U-Boot V2 Development (Barebox)

• Thread Index

• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: Fix dependencies for firmware in PBL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/3] video/ssd1307fb: fix NULL pointer dereference in probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] video/ssd1307fb: make reset GPIO optional
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] video/ssd1307fb: drop unneeded regulator NULL checks
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: Add missing #size/address-cells properties
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] arm: dts: Fix node names
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] arm: vf610-zii-scu4-aib: Remove non effective properties
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] reset: add stub for device_reset when CONFIG_RESET_CONTROLLER=n
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] USB fastboot onto eMMC: make 30% faster!
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] firmware: Fix dependencies for firmware in PBL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: designware: eqos: remove left-over PHY quirk work around
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] Documentation: boards: stm32mp: document eMMC partition layout
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM64: add support for booting a FIT image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] fastboot net: workaround for receiving before sending
  • From: Daniel Glöckner <dg@xxxxxxxxx>
• [PATCH 1/3] fastboot: split generic code from USB gadget
  • From: Daniel Glöckner <dg@xxxxxxxxx>
• [PATCH 2/3] fastboot net: implement fastboot over UDP
  • From: Daniel Glöckner <dg@xxxxxxxxx>
• [PATCH 0/3] Support for fastboot over UDP
  • From: Daniel Glöckner <dg@xxxxxxxxx>
• Re: [PATCH] fixup! USB: MUSB: defer driver probes where necessary
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! USB: MUSB: defer driver probes where necessary
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] fixup! usb: gadget: fastboot: call discard_range for sparse files as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] usb: host: ehci: distinguish DMA addresses
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH 0/2] USB fastboot onto eMMC: make 30% faster!
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] Revert "block: Adjust cache sizes"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: fastboot: call discard_range for sparse files as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM64: add support for booting a FIT image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH v2] Documentation: boards: stm32mp: document eMMC partition layout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] Documentation: boards: stm32mp: document eMMC partition layout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: phycore-imx6: change mtd-partition names for compatibility with kernel
  • From: Yunus Bas <y.bas@xxxxxxxxx>
• RE: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: Barebox as first and second stage bootloader
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH 1/2] net: designware: eqos: remove left-over PHY quirk work around
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] net: designware: eqos: mimic Linux gmac4 mdio_{read, write}
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Barebox as first and second stage bootloader
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• [PATCH] fixup! USB: MUSB: defer driver probes where necessary
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy()
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] USB: MUSB: defer driver probes where necessary
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: Bareox mv88e6xxx switch driver not working properly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] USB: MUSB: defer driver probes where necessary
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] USB: MUSB: PHY: scrap singleton am335x_get_usb_phy()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
• [PATCH 3/3] clk: print more consistent clock states
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] clk: initially enable critical clocks
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] clk: Do not let the enable count of critical clocks go below 1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] phy: usb: add support for STM32 usbphyc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] images: i.MX: fix marsboard image file name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: stm32mp: dk2: delete unused includes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: ath79: add support for OpenEmbed SOM9331 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] gadget: f_fastboot: New Kconfig option USB_GADGET_FASTBOOT_CMD_OEM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: rename "struct usb_configuration" to "struct usb_config"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] of: add missing newline to pr_warn
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] of: demote symbol copy error from warning to info
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: baltos: use compressed DTB images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Bareox mv88e6xxx switch driver not working properly
  • From: 曹煜 <cao88yu@xxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• RE: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: baltos: use compressed DTB images
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: stm32mp: add aliases for mmc1 and mmc2
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] images: i.MX: fix marsboard image file name
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/2] ARM: stm32mp: dk2: delete unused includes
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] MIPS: ath79: add support for OpenEmbed SOM9331 board
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: imx-usb-loader on imx8mq/mm
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] gadget: f_fastboot: New Kconfig option USB_GADGET_FASTBOOT_CMD_OEM
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] usb: rename "struct usb_configuration" to "struct usb_config"
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 3/6] phy: populate existing ->pwr member with phy-supply
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/6] phy: port over Linux stm32 usbphyc driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/6] phy: remove unused init_data parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/6] phy: introduce phy_get_by_index
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/6] regulator: port over Linux stm32 PWR regulator driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/6] phy: usb: add support for STM32 usbphyc
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/6] regulator: import Linux regulator_bulk API
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] reset: add stub for device_reset when CONFIG_RESET_CONTROLLER=n
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] of: add missing newline to pr_warn
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/2] of: demote symbol copy error from warning to info
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [RAUC] Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Enrico Jörns <ejo@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: baltos: use compressed DTB images
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: i.MX: external NAND boot: Leave icache disabled
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! commands: boot: create boot entries on demand
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: i.MX: external NAND boot: Leave icache disabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] reset_source: introduce reset_source_xlate to translate specific type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] ARM: stm32mp: fix Ethernet after dts/ update
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] gpiolib: use correct format specifier for ptrdiff_t
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: baltos: use compressed DTB images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: i.MX: external NAND boot: Leave icache disabled
  • From: Oleksij Rempel <fishor@xxxxxxx>
• [PATCH 7/8] Remove unused __BARE_INIT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: Use function specific sections in assembly functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] ARM: arm64: remove bare_init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] ARM: remove unnecessary __bare_init attributes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] Put bare_init functions in separate sections
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] nios2: remove bare_init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] mips: remove bare_init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] x86: remove bare_init
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] ARM: i.MX: external NAND boot: remove unnecessary arguments from imx*_nand_load_image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] ARM: i.MX: external NAND boot: Fix passing boarddata
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] ARM: i.MX Phytec phycore i.MX27: replace __naked with noinline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/6] ARM: i.MX: external NAND boot: Leave icache disabled
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] ARM: i.MX Phytec phycard i.MX27: get fdt in common init function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] ARM: i.MX Phytec phycard i.MX27: replace __naked with noinline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/6] i.MX: Fix external NAND boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: i.MX1: make locally used function static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: scb9328: Add missing machine protection
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] regmap: add support for regmap_init_mmio_clk
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/6] net: designware: eqos: stm32: drop no longer needed syscfg-clk
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/6] mfd: syscon: clock peripheral if specified in device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/6] mfd: syscon: use regmap-mmio as backend
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: stm32mp: fix Ethernet after dts/ update
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/6] ARM: dts: stm32mp: align barebox dtsi name with upstream
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/6] regmap: make internal.h a self-contained header
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] scripts: define ALIGN(x) in scripts' <linux/kernel.h>
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] gpiolib: use correct format specifier for ptrdiff_t
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] scripts: imd: remove duplicate macro definitions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: Private: Re: [yocto] #yocto update the kernel with a rauc bundle
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: musb is broken in master
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• musb is broken in master
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] arm: baltos: use compressed DTB images
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 16/42] USB: gadget: fsl_udc: move register definitions to header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/42] ARM: i.MX8M: Add iomux header for i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 32/42] iomux: Add i.MX8MM support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/42] ARM: i.MX8M: rename functions to be i.MX8M specific
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 35/42] scripts: imx-usb-loader: Add i.MX8MM support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 33/42] mfd: Add Rohm bd71837 header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 41/42] ARM: i.MX: Add i.MX8MM EVK board support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 39/42] ARM: i.MX8M: Add i.MX8MM support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 26/42] ARM: i.MX: Add SoC namespace to imx7/8m CCM defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 42/42] ARM: i.MX: update imx_v8_defconfig for i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 21/42] mci: imx-esdhc: Add i.MX8mm support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 37/42] ARM: i.MX8M: Add DDR controller support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/42] ARM: i.MX8M: Add ARCH_IMX8M symbol
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/42] ARM: i.MX8M: Detect serial downloader mode correctly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 30/42] ARM: i.MX7: Add and use function for early UART clock setup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 40/42] scripts: imx-image: Add i.MX8MM support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 20/42] serial: imx: Add imx8mm compatible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 29/42] ARM: i.MX8M: Add some lowlevel clock functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 36/42] ARM: i.MX8MQ boards: Add missing includes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 31/42] ARM: i.MX8M: Add and use function for early UART clock setup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 27/42] Add some CCM defines for i.MX8M
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 28/42] ARM: i.MX8M: rename imx8-ccm-regs.h to imx8m-ccm-regs.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 23/42] clk: imx: Add pll14xx support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 34/42] scripts: imx-usb-loader: Add 2nd stage loading support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 22/42] I2C: i.MX: Add early i2c support for i.MX8M
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 38/42] ARM: i.MX8M: Add TF-A loading support for i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/42] HAB: i.MX8M: rename imx8_* functions to imx8m_*
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 19/42] usb: imx: Add i.MX8mm support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/42] ARM: i.MX8M: rename imx8_* bootsource functions to imx8mq_*
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/42] ARM: i.MX: esdctl: rename functions to imx8m_*
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/42] ARM: i.MX8M: rename i.MX8M specific function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 25/42] clk: imx: Add imx8mm clk driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 24/42] clk: imx: Add imx8m_clk_composite_critical
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/42] ARM: i.MX8M: Use imx8mq.c for other i.MX8M as well
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/42] usb: gadget: fsl_udc: Add PBL image loading support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 18/42] usb: gadget: fsl_udc: Fix warnings on 64bit compilation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/42] Add i.MX8M support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/42] mci: imx-esdhc-pbl: Add instance 2 for i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/42] ARM: i.MX8M: Add imx8mm-regs.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/42] ARM: i.MX8M: add and use imx8mq_setup_pad()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/42] ARM: i.MX: Drop iomux argument from mx7_setup_pad()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/42] ARM: i.MX8: Move iomux header to make space for i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/42] ARM: i.MX8M: Add base addresses common to i.MX8M
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2020.02.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] SPDX license tags and (L)GPL boilerplate cleanup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] fs: Introduce discard_range()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] cdev: Add discard_range hook
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] copy_file: call discard_range on destination file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] block: Implement discard_range
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] i2c_probe command: Use kstrtoint
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! commands: boot: create boot entries on demand
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: ns16550_pci: fix possible read of uninitialized variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 5/7] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] include: add SPDX GPL-2.0-only license tags where applicable
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 7/7] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] include: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] SPDX license tags and (L)GPL boilerplate cleanup
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH v3 4/7] LICENSES: add LGPL-2.1-or-later
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH 2/3] clk-conf.h: Add static inline wrapper for of_clk_set_defaults()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] driver: Call of_clk_set_defaults for each probed device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] clk-conf.h: Add missing re-inclusion protection
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: fsl_udc: remove unnessary argument
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] scripts: imx-usb-loader: download address is always the header address
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] scripts: imx-usb-loader: dladdr is unused, remove it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] scripts: imx-usb-loader: remove unnecessary check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] commands: boot: create boot entries on demand
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] mci: core: populate mci_ios.timing member
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] serial: ns16550_pci: fix possible read of uninitialized variable
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• RE:RE: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
  • From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
• Re: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] mci: imx-esdhc: lower timeout message priority to dev_dbg
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: imx-usb-loader: Accept new header version
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] mci: stm32_sdmmc2: don't ignore reset_control_get errors
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] driver: bail out, don't crash, if drv->name is not set
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clocksource: rename driver for ARMv8 Timer to ARM architected timer
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: stm32mp: dk2: barebox_set_model to shorter name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• AW: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
  • From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
• [PATCH 5/5] i2c: tegra: correct error message
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] watchdog: dw_wdt: remove duplicated error message
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] watchdog: dw_wdt: inform user on missing reset control line
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] net: designware: socfpga: fix possible invalid pointer deref
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] mci: stm32_sdmmc2: don't ignore reset_control_get errors
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] watchdog: dw_wdt: populate driver_d.name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] driver: bail out, don't crash, if drv->name is not set
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] clocksource: rename driver for ARMv8 Timer to ARM architected timer
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] watchdog: f71808e: only print reset reason if one's indicated
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] reset: stm32: migrate restart reason and handler from stm32_iwdg
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] reset_source: migrate from reset_source_name to reset_source_xlate
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] reset_source: introduce reset_source_xlate to translate specific type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: stm32mp: dk2: barebox_set_model to shorter name
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2] fs: jffs2: add initial support for reading jffs2
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! imd: add support for checksum generation/verification
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] PWM: misc fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] hw_random: add support for STM32 RNG
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] doc: bootchooser: Fix barebox-state example
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] sandbox: fix signed integer overflow
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] acpi: include missing header in <acpi.h>
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] fixup! imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
  • From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
• [PATCH 4/8] video: backlight-pwm: remove duplicate assignment to object
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/8] led: pwm: don't test if pointer is smaller than zero
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/8] PWM: pxa: make MMIO writes always little endian
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/8] PWM: pxa: remove unused struct members
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/8] regmap: forward declare structs used in header
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/8] led: pwm: fail if required max-brightness option is missing
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/8] PWM: misc fixes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/8] led: pwm: support active-low property
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/8] PWM: core: constify chip->ops pointer
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! hw_random: add support for STM32 RNG
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] hw_random: add support for STM32 RNG
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] mtd: nand-imx: make sure the just created BBT is used
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] mtd: nand-imx: Create BBT automatically when necessary
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] mtd: nand-imx: do not use blocks reserved for BBT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] fs: jffs2: add initial support for reading jffs2
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: Uefi version with 'bare metal' drivers?
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: Updating barebox from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Updating barebox from Linux
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] doc: bootchooser: Fix barebox-state example
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: state framework, fixed-partitions, eeprom and linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: state framework, fixed-partitions, eeprom and linux
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 0/3] commands/test: some improvements
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• Re: state framework, fixed-partitions, eeprom and linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: state framework, fixed-partitions, eeprom and linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• state framework, fixed-partitions, eeprom and linux
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/3] commands/test: Bail out on incomplete command line options
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] sandbox: hostfile: fix UB-inducing shift
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 1/2] sandbox: fix signed integer overflow
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2 2/3] regulator: pfuze: add support to other architectures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] acpi: include missing header in <acpi.h>
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] RISC-V: unbreak built-in dtb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4] MIPS: don't overlay relocation data with BSS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] mci: stm32_sdmmc2: timeout and bus-width bug fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: fixed: take regulator-boot-on into account
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ubsan: use a big if block in Kconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] commands/test: Bail out on incomplete command line options
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] images: Use separate LDFLAGS for PBL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] RISC-V: unbreak built-in dtb
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 0/6] SPDX license tags and (L)GPL boilerplate cleanup
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
  • From: Roland Hieber <rohieb@xxxxxxxxxxx>
• [PATCH v2 1/3] regulator: pfuze: remove unsued define
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/5] mci: stm32_sdmmc2: don't reset before retrying failed operations
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/4] mci: stm32_sdmmc2: timeout and bus-width bug fixes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] mci: stm32_sdmmc2: compare ios ->bus_width with correct constants
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] mci: core: don't test 4-bit-buswidth support if MMC host lacks capability
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] mci: stm32_sdmmc2: use correct card power cycle sequence
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] mci: stm32_sdmmc2: fix typo in debug string
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: maeling list issue
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• maeling list issue
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4] MIPS: don't overlay relocation data with BSS
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• [PATCH] regulator: fixed: take regulator-boot-on into account
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] ubsan: use a big if block in Kconfig
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3] MIPS: remove .bss to __rel_start overlay
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] MIPS: relocate_code: fix relocation area size
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 3/3] commands/test: Implement -b and -c to test for character and block devices
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] commands/test: Improve option parsing to handle "]" less special
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] commands/test: Bail out on incomplete command line options
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/3] commands/test: some improvements
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Small tweak to get ACPI watchdog working (iTCO)
  • From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
• Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: MIPS: relocation issue
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: MIPS: relocation issue
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• RE: MIPS: relocation issue
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] fixup! ARM: add optee early loading function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: MIPS: relocation issue
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] barebox_banner: switch to pr_notice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v1] MIPS: remove .bss to __rel_start overlay
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] OP-TEE early loading
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• MIPS: relocation issue
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 5/5] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 3/5] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 0/5] OP-TEE early loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 2/5] ARM: import setjmp implementation from U-Boot
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 4/5] ARM: mach-imx: test PL310 write access
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 1/5] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] bootm: Register as bootentry provider
  • From: Christian Eggers <ceggers@xxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 1/4] regulator: pfuze: remove unsued define
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/4] regulator: pfuze: add support to other architectures
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 3/4] regulator: pfuze: add include regmap.h so struct regmap is known
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] images: Use separate LDFLAGS for PBL
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 0/2] gpiolib: minor optimization
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] gadget: f_fastboot: Fix memory leak
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx6: properly check for IPU presence
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] bootm: Register as bootentry provider
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] gpiolib: introduce helper functions working on gpio_info structs
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] gpiolib: minor optimization
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] gpiolib: reorder functions
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [RFC PATCH] bootm: Register as bootentry provider
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot / Using bootchooser
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] state: remove param member from struct state_string
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] bootchooser: Change name of kernel parameter
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH] bootchooser: Change name of kernel parameter
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] bootchooser: Change name of kernel parameter
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] barebox_banner: switch to pr_notice
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] gadget: f_fastboot: Fix memory leak
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] ARM: imx6: properly check for IPU presence
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
  • From: gianluca <gianlucarenzi@xxxxxxxx>
• Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: udc: don't warn on unused gadget
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: udc: don't warn on unused gadget
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: udc: don't warn on unused gadget
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• [PATCH 5/5] parameter: Return NULL instead of ENOSYS if CONFIG_PARAMETER is disabled
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 4/5] globalvar: Allow NULL pointers to be returned by dev_add_param()
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 3/5] state: remove param member from state_uint32, state_enum32, state_mac
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/5] mci: remove param_probe member from struct mci
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 1/5] state: remove param member from struct state_string
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Configuring for secure boot / Using bootchooser
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: "Robert Berger@xxxxxxxxxx" <robert.berger.yocto.user@xxxxxxxxx>
• [RFC PATCH 7/9] usb: dwc2: Add getter for gadget fifo hwparams
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 9/9] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 8/9] usb: dwc2: gadget: Configure fifo size
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 6/9] usb: dwc2: Add structure for gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 5/9] usb: dwc2: Add function to flush a tx fifo
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 4/9] usb: dwc2: Add otg state
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 3/9] usb: Update uses of usb_endpoint_maxp
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 2/9] BACKPORT: usb: ch9: make usb_endpoint_maxp() return only packet size
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 1/9] BACKPORT: usb: Add helper to extract bits 12:11 of wMaxPacketize
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 0/9] usb: Add dwc2 gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 3/7] usb: dwc2: host: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 7/7] usb: dwc2: host: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 5/7] usb: dwc2: host: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 6/7] usb: dwc2: host: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 2/7] usb: dwc2: host: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 4/7] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v3 2/3] imd: add support for checksum generation/verification
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Fix error path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] param: Make enum param_tristate always visible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• [PATCH] Partly revert "globalvar: fix crash if CONFIG_NVVAR is not set"
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH 3/3] globalvar: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/3] usb: otg: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] watchdog: Fix error path
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Configuring for secure boot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] param: Make enum param_tristate always visible
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Configuring for secure boot
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Configuring for secure boot
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Issue CPU instructions to start watchdog?
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] imd: add support for checksum generation/verification
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] commands: bbu: add support for imd checksum
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] imd: replace magicvalue with sizeof(struct)
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH] PCI: layerscape: Allow to share stream_ids per host controller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Issue CPU instructions to start watchdog?
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH v2 5/5] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: add optee early loading function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] user: add documentation for OP-TEE loading
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/4] optee: move optee_verify_header() to common
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: add optee early loading function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: mach-imx: OPTEE PBL configures PL210
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH] lds: Fix alignment of initcall table
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: Cannot get 'wd' to appear
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: Cannot get 'wd' to appear
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Cannot get 'wd' to appear
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: [PATCH] lds: Fix alignment of initcall table
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] lds: Fix alignment of initcall table
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH] fs: jffs2: add initial support for reading jffs2
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Clément Leger <cleger@xxxxxxxxx>
• Re: [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] imx25: drop global over-current setting for USB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: qemu-virt64: convert to assembly entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] Add support for Kalray k1c core
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
• Re: [yocto] #yocto bootchooser: Cannot get state 'state'
  • From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
• [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] k1c: Add processor definitions
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 3/5] k1c: Add support for device tree
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 4/5] clocksource: k1c: Add k1c clocksource support
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH 0/5] Add support for Kalray k1c core
  • From: Clement Leger <cleger@xxxxxxxxx>
• [PATCH] imx25: drop global over-current setting for USB
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: qemu arm vexpress / virt32 support
  • From: Wesley Chow <wes@xxxxxxxxxx>
• Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: qemu arm virt64 hangs
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: qemu-virt64: convert to assembly entry
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: qemu arm vexpress / virt32 support
  • From: Lucas Stach <dev@xxxxxxxxxx>
• qemu arm vexpress / virt32 support
  • From: Wesley Chow <wes@xxxxxxxxxx>
• qemu arm virt64 hangs
  • From: Wesley Chow <wes@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
  • From: Clement Leger <cleger@xxxxxxxxx>
• Re: [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• barebox-2020.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC PATCH 7/7] usb: dwc2: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 1/7] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 6/7] usb: dwc2: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 4/7] usb: dwc2: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 3/7] usb: dwc2: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 2/7] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 5/7] HACK: usb: dwc2: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [RFC PATCH 0/7] usb: dwc2 host driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: ehci: Do not use memset on dma coherent memory
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] serial: cadence: move register definitions into header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] PCI: layerscape: rename variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] PCI: layerscape: Fixup iommu-map properties
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: zynq: zedboard: add PBL console support
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/3] serial: cadence: add lowlevel init and putc functions
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/3] serial: cadence: move register definitions into header file
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: [RFC 3/5] net: e1000: make it work on MIPS
  • From: Lucas Stach <dev@xxxxxxxxxx>
• Re: barebox for iMX8MMini crashes while usb_rescan for USB type A
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• barebox for iMX8MMini crashes while usb_rescan for USB type A
  • From: "Albert, Elmar" <EAlbert@xxxxxxxxxxxxxx>
• Re: [RFC 3/5] net: e1000: make it work on MIPS
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/5] include/soc/fsl: remove unused function prototypes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] images: gitignore more files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC 5/5] MIPS: qemu-malta_defconfig: enable e1000 network driver
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 4/5] net: rtl8169: make it work on big-endian system
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 2/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 3/5] net: e1000: make it work on MIPS
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 0/5] WIP: MIPS: implement dma mapping functions
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] include/linux/amba/bus.h: drop unused declarations
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/5] fs: fat: extend for in-PBL support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] include/linux/amba/bus.h: drop unused declarations
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] esdhc-pbl: remove now unused imx8_esdhc_load_piggy
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: nxp-imx8mq-evk: fix second stage booting
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: bcm2835 mbox: use pr_* to print messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] gpio: Add raspberrypi exp gpio driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: bcm2835 mbox: Remove response valid check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: rpi_defconfig: Enable raspberry GPIO exp driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Why the internal kernel header?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Why the internal kernel header?
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• [PATCH v3] habv4: imx change signing area from full to the executed image
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/2] ARM: zynq: zed: use zynq_cpu_lowlevel_init()
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 2/5] fs: fat: extend for in-PBL support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 4/5] ARM: at91: add helpers for MCI barebox chain-loading
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 1/5] pbl: add block I/O API
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 0/5] fs: fat: extend for in-PBL support
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [RFC PATCH 5/5] [WIP] ARM: at91: sama5d27-som1: add first stage entry point
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Watchdog Timer with x86 processor
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Watchdog Timer with x86 processor
  • From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: loongson: rename CPU_LOONGSON1 to CPU_GS232
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: nitrogen6: add lowlevel UART initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] lds: align RO_DATA_SECTION members
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: STM32MP1 SoC support in latest Barebox
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Marcin Niestrój <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/10] usb: Add dwc2 host driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] habv4: imx change signing area from full to the executed image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM64 early cache fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] lds: align RO_DATA_SECTION members
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] clk: zynq: add QSPI reference clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: aarch64: Add support for passing initrd to Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: Fix PBL size test
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/10] device: Introduce dma_offset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/10] rpi: Enable USB Power domain during startup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/10] usb: Add usbroothubdes.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/10] usb: Forward error code from usb_set_configuration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/10] of: Read dma_offset from device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/10] Add Raspberry Pi USB support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/10] of: Add of_bus_n_xxx_cells()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: rpi_defconfig: Enable networking support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/10] regulator: add function to get regulator by its name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/10] usb: Make timeout unit clear
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: nxp-imx8mq-evk: fix bootflow comment
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common variables
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: add function to look up device by DT node
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: add function to look up device by DT node
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH] driver: add function to look up device by DT node
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 0/3] ARM64 early cache fixes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>