Re: Gluster 11.0 upgrade

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi again,
There is something going on when gluster starts.
I fired up my virt machines this morning to do some more
testing and one of the nodes did not come online
in the cluster.
Looking at that node I found that only glusterd and glusterfs
has started.
After:
systemctl stop glusterd
killall glusterd glusterfs glusterfsd
systemctl start glusterd

Gluster started correct and glusterd, glusterfs and glusterfsd
all started and the node was online in the cluster.

I just wanted to let you know if this might help.

Regards
Marcus


On Mon, Feb 20, 2023 at 02:52:52PM +0100, Marcus Pedersén wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
>
> Hi again Xavi,
>
> I did some more testing on my virt machines
> with same setup:
> Number of Bricks: 1 x (2 + 1) = 3
> If I do it the same way, I upgrade the arbiter first,
> I get the same behavior that the bricks do not start
> and the other nodes does not "see" the upgraded node.
> If I upgrade one of the other nodes (non arbiter) and restart
> glusterd on both the arbiter and the other the arbiter starts
> the bricks and connects with the other upgraded node as expected.
> If I upgrade the last node (non arbiter) it will fail to start
> the bricks, same behaviour as the arbiter at first.
> If I then copy the /var/lib/gluster/vols/<myvol> from the
> upgraded (non arbiter) node to the other node that does not start the bricks
> and replace /var/lib/gluster/vols/<myvol> with the copied directory
> and restarts glusterd it works nicely after that.
> Everything then works the way it should.
>
> So the question is if the arbiter is treated in some other way
> compared to the other nodes?
>
> Some type of config is happening at the start of the glusterd that
> makes the node fail?
>
> Do I dare to continue to upgrade my real cluster with the above described way?
>
> Thanks!
>
> Regards
> Marcus
>
>
>
> On Mon, Feb 20, 2023 at 01:42:47PM +0100, Marcus Pedersén wrote:
> > I made a recusive diff on the upgraded arbiter.
> >
> > /var/lib/glusterd/vols/gds-common is the upgraded aribiter
> > /home/marcus/gds-common is one of the other nodes still on gluster 10
> >
> > diff -r /var/lib/glusterd/vols/gds-common/bricks/urd-gds-030:-urd-gds-gds-common /home/marcus/gds-common/bricks/urd-gds-030:-urd-gds-gds-common
> > 5c5
> > < listen-port=60419
> > ---
> > > listen-port=0
> > 11c11
> > < brick-fsid=14764358630653534655
> > ---
> > > brick-fsid=0
> > diff -r /var/lib/glusterd/vols/gds-common/bricks/urd-gds-031:-urd-gds-gds-common /home/marcus/gds-common/bricks/urd-gds-031:-urd-gds-gds-common
> > 5c5
> > < listen-port=0
> > ---
> > > listen-port=60891
> > 11c11
> > < brick-fsid=0
> > ---
> > > brick-fsid=1088380223149770683
> > diff -r /var/lib/glusterd/vols/gds-common/cksum /home/marcus/gds-common/cksum
> > 1c1
> > < info=3948700922
> > ---
> > > info=458813151
> > diff -r /var/lib/glusterd/vols/gds-common/gds-common.urd-gds-030.urd-gds-gds-common.vol /home/marcus/gds-common/gds-common.urd-gds-030.urd-gds-gds-common.vol
> > 3c3
> > <     option shared-brick-count 1
> > ---
> > >     option shared-brick-count 0
> > diff -r /var/lib/glusterd/vols/gds-common/gds-common.urd-gds-031.urd-gds-gds-common.vol /home/marcus/gds-common/gds-common.urd-gds-031.urd-gds-gds-common.vol
> > 3c3
> > <     option shared-brick-count 0
> > ---
> > >     option shared-brick-count 1
> > diff -r /var/lib/glusterd/vols/gds-common/info /home/marcus/gds-common/info
> > 23a24
> > > nfs.disable=on
> >
> >
> > I setup 3 virt machines  and configured them with gluster 10 (arbiter 1).
> > After that I upgraded to 11 and the first 2 nodes was fine but on the third
> > node I got the same behaviour: the brick never started.
> >
> > Thanks for the help!
> >
> > Regards
> > Marcus
> >
> >
> > On Mon, Feb 20, 2023 at 12:30:37PM +0100, Xavi Hernandez wrote:
> > > CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> > >
> > >
> > > Hi Marcus,
> > >
> > > On Mon, Feb 20, 2023 at 8:50 AM Marcus Pedersén <marcus.pedersen@xxxxxx<mailto:marcus.pedersen@xxxxxx>> wrote:
> > > Hi Xavi,
> > > I stopped glusterd and killall glusterd glusterfs glusterfsd
> > > and started glusterd again.
> > >
> > > The only log that is not empty is glusterd.log, I attach the log
> > > from the restart time. The brick log, glustershd.log and glfsheal-gds-common.log is empty.
> > >
> > > This are the errors in the log:
> > > [2023-02-20 07:23:46.235263 +0000] E [MSGID: 106061] [glusterd.c:597:glusterd_crt_georep_folders] 0-glusterd: Dict get failed [{Key=log-group}, {errno=2}, {error=No such file or directory}]
> > > [2023-02-20 07:23:47.359917 +0000] E [MSGID: 106010] [glusterd-utils.c:3542:glusterd_compare_friend_volume] 0-management: Version of Cksums gds-common differ. local cksum = 3017846959, remote cksum = 2065453698 on peer urd-gds-031
> > > [2023-02-20 07:23:47.438052 +0000] E [MSGID: 106010] [glusterd-utils.c:3542:glusterd_compare_friend_volume] 0-management: Version of Cksums gds-common differ. local cksum = 3017846959, remote cksum = 2065453698 on peer urd-gds-032
> > >
> > > Geo replication is not setup so I guess there is nothing strange that there is an error regarding georep.
> > > The checksum error seems natural to be there as the other nodes are still on version 10.
> > >
> > > No. The configurations should be identical.
> > >
> > > Can you try to compare volume definitions in /var/lib/glusterd/vols/gds-common between the upgraded server and one of the old ones ?
> > >
> > > Regards,
> > >
> > > Xavi
> > >
> > >
> > > My previous exprience with upgrades is that the local bricks starts and
> > > gluster is up and running. No connection with the other nodes until they are upgraded as well.
> > >
> > >
> > > gluster peer status, gives the output:
> > > Number of Peers: 2
> > >
> > > Hostname: urd-gds-032
> > > Uuid: e6f96ad2-0fea-4d80-bd42-8236dd0f8439
> > > State: Peer Rejected (Connected)
> > >
> > > Hostname: urd-gds-031
> > > Uuid: 2d7c0ad7-dfcf-4eaf-9210-f879c7b406bf
> > > State: Peer Rejected (Connected)
> > >
> > > I suppose and guess that this is due to that the arbiter is version 11
> > > and the other 2 nodes are version 10.
> > >
> > > Please let me know if I can provide any other information
> > > to try to solve this issue.
> > >
> > > Many thanks!
> > > Marcus
> > >
> > >
> > > On Mon, Feb 20, 2023 at 07:29:20AM +0100, Xavi Hernandez wrote:
> > > > CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> > > >
> > > >
> > > > Hi Marcus,
> > > >
> > > > these errors shouldn't prevent the bricks from starting. Isn't there any other error or warning ?
> > > >
> > > > Regards,
> > > >
> > > > Xavi
> > > >
> > > > On Fri, Feb 17, 2023 at 3:06 PM Marcus Pedersén <marcus.pedersen@xxxxxx<mailto:marcus.pedersen@xxxxxx><mailto:marcus.pedersen@xxxxxx<mailto:marcus.pedersen@xxxxxx>>> wrote:
> > > > Hi all,
> > > > I started an upgrade to gluster 11.0 from 10.3 on one of my clusters.
> > > > OS: Debian bullseye
> > > >
> > > > Volume Name: gds-common
> > > > Type: Replicate
> > > > Volume ID: 42c9fa00-2d57-4a58-b5ae-c98c349cfcb6
> > > > Status: Started
> > > > Snapshot Count: 0
> > > > Number of Bricks: 1 x (2 + 1) = 3
> > > > Transport-type: tcp
> > > > Bricks:
> > > > Brick1: urd-gds-031:/urd-gds/gds-common
> > > > Brick2: urd-gds-032:/urd-gds/gds-common
> > > > Brick3: urd-gds-030:/urd-gds/gds-common (arbiter)
> > > > Options Reconfigured:
> > > > cluster.granular-entry-heal: on
> > > > storage.fips-mode-rchecksum: on
> > > > transport.address-family: inet
> > > > nfs.disable: on
> > > > performance.client-io-threads: off
> > > >
> > > > I started with the arbiter node, stopped all of gluster
> > > > upgraded to 11.0 and all went fine.
> > > > After upgrade I was able to see the other nodes and
> > > > all nodes were connected.
> > > > After a reboot on the arbiter nothing works the way it should.
> > > > Both brick1 and brick2 has connection but no connection
> > > > with the arbiter.
> > > > On the arbiter glusterd has started and is listening on port 24007,
> > > > the problem seems to be glusterfsd, it never starts!
> > > >
> > > > If I run: gluster volume status
> > > >
> > > > Status of volume: gds-common
> > > > Gluster process                             TCP Port  RDMA Port  Online  Pid
> > > > ------------------------------------------------------------------------------
> > > > Brick urd-gds-030:/urd-gds/gds-common       N/A       N/A        N       N/A
> > > > Self-heal Daemon on localhost               N/A       N/A        N       N/A
> > > >
> > > > Task Status of Volume gds-common
> > > > ------------------------------------------------------------------------------
> > > > There are no active volume tasks
> > > >
> > > >
> > > > In glusterd.log I find the following errors (arbiter node):
> > > > [2023-02-17 12:30:40.519585 +0000] E [gf-io-uring.c:404:gf_io_uring_setup] 0-io: [MSGID:101240] Function call failed <{function=io_uring_setup()}, {error=12 (Cannot allocate memory)}>
> > > > [2023-02-17 12:30:40.678031 +0000] E [MSGID: 106061] [glusterd.c:597:glusterd_crt_georep_folders] 0-glusterd: Dict get failed [{Key=log-group}, {errno=2}, {error=No such file or directory}]
> > > >
> > > > In brick/urd-gds-gds-common.log I find the following error:
> > > > [2023-02-17 12:30:43.550753 +0000] E [gf-io-uring.c:404:gf_io_uring_setup] 0-io: [MSGID:101240] Function call failed <{function=io_uring_setup()}, {error=12 (Cannot allocate memory)}>
> > > >
> > > > I enclose both logfiles.
> > > >
> > > > How do I resolve this issue??
> > > >
> > > > Many thanks in advance!!
> > > >
> > > > Marcus
> > > > ---
> > > > När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> > > > E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
> > > > ________
> > > >
> > > >
> > > >
> > > > Community Meeting Calendar:
> > > >
> > > > Schedule -
> > > > Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> > > > Bridge: https://meet.google.com/cpu-eiue-hvk
> > > > Gluster-users mailing list
> > > > Gluster-users@xxxxxxxxxxx<mailto:Gluster-users@xxxxxxxxxxx><mailto:Gluster-users@xxxxxxxxxxx<mailto:Gluster-users@xxxxxxxxxxx>>
> > > > https://lists.gluster.org/mailman/listinfo/gluster-users
> > > ---
> > > När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> > > E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
> ---
> När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
> E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
> ________
>
>
>
> Community Meeting Calendar:
>
> Schedule -
> Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
> Bridge: https://meet.google.com/cpu-eiue-hvk
> Gluster-users mailing list
> Gluster-users@xxxxxxxxxxx
> https://lists.gluster.org/mailman/listinfo/gluster-users

--
**************************************************
* Marcus Pedersén                                *
* System administrator                           *
**************************************************
* Interbull Centre                               *
* ================                               *
* Department of Animal Breeding & Genetics — SLU *
* Box 7023, SE-750 07                            *
* Uppsala, Sweden                                *
**************************************************
* Visiting address:                              *
* Room 55614, Ulls väg 26, Ultuna                *
* Uppsala                                        *
* Sweden                                         *
*                                                *
* Tel: +46-(0)18-67 1962                         *
*                                                *
**************************************************
*     ISO 9001 Bureau Veritas No SE004561-1      *
**************************************************
---
När du skickar e-post till SLU så innebär detta att SLU behandlar dina personuppgifter. För att läsa mer om hur detta går till, klicka här <https://www.slu.se/om-slu/kontakta-slu/personuppgifter/>
E-mailing SLU will result in SLU processing your personal data. For more information on how this is done, click here <https://www.slu.se/en/about-slu/contact-slu/personal-data/>
________



Community Meeting Calendar:

Schedule -
Every 2nd and 4th Tuesday at 14:30 IST / 09:00 UTC
Bridge: https://meet.google.com/cpu-eiue-hvk
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-users




[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux