Actually, check on all nodes and script it - you might need it in the future.
Simplest way to resolve is to make the file didappear (rename to something else and then rename it back). Another easy trick is to read thr whole file: dd if=file of=/dev/null status=progress
Best Regards,
Strahil Nikolov
On Sat, Jan 27, 2024 at 8:24, Hu Bert<revirii@xxxxxxxxxxxxxx> wrote:Morning,gfid1:getfattr -d -e hex -m./gluster/md{3,4,5,6,7}/workdata/.glusterfs/fa/f5/faf59566-10f5-4ddd-8b0c-a87bc6a334fbglusterpub1 (good one):getfattr: Removing leading '/' from absolute path names# file: gluster/md6/workdata/.glusterfs/fa/f5/faf59566-10f5-4ddd-8b0c-a87bc6a334fbtrusted.afr.dirty=0x000000000000000000000000trusted.afr.workdata-client-11=0x000000020000000100000000trusted.gfid=0xfaf5956610f54ddd8b0ca87bc6a334fbtrusted.gfid2path.c2845024cc9b402e=0x38633139626234612d396236382d343532652d623434652d3664616331666434616465652f31323878313238732e6a7067trusted.glusterfs.mdata=0x0100000000000000000000000065aaecff000000002695ebb70000000065aaecff000000002695ebb70000000065aaecff000000002533f110glusterpub3 (bad one):getfattr: /gluster/md6/workdata/.glusterfs/fa/f5/faf59566-10f5-4ddd-8b0c-a87bc6a334fb:No such file or directorygfid 2:getfattr -d -e hex -m./gluster/md{3,4,5,6,7}/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642glusterpub1 (good one):getfattr: Removing leading '/' from absolute path names# file: gluster/md5/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642trusted.afr.dirty=0x000000000000000000000000trusted.afr.workdata-client-8=0x000000020000000100000000trusted.gfid=0x604657235dc04ebeaced9f2c12e52642trusted.gfid2path.ac4669e3c4faf926=0x33366463366137392d666135642d343238652d613738642d6234376230616662316562642f31323878313238732e6a7067trusted.glusterfs.mdata=0x0100000000000000000000000065aaecfe000000000c5403bd0000000065aaecfe000000000c5403bd0000000065aaecfe000000000ad61ee4glusterpub3 (bad one):getfattr: /gluster/md5/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642:No such file or directorythx,HubertAm Sa., 27. Jan. 2024 um 06:13 Uhr schrieb Strahil Nikolov>> You don't need to mount it.> Like this :> # getfattr -d -e hex -m. /path/to/brick/.glusterfs/00/46/00462be8-3e61-4931-8bda-dae1645c639e> # file: 00/46/00462be8-3e61-4931-8bda-dae1645c639e> trusted.gfid=0x00462be83e6149318bdadae1645c639e> trusted.gfid2path.05fcbdafdeea18ab=0x30326333373930632d386637622d346436652d393464362d3936393132313930643131312f66696c656c6f636b696e672e7079> trusted.glusterfs.mdata=0x010000000000000000000000006170340c0000000025b6a745000000006170340c0000000020efb577000000006170340c0000000020d42b07> trusted.glusterfs.shard.block-size=0x0000000004000000> trusted.glusterfs.shard.file-size=0x00000000000000cd000000000000000000000000000000010000000000000000>>> Best Regards,> Strahil Nikolov>>>> В четвъртък, 25 януари 2024 г. в 09:42:46 ч. Гринуич+2, Hu Bert <revirii@xxxxxxxxxxxxxx> написа:>>>>>> Good morning,>> hope i got it right... using:>> mount -t glusterfs -o aux-gfid-mount glusterpub1:/workdata /mnt/workdata>> gfid 1:> getfattr -n trusted.glusterfs.pathinfo -e text> /mnt/workdata/.gfid/faf59566-10f5-4ddd-8b0c-a87bc6a334fb> getfattr: Removing leading '/' from absolute path names> # file: mnt/workdata/.gfid/faf59566-10f5-4ddd-8b0c-a87bc6a334fb> trusted.glusterfs.pathinfo="(<DISTRIBUTE:workdata-dht>> (<REPLICATE:workdata-replicate-3>> <POSIX(/gluster/md6/workdata):glusterpub1:/gluster/md6/workdata/images/133/283/13328349/128x128s.jpg>> <POSIX(/gluster/md6/workdata):glusterpub2:/gl> uster/md6/workdata/images/133/283/13328349/128x128s.jpg>))">> gfid 2:> getfattr -n trusted.glusterfs.pathinfo -e text> /mnt/workdata/.gfid/60465723-5dc0-4ebe-aced-9f2c12e52642> getfattr: Removing leading '/' from absolute path names> # file: mnt/workdata/.gfid/60465723-5dc0-4ebe-aced-9f2c12e52642> trusted.glusterfs.pathinfo="(<DISTRIBUTE:workdata-dht>> (<REPLICATE:workdata-replicate-2>> <POSIX(/gluster/md5/workdata):glusterpub2:/gluster/md5/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642>> <POSIX(/gluster/md5/workdata> ):glusterpub1:/gluster/md5/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642>))">> glusterpub1 + glusterpub2 are the good ones, glusterpub3 is the> misbehaving (not healing) one.>> The file with gfid 1 is available under> /gluster/md6/workdata/images/133/283/13328349/ on glusterpub1+2> bricks, but missing on glusterpub3 brick.>> gfid 2: /gluster/md5/workdata/.glusterfs/60/46/60465723-5dc0-4ebe-aced-9f2c12e52642> is present on glusterpub1+2, but not on glusterpub3.>>> Thx,> Hubert>> Am Mi., 24. Jan. 2024 um 17:36 Uhr schrieb Strahil Nikolov>> >> > Hi,> >> > Can you find and check the files with gfids:> > 60465723-5dc0-4ebe-aced-9f2c12e52642> > faf59566-10f5-4ddd-8b0c-a87bc6a334fb> >> > Use 'getfattr -d -e hex -m. ' command from https://docs.gluster.org/en/main/Troubleshooting/resolving-splitbrain/#analysis-of-the-output .> >> > Best Regards,> > Strahil Nikolov> >> > On Sat, Jan 20, 2024 at 9:44, Hu Bert> > <revirii@xxxxxxxxxxxxxx> wrote:> > Good morning,> >> > thx Gilberto, did the first three (set to WARNING), but the last one> > doesn't work. Anyway, with setting these three some new messages> > appear:> >> > [2024-01-20 07:23:58.561106 +0000] W [MSGID: 114061]> > [client-common.c:796:client_pre_lk_v2] 0-workdata-client-11: remote_fd> > is -1. EBADFD [{gfid=faf59566-10f5-4ddd-8b0c-a87bc6a334fb},> > {errno=77}, {error=File descriptor in bad state}]> > [2024-01-20 07:23:58.561177 +0000] E [MSGID: 108028]> > [afr-open.c:361:afr_is_reopen_allowed_cbk] 0-workdata-replicate-3:> > Failed getlk for faf59566-10f5-4ddd-8b0c-a87bc6a334fb [File descriptor> > in bad state]> > [2024-01-20 07:23:58.562151 +0000] W [MSGID: 114031]> > [client-rpc-fops_v2.c:2561:client4_0_lookup_cbk] 0-workdata-client-11:> > remote operation failed.> > [{path=<gfid:faf59566-10f5-4ddd-8b0c-a87bc6a334fb>},> > {gfid=faf59566-10f5-4ddd-8b0c-a87b> > c6a334fb}, {errno=2}, {error=No such file or directory}]> > [2024-01-20 07:23:58.562296 +0000] W [MSGID: 114061]> > [client-common.c:530:client_pre_flush_v2] 0-workdata-client-11:> > remote_fd is -1. EBADFD [{gfid=faf59566-10f5-4ddd-8b0c-a87bc6a334fb},> > {errno=77}, {error=File descriptor in bad state}]> > [2024-01-20 07:23:58.860552 +0000] W [MSGID: 114061]> > [client-common.c:796:client_pre_lk_v2] 0-workdata-client-8: remote_fd> > is -1. EBADFD [{gfid=60465723-5dc0-4ebe-aced-9f2c12e52642},> > {errno=77}, {error=File descriptor in bad state}]> > [2024-01-20 07:23:58.860608 +0000] E [MSGID: 108028]> > [afr-open.c:361:afr_is_reopen_allowed_cbk] 0-workdata-replicate-2:> > Failed getlk for 60465723-5dc0-4ebe-aced-9f2c12e52642 [File descriptor> > in bad state]> > [2024-01-20 07:23:58.861520 +0000] W [MSGID: 114031]> > [client-rpc-fops_v2.c:2561:client4_0_lookup_cbk] 0-workdata-client-8:> > remote operation failed.> > [{path=<gfid:60465723-5dc0-4ebe-aced-9f2c12e52642>},> > {gfid=60465723-5dc0-4ebe-aced-9f2c1> > 2e52642}, {errno=2}, {error=No such file or directory}]> > [2024-01-20 07:23:58.861640 +0000] W [MSGID: 114061]> > [client-common.c:530:client_pre_flush_v2] 0-workdata-client-8:> > remote_fd is -1. EBADFD [{gfid=60465723-5dc0-4ebe-aced-9f2c12e52642},> > {errno=77}, {error=File descriptor in bad state}]> >> > Not many log entries appear, only a few. Has someone seen error> > messages like these? Setting diagnostics.brick-sys-log-level to DEBUG> > shows way more log entries, uploaded it to:> > https://file.io/spLhlcbMCzr8 - not sure if that helps.> >> >> > Thx,> > Hubert> >> > Am Fr., 19. Jan. 2024 um 16:24 Uhr schrieb Gilberto Ferreira> > <gilberto.nunes32@xxxxxxxxx>:> >> > >> > > gluster volume set testvol diagnostics.brick-log-level WARNING> > > gluster volume set testvol diagnostics.brick-sys-log-level WARNING> > > gluster volume set testvol diagnostics.client-log-level ERROR> > > gluster --log-level=ERROR volume status> > >> > > ---> > > Gilberto Nunes Ferreira> > >> > >> > >> > >> > >> > >> > > Em sex., 19 de jan. de 2024 às 05:49, Hu Bert <revirii@xxxxxxxxxxxxxx> escreveu:> > >>> > >> Hi Strahil,> > >> hm, don't get me wrong, it may sound a bit stupid, but... where do i> > >> set the log level? Using debian...> > >>> > >>> > >> ls /etc/glusterfs/> > >> eventsconfig.json glusterfs-georep-logrotate> > >> gluster-rsyslog-5.8.conf group-db-workload group-gluster-block> > >> group-nl-cache group-virt.example logger.conf.example> > >> glusterd.vol glusterfs-logrotate> > >> gluster-rsyslog-7.2.conf group-distributed-virt group-metadata-cache> > >> group-samba gsyncd.conf thin-arbiter.vol> > >>> > >> checked: /etc/glusterfs/logger.conf.example> > >>> > >> # To enable enhanced logging capabilities,> > >> #> > >> # 1. rename this file to /etc/glusterfs/logger.conf> > >> #> > >> # 2. rename /etc/rsyslog.d/gluster.conf.example to> > >> # /etc/rsyslog.d/gluster.conf> > >> #> > >> # This change requires restart of all gluster services/volumes and> > >> # rsyslog.> > >>> > >> tried (to test): /etc/glusterfs/logger.conf with " LOG_LEVEL='WARNING' "> > >>> > >> restart glusterd on that node, but this doesn't work, log-level stays> > >> on INFO. /etc/rsyslog.d/gluster.conf.example does not exist. Probably> > >> /etc/rsyslog.conf on debian. But first it would be better to know> > >> where to set the log-level for glusterd.> > >>> > >> Depending on how much the DEBUG log-level talks ;-) i could assign up> > >> to 100G to /var> > >>> > >>> > >> Thx & best regards,> > >> Hubert> > >>> > >>> > >> Am Do., 18. Jan. 2024 um 22:58 Uhr schrieb Strahil Nikolov> > >> <hunter86_bg@xxxxxxxxx>:> > >> >> > >> > Are you able to set the logs to debug level ?> > >> > It might provide a clue what it is going on.> > >> >> > >> > Best Regards,> > >> > Strahil Nikolov> > >> >> > >> > On Thu, Jan 18, 2024 at 13:08, Diego Zuccato> > >> > <diego.zuccato@xxxxxxxx> wrote:> > >> > That's the same kind of errors I keep seeing on my 2 clusters,> > >> > regenerated some months ago. Seems a pseudo-split-brain that should be> > >> > impossible on a replica 3 cluster but keeps happening.> > >> > Sadly going to ditch Gluster ASAP.> > >> >> > >> > Diego> > >> >> > >> > Il 18/01/2024 07:11, Hu Bert ha scritto:> > >> > > Good morning,> > >> > > heal still not running. Pending heals now sum up to 60K per brick.> > >> > > Heal was starting instantly e.g. after server reboot with version> > >> > > 10.4, but doesn't with version 11. What could be wrong?> > >> > >> > >> > > I only see these errors on one of the "good" servers in glustershd.log:> > >> > >> > >> > > [2024-01-18 06:08:57.328480 +0000] W [MSGID: 114031]> > >> > > [client-rpc-fops_v2.c:2561:client4_0_lookup_cbk] 0-workdata-client-0:> > >> > > remote operation failed.> > >> > > [{path=<gfid:cb39a1e4-2a4c-4727-861d-3ed9ef00681b>},> > >> > > {gfid=cb39a1e4-2a4c-4727-861d-3ed9e> > >> > > f00681b}, {errno=2}, {error=No such file or directory}]> > >> > > [2024-01-18 06:08:57.594051 +0000] W [MSGID: 114031]> > >> > > [client-rpc-fops_v2.c:2561:client4_0_lookup_cbk] 0-workdata-client-1:> > >> > > remote operation failed.> > >> > > [{path=<gfid:3e9b178c-ae1f-4d85-ae47-fc539d94dd11>},> > >> > > {gfid=3e9b178c-ae1f-4d85-ae47-fc539> > >> > > d94dd11}, {errno=2}, {error=No such file or directory}]> > >> > >> > >> > > About 7K today. Any ideas? Someone?> > >> > >> > >> > >> > >> > > Best regards,> > >> > > Hubert> > >> > >> > >> > > Am Mi., 17. Jan. 2024 um 11:24 Uhr schrieb Hu Bert <revirii@xxxxxxxxxxxxxx>:> > >> > >>> > >> > >> ok, finally managed to get all servers, volumes etc runnung, but took> > >> > >> a couple of restarts, cksum checks etc.> > >> > >>> > >> > >> One problem: a volume doesn't heal automatically or doesn't heal at all.> > >> > >>> > >> > >> gluster volume status> > >> > >> Status of volume: workdata> > >> > >> Gluster process TCP Port RDMA Port Online Pid> > >> > >> ------------------------------------------------------------------------------> > >> > >> Brick glusterpub1:/gluster/md3/workdata 58832 0 Y 3436> > >> > >> Brick glusterpub2:/gluster/md3/workdata 59315 0 Y 1526> > >> > >> Brick glusterpub3:/gluster/md3/workdata 56917 0 Y 1952> > >> > >> Brick glusterpub1:/gluster/md4/workdata 59688 0 Y 3755> > >> > >> Brick glusterpub2:/gluster/md4/workdata 60271 0 Y 2271> > >> > >> Brick glusterpub3:/gluster/md4/workdata 49461 0 Y 2399> > >> > >> Brick glusterpub1:/gluster/md5/workdata 54651 0 Y 4208> > >> > >> Brick glusterpub2:/gluster/md5/workdata 49685 0 Y 2751> > >> > >> Brick glusterpub3:/gluster/md5/workdata 59202 0 Y 2803> > >> > >> Brick glusterpub1:/gluster/md6/workdata 55829 0 Y 4583> > >> > >> Brick glusterpub2:/gluster/md6/workdata 50455 0 Y 3296> > >> > >> Brick glusterpub3:/gluster/md6/workdata 50262 0 Y 3237> > >> > >> Brick glusterpub1:/gluster/md7/workdata 52238 0 Y 5014> > >> > >> Brick glusterpub2:/gluster/md7/workdata 52474 0 Y 3673> > >> > >> Brick glusterpub3:/gluster/md7/workdata 57966 0 Y 3653> > >> > >> Self-heal Daemon on localhost N/A N/A Y 4141> > >> > >> Self-heal Daemon on glusterpub1 N/A N/A Y 5570> > >> > >> Self-heal Daemon on glusterpub2 N/A N/A Y 4139> > >> > >>> > >> > >> "gluster volume heal workdata info" lists a lot of files per brick.> > >> > >> "gluster volume heal workdata statistics heal-count" shows thousands> > >> > >> of files per brick.> > >> > >> "gluster volume heal workdata enable" has no effect.> > >> > >>> > >> > >> gluster volume heal workdata full> > >> > >> Launching heal operation to perform full self heal on volume workdata> > >> > >> has been successful> > >> > >> Use heal info commands to check status.> > >> > >>> > >> > >> -> not doing anything at all. And nothing happening on the 2 "good"> > >> > >> servers in e.g. glustershd.log. Heal was working as expected on> > >> > >> version 10.4, but here... silence. Someone has an idea?> > >> > >>> > >> > >>> > >> > >> Best regards,> > >> > >> Hubert> > >> > >>> > >> > >> Am Di., 16. Jan. 2024 um 13:44 Uhr schrieb Gilberto Ferreira> > >> > >> <gilberto.nunes32@xxxxxxxxx>:> > >> > >>>> > >> > >>> Ah! Indeed! You need to perform an upgrade in the clients as well.> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>>> > >> > >>> Em ter., 16 de jan. de 2024 às 03:12, Hu Bert <revirii@xxxxxxxxxxxxxx> escreveu:> > >> > >>>>> > >> > >>>> morning to those still reading :-)> > >> > >>>>> > >> > >>>> i found this: https://docs.gluster.org/en/main/Troubleshooting/troubleshooting-glusterd/#common-issues-and-how-to-resolve-them> > >> > >>>>> > >> > >>>> there's a paragraph about "peer rejected" with the same error message,> > >> > >>>> telling me: "Update the cluster.op-version" - i had only updated the> > >> > >>>> server nodes, but not the clients. So upgrading the cluster.op-version> > >> > >>>> wasn't possible at this time. So... upgrading the clients to version> > >> > >>>> 11.1 and then the op-version should solve the problem?> > >> > >>>>> > >> > >>>>> > >> > >>>> Thx,> > >> > >>>> Hubert> > >> > >>>>> > >> > >>>> Am Mo., 15. Jan. 2024 um 09:16 Uhr schrieb Hu Bert <revirii@xxxxxxxxxxxxxx>:> > >> > >>>>>> > >> > >>>>> Hi,> > >> > >>>>> just upgraded some gluster servers from version 10.4 to version 11.1.> > >> > >>>>> Debian bullseye & bookworm. When only installing the packages: good,> > >> > >>>>> servers, volumes etc. work as expected.> > >> > >>>>>> > >> > >>>>> But one needs to test if the systems work after a daemon and/or server> > >> > >>>>> restart. Well, did a reboot, and after that the rebooted/restarted> > >> > >>>>> system is "out". Log message from working node:> > >> > >>>>>> > >> > >>>>> [2024-01-15 08:02:21.585694 +0000] I [MSGID: 106163]> > >> > >>>>> [glusterd-handshake.c:1501:__glusterd_mgmt_hndsk_versions_ack]> > >> > >>>>> 0-management: using the op-version 100000> > >> > >>>>> [2024-01-15 08:02:21.589601 +0000] I [MSGID: 106490]> > >> > >>>>> [glusterd-handler.c:2546:__glusterd_handle_incoming_friend_req]> > >> > >>>>> 0-glusterd: Received probe from uuid:> > >> > >>>>> b71401c3-512a-47cb-ac18-473c4ba7776e> > >> > >>>>> [2024-01-15 08:02:23.608349 +0000] E [MSGID: 106010]> > >> > >>>>> [glusterd-utils.c:3824:glusterd_compare_friend_volume] 0-management:> > >> > >>>>> Version of Cksums sourceimages differ. local cksum = 2204642525,> > >> > >>>>> remote cksum = 1931483801 on peer gluster190> > >> > >>>>> [2024-01-15 08:02:23.608584 +0000] I [MSGID: 106493]> > >> > >>>>> [glusterd-handler.c:3819:glusterd_xfer_friend_add_resp] 0-glusterd:> > >> > >>>>> Responded to gluster190 (0), ret: 0, op_ret: -1> > >> > >>>>> [2024-01-15 08:02:23.613553 +0000] I [MSGID: 106493]> > >> > >>>>> [glusterd-rpc-ops.c:467:__glusterd_friend_add_cbk] 0-glusterd:> > >> > >>>>> Received RJT from uuid: b71401c3-512a-47cb-ac18-473c4ba7776e, host:> > >> > >>>>> gluster190, port: 0> > >> > >>>>>> > >> > >>>>> peer status from rebooted node:> > >> > >>>>>> > >> > >>>>> root@gluster190 ~ # gluster peer status> > >> > >>>>> Number of Peers: 2> > >> > >>>>>> > >> > >>>>> Hostname: gluster189> > >> > >>>>> Uuid: 50dc8288-aa49-4ea8-9c6c-9a9a926c67a7> > >> > >>>>> State: Peer Rejected (Connected)> > >> > >>>>>> > >> > >>>>> Hostname: gluster188> > >> > >>>>> Uuid: e15a33fe-e2f7-47cf-ac53-a3b34136555d> > >> > >>>>> State: Peer Rejected (Connected)> > >> > >>>>>> > >> > >>>>> So the rebooted gluster190 is not accepted anymore. And thus does not> > >> > >>>>> appear in "gluster volume status". I then followed this guide:> > >> > >>>>>> > >> > >>>>> https://gluster-documentations.readthedocs.io/en/latest/Administrator%20Guide/Resolving%20Peer%20Rejected/> > >> > >>>>>> > >> > >>>>> Remove everything under /var/lib/glusterd/ (except glusterd.info) and> > >> > >>>>> restart glusterd service etc. Data get copied from other nodes,> > >> > >>>>> 'gluster peer status' is ok again - but the volume info is missing,> > >> > >>>>> /var/lib/glusterd/vols is empty. When syncing this dir from another> > >> > >>>>> node, the volume then is available again, heals start etc.> > >> > >>>>>> > >> > >>>>> Well, and just to be sure that everything's working as it should,> > >> > >>>>> rebooted that node again - the rebooted node is kicked out again, and> > >> > >>>>> you have to restart bringing it back again.> > >> > >>>>>> > >> > >>>>> Sry, but did i miss anything? Has someone experienced similar> > >> > >>>>> problems? I'll probably downgrade to 10.4 again, that version was> > >> > >>>>> working...> > >> > >>>>>> > >> > >>>>>> > >> > >>>>> Thx,> > >> > >>>>> Hubert> > >> > >>>> ________> > >> > >>>>> > >> > >>>>> > >> > >>>>> > >> > >>>> Community Meeting Calendar:> > >> > >>>>> > >> > >>>> Schedule -> > >> > >>>> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC> > >> > >>>> Bridge: https://meet.google.com/cpu-eiue-hvk> > >> > >>>> Gluster-users mailing list> > >> > >>>> Gluster-users@xxxxxxxxxxx> > >> > >>>> https://lists.gluster.org/mailman/listinfo/gluster-users> > >> > > ________> > >> > >> > >> > >> > >> > >> > >> > > Community Meeting Calendar:> > >> > >> > >> > > Schedule -> > >> > > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC> > >> > > Bridge: https://meet.google.com/cpu-eiue-hvk> > >> > > Gluster-users mailing list> > >> > > Gluster-users@xxxxxxxxxxx> > >> >> > >> > --> > >> > Diego Zuccato> > >> > DIFA - Dip. di Fisica e Astronomia> > >> > Servizi Informatici> > >> > Alma Mater Studiorum - Università di Bologna> > >> > V.le Berti-Pichat 6/2 - 40127 Bologna - Italy> > >> > tel.: +39 051 20 95786> > >> >> > >> > ________> > >> >> > >> >> > >> >> > >> > Community Meeting Calendar:> > >> >> > >> > Schedule -> > >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC> > >> > Bridge: https://meet.google.com/cpu-eiue-hvk> > >> > Gluster-users mailing list> > >> > Gluster-users@xxxxxxxxxxx> > >> >> > >> > ________> > >> >> > >> >> > >> >> > >> > Community Meeting Calendar:> > >> >> > >> > Schedule -> > >> > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC> > >> > Bridge: https://meet.google.com/cpu-eiue-hvk> > >> > Gluster-users mailing list> > >> > Gluster-users@xxxxxxxxxxx> > >> ________> > >>> > >>> > >>> > >> Community Meeting Calendar:> > >>> > >> Schedule -> > >> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC> > >> Bridge: https://meet.google.com/cpu-eiue-hvk> > >> Gluster-users mailing list> > >> Gluster-users@xxxxxxxxxxx
________ Community Meeting Calendar: Schedule - Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC Bridge: https://meet.google.com/cpu-eiue-hvk Gluster-users mailing list Gluster-users@xxxxxxxxxxx https://lists.gluster.org/mailman/listinfo/gluster-users
