Bareox mv88e6xxx switch driver not working properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,
  I have an armada 370 box, and it's using the marvell 88e6171r
switch, I'm trying  to port barebox to this box.
  But the mv88e6xxx driver not working properly on my box, below is
the miitool output:

    barebox@Marvell Armada 370/XP:/ miitool
    mdio0-phy15: f1072004.mdio@xxxxxxxx: powerdown, no link
    mdio0-phy16: f1072004.mdio@xxxxxxxx: 10 Mbit, half duplex, no link
    mdio1-phy00: f1072004.mdio@72004:switch0@xxxx: powerdown, no link
    mdio1-phy01: f1072004.mdio@72004:switch0@xxxx: powerdown, no link
    mdio1-phy02: f1072004.mdio@72004:switch0@xxxx: powerdown, no link
    mdio1-phy03: f1072004.mdio@72004:switch0@xxxx: powerdown, no link
    mdio1-phy04: f1072004.mdio@72004:switch0@xxxx: powerdown, no link

The attachment is the device tree of my box, the switch is working
properly on kernel 4.19 and above.
Can you give some suggestions for me? Thanks. Regards.

Attachment: armada-370-rtnasv3_dsa.dts
Description: audio/vnd.dts

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox

[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux