On Mon, Apr 06, 2020 at 08:01:19AM +0200, Ahmad Fatoum wrote:
> Hello Sascha,
>
> On 2/13/20 11:58 AM, Sascha Hauer wrote:
> > So far we only honour the assigned-clocks and assigned-clock-rates
> > device tree properties for the clock controller nodes. With this patch
> > we also honour the properties for each device which is done by Linux
> > as well.
>
> This breaks the default barebox console on the i.MX7 sabresd.
> The default UART, uart1, specifies assigned-clock-parents, which is now applied
> and causes garbage to be output on the serial port.
>
> &uart1 {
> /delete-property/ assigned-clocks;
> /delete-property/ assigned-clock-parents;
> };
>
> Fixes it, but I didn't dig deeper than that.
Care to send this as a patch so that we at least have a stop gap
solution?
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
