Geo-replication session between tier1data
and drtier1data::drtier1data does not exist.
geo-replication command failed
Can anyone please suggest what I should do next to resolve this issue? As there is
5TB of data in this volume, I don't want to resync the entire data to drtier1data. Instead, I want to resume the sync from where it last stopped.
Thanks in advance for any guidance/help.
Kind regards,
Anant
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the sender. This message contains confidential
information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this
email from your system.
DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please
notify the sender. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if
you have received this email by mistake and delete this email from your system. |
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
